196 lines
6.2 KiB
INI
196 lines
6.2 KiB
INI
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
|
# Prusa MK3s Klipper Config
|
|
|
|
# The first thing you'll need to do is go through this file and comment out / uncomment
|
|
# the files and/or settings you need.
|
|
|
|
# You'll be able to print just fine with this config as it is, but it is recommended
|
|
# that you follow these steps to properly calibrate your printer:
|
|
|
|
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
|
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
|
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
|
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
|
|
|
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
|
|
|
### UI
|
|
# [include mainsail.cfg]
|
|
[include fluidd.cfg]
|
|
|
|
[mcu]
|
|
# serial: /dev/serial0 # If you are using internal RPI serial port
|
|
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
|
restart_method: command
|
|
|
|
### CONTROL BOARD
|
|
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
|
|
|
### BASE SETUP
|
|
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
|
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
|
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
|
|
|
### EXTRUSION
|
|
|
|
# Extruder
|
|
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
|
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
|
|
|
# Hotend
|
|
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
|
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
|
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
|
|
|
[extruder]
|
|
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
|
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
|
# pressure_advance: 0.05
|
|
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
|
#pid_Kp: 23.862
|
|
#pid_Ki: 1.020
|
|
#pid_Kd: 139.595
|
|
max_extrude_only_distance: 101
|
|
|
|
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
|
[probe]
|
|
#z_offset = 0.685
|
|
|
|
## For faster printing enable
|
|
# [printer]
|
|
# max_accel: 2000
|
|
# max_accel_to_decel: 2000
|
|
# max_z_velocity: 20
|
|
# max_z_accel: 300
|
|
|
|
## For stealth mode enable
|
|
|
|
# [tmc2130 stepper_x]
|
|
# interpolate: True
|
|
# stealthchop_threshold: 80
|
|
# [tmc2130 stepper_y]
|
|
# interpolate: True
|
|
# stealthchop_threshold: 80
|
|
# [tmc2130 stepper_z]
|
|
# interpolate: True
|
|
# stealthchop_threshold: 80
|
|
|
|
## Custom bed mest probes
|
|
## Prusa has 3x3 or 7x7, you can do any variation you want
|
|
# [bed_mesh]
|
|
# probe_count: 4,4
|
|
|
|
# Linear correction
|
|
# Check `extruders/linear-correction` for more informations.
|
|
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
|
|
|
### MACROS
|
|
[include klipper-prusa-mk3s/macros.cfg]
|
|
|
|
# FIRST RUN:
|
|
# Execute these sequentially in the console, let PID tuning finish before saving
|
|
# PID_CALIBRATE HEATER=extruder TARGET=170
|
|
# SAVE_CONFIG
|
|
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
|
# SAVE_CONFIG
|
|
|
|
# You can also skip the above setting for stock Prusa and use
|
|
[extruder]
|
|
#control: pid
|
|
min_temp: 0
|
|
max_temp: 305
|
|
min_extrude_temp: 170
|
|
rotation_distance=22.399821
|
|
|
|
[stepper_z]
|
|
position_max: 210
|
|
|
|
[heater_bed]
|
|
pid_Kp=54.241
|
|
pid_Ki=0.646
|
|
pid_Kd=1139.053
|
|
|
|
#####################################################################
|
|
# print_start macro
|
|
#####################################################################
|
|
|
|
## *** THINGS TO UNCOMMENT: ***
|
|
## Bed mesh (2 lines at 2 locations)
|
|
## Z_TILT_ADJUST if your printer is a Trident
|
|
## Quad gantry level if your printer is a V2
|
|
## Nevermore - if you have one
|
|
|
|
[gcode_macro PRINT_START]
|
|
gcode:
|
|
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
|
{% set target_bed = params.BED|int %}
|
|
{% set target_extruder = params.EXTRUDER|int %}
|
|
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
|
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
|
|
|
# Homes the printer, sets absolute positioning
|
|
G28 # Full home (XYZ)
|
|
G90 # Absolut position
|
|
|
|
## Uncomment for bed mesh (1 of 2)
|
|
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
|
|
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
|
M140 S{target_bed} # Sets bed target
|
|
|
|
## Uncomment for bed mesh (2 of 2)
|
|
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
|
bed_mesh_calibrate # Starts bed mesh
|
|
|
|
# Heats up the nozzle and bed to target via data from slicer
|
|
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
|
M104 S{target_extruder} # Sets extruder target
|
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
|
M107 # Turns off partcooling fan
|
|
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
|
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
|
|
|
# Gets ready to print by doing a purge line
|
|
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
|
G0 X0 Y0 F9000 # Moves to starting point
|
|
G1 Z0.2 F720
|
|
G1 Y-3 F1000 # Go outside print area
|
|
G1 X60 E9 F1000 # intro line
|
|
G1 X100 E12.5 F1000 # intro line
|
|
G92 E0
|
|
G90 # Absolute position
|
|
|
|
[gcode_macro PRINT_END]
|
|
gcode:
|
|
# Turn off bed, extruder, and fan
|
|
M140 S0
|
|
M104 S0
|
|
M107
|
|
# Move nozzle away from print while retracting
|
|
G91
|
|
G1 X-2 Y-2 E-3 F300
|
|
# Raise nozzle by 10mm
|
|
G1 Z10 F1000
|
|
G90
|
|
# Move to origin
|
|
G0 X0 Y0 F9000
|
|
# Disable steppers
|
|
M84
|
|
# Display info
|
|
SET_DISPLAY_TEXT MSG="Print done"
|
|
|
|
|
|
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
|
|
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
|
#*#
|
|
#*# [extruder]
|
|
#*# control = pid
|
|
#*# pid_kp = 25.678
|
|
#*# pid_ki = 1.297
|
|
#*# pid_kd = 127.106
|
|
#*#
|
|
#*# [probe]
|
|
#*# z_offset = 1.344
|