initialise repo
This commit is contained in:
prusa-automated
commit
76c58420f8
63
.moonraker.conf.bkp
Normal file
63
.moonraker.conf.bkp
Normal file
@ -0,0 +1,63 @@
|
||||
[server]
|
||||
host = 0.0.0.0
|
||||
port = 7125
|
||||
klippy_uds_address = /home/pi/printer_data/comms/klippy.sock
|
||||
|
||||
[authorization]
|
||||
trusted_clients =
|
||||
100.101.0.0/16
|
||||
10.0.0.0/8
|
||||
127.0.0.0/8
|
||||
169.254.0.0/16
|
||||
172.16.0.0/12
|
||||
192.168.0.0/16
|
||||
FE80::/10
|
||||
::1/128
|
||||
cors_domains =
|
||||
*.lan
|
||||
*.local
|
||||
*://localhost
|
||||
*://localhost:*
|
||||
*://my.mainsail.xyz
|
||||
*://app.fluidd.xyz
|
||||
|
||||
[octoprint_compat]
|
||||
|
||||
[history]
|
||||
|
||||
[update_manager]
|
||||
channel = dev
|
||||
refresh_interval = 168
|
||||
|
||||
[update_manager fluidd-config]
|
||||
type = git_repo
|
||||
primary_branch = master
|
||||
path = ~/fluidd-config
|
||||
origin = https://github.com/fluidd-core/fluidd-config.git
|
||||
managed_services = klipper
|
||||
|
||||
[update_manager fluidd]
|
||||
type = web
|
||||
channel = stable
|
||||
repo = fluidd-core/fluidd
|
||||
path = ~/fluidd
|
||||
|
||||
[update_manager prusa]
|
||||
type = git_repo
|
||||
origin = https://github.com/dz0ny/klipper-prusa-mk3s.git
|
||||
path = ~/printer_data/config/klipper-prusa-mk3s
|
||||
primary_branch = main
|
||||
is_system_service = False
|
||||
managed_services = klipper
|
||||
|
||||
[update_manager crowsnest]
|
||||
type = git_repo
|
||||
path = ~/crowsnest
|
||||
origin = https://github.com/mainsail-crew/crowsnest.git
|
||||
managed_services = crowsnest
|
||||
install_script = tools/pkglist.sh
|
||||
|
||||
[power RackLedLight]
|
||||
type = tasmota
|
||||
address = 100.101.101.38
|
||||
|
||||
48
crowsnest.conf
Normal file
48
crowsnest.conf
Normal file
@ -0,0 +1,48 @@
|
||||
#### crowsnest.conf
|
||||
#### This is a typical default config.
|
||||
#### Also used as default in mainsail / MainsailOS
|
||||
#### See:
|
||||
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
|
||||
#### for details to configure to your needs.
|
||||
|
||||
|
||||
#####################################################################
|
||||
#### #####
|
||||
#### Information about ports and according URL's #####
|
||||
#### #####
|
||||
#####################################################################
|
||||
#### #####
|
||||
#### Port 8080 equals /webcam/?action=[stream/snapshot] #####
|
||||
#### Port 8081 equals /webcam2/?action=[stream/snapshot] #####
|
||||
#### Port 8082 equals /webcam3/?action=[stream/snapshot] #####
|
||||
#### Port 8083 equals /webcam4/?action=[stream/snapshot] #####
|
||||
#### #####
|
||||
#### Note: These ports are default for most Mainsail #####
|
||||
#### installations. To use any other port would involve #####
|
||||
#### changing the proxy configuration or using directly #####
|
||||
#### http://<ip>:<port>/?action=[stream/snapshot] #####
|
||||
#### #####
|
||||
#####################################################################
|
||||
#### RTSP Stream URL: ( if enabled and supported ) #####
|
||||
#### rtsp://<ip>:<rtsp_port>/stream.h264 #####
|
||||
#####################################################################
|
||||
|
||||
|
||||
[crowsnest]
|
||||
log_path: /home/pi/printer_data/logs/crowsnest.log
|
||||
log_level: verbose # Valid Options are quiet/verbose/debug
|
||||
delete_log: false # Deletes log on every restart, if set to true
|
||||
no_proxy: false
|
||||
|
||||
[cam 1]
|
||||
mode: camera-streamer # ustreamer - Provides mjpg and snapshots. (All devices)
|
||||
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
|
||||
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
|
||||
rtsp_port: 8554 # Set different ports for each device!
|
||||
port: 8080 # HTTP/MJPG Stream/Snapshot Port
|
||||
device: /base/soc/i2c0mux/i2c@1/imx708@1a
|
||||
#resolution: 1280x720 # widthxheight format
|
||||
resolution: 4608x2592
|
||||
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
|
||||
#custom_flags: # You can run the Stream Services with custom flags.
|
||||
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
|
||||
1
fluidd.cfg
Symbolic link
1
fluidd.cfg
Symbolic link
@ -0,0 +1 @@
|
||||
/home/pi/fluidd-config/client.cfg
|
||||
1
klipper-prusa-mk3s
Submodule
1
klipper-prusa-mk3s
Submodule
@ -0,0 +1 @@
|
||||
Subproject commit 59a057cda3730df710119d7c6feae1ccaeb2c5b8
|
||||
64
moonraker.conf
Normal file
64
moonraker.conf
Normal file
@ -0,0 +1,64 @@
|
||||
[server]
|
||||
host: 0.0.0.0
|
||||
port: 7125
|
||||
klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
|
||||
|
||||
[authorization]
|
||||
trusted_clients:
|
||||
100.101.0.0/16
|
||||
10.0.0.0/8
|
||||
127.0.0.0/8
|
||||
169.254.0.0/16
|
||||
172.16.0.0/12
|
||||
192.168.0.0/16
|
||||
FE80::/10
|
||||
::1/128
|
||||
cors_domains:
|
||||
*.lan
|
||||
*.local
|
||||
*://localhost
|
||||
*://localhost:*
|
||||
*://my.mainsail.xyz
|
||||
*://app.fluidd.xyz
|
||||
|
||||
[octoprint_compat]
|
||||
|
||||
[history]
|
||||
|
||||
[update_manager]
|
||||
channel: dev
|
||||
refresh_interval: 168
|
||||
|
||||
[update_manager fluidd-config]
|
||||
type: git_repo
|
||||
primary_branch: master
|
||||
path: ~/fluidd-config
|
||||
origin: https://github.com/fluidd-core/fluidd-config.git
|
||||
managed_services: klipper
|
||||
|
||||
[update_manager fluidd]
|
||||
type: web
|
||||
channel: stable
|
||||
repo: fluidd-core/fluidd
|
||||
path: ~/fluidd
|
||||
|
||||
[update_manager prusa]
|
||||
type: git_repo
|
||||
origin: https://github.com/dz0ny/klipper-prusa-mk3s.git
|
||||
path: ~/printer_data/config/klipper-prusa-mk3s
|
||||
primary_branch: main
|
||||
is_system_service: False
|
||||
managed_services: klipper
|
||||
|
||||
# Crowsnest update_manager entry
|
||||
[update_manager crowsnest]
|
||||
type: git_repo
|
||||
path: ~/crowsnest
|
||||
origin: https://github.com/mainsail-crew/crowsnest.git
|
||||
managed_services: crowsnest
|
||||
install_script: tools/pkglist.sh
|
||||
|
||||
[power RackLedLight]
|
||||
type: tasmota
|
||||
address: 100.101.101.38
|
||||
#on_when_job_queued: True
|
||||
51
moonraker.conf.backup
Normal file
51
moonraker.conf.backup
Normal file
@ -0,0 +1,51 @@
|
||||
[server]
|
||||
host: 0.0.0.0
|
||||
port: 7125
|
||||
klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
|
||||
|
||||
[authorization]
|
||||
trusted_clients:
|
||||
100.101.0.0/16
|
||||
10.0.0.0/8
|
||||
127.0.0.0/8
|
||||
169.254.0.0/16
|
||||
172.16.0.0/12
|
||||
192.168.0.0/16
|
||||
FE80::/10
|
||||
::1/128
|
||||
cors_domains:
|
||||
*.lan
|
||||
*.local
|
||||
*://localhost
|
||||
*://localhost:*
|
||||
*://my.mainsail.xyz
|
||||
*://app.fluidd.xyz
|
||||
|
||||
[octoprint_compat]
|
||||
|
||||
[history]
|
||||
|
||||
[update_manager]
|
||||
channel: dev
|
||||
refresh_interval: 168
|
||||
|
||||
[update_manager fluidd-config]
|
||||
type: git_repo
|
||||
primary_branch: master
|
||||
path: ~/fluidd-config
|
||||
origin: https://github.com/fluidd-core/fluidd-config.git
|
||||
managed_services: klipper
|
||||
|
||||
[update_manager fluidd]
|
||||
type: web
|
||||
channel: stable
|
||||
repo: fluidd-core/fluidd
|
||||
path: ~/fluidd
|
||||
|
||||
[update_manager prusa]
|
||||
type: git_repo
|
||||
origin: https://github.com/dz0ny/klipper-prusa-mk3s.git
|
||||
path: ~/printer_data/config/klipper-prusa-mk3s
|
||||
primary_branch: main
|
||||
is_system_service: False
|
||||
managed_services: klipper
|
||||
104
printer-20240726_122400.cfg
Normal file
104
printer-20240726_122400.cfg
Normal file
@ -0,0 +1,104 @@
|
||||
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||
# Prusa MK3s Klipper Config
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
### UI
|
||||
# [include mainsail.cfg]
|
||||
[include fluidd.cfg]
|
||||
|
||||
[mcu]
|
||||
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||
restart_method: command
|
||||
|
||||
### CONTROL BOARD
|
||||
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||
|
||||
### BASE SETUP
|
||||
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||
|
||||
### EXTRUSION
|
||||
|
||||
# Extruder
|
||||
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||
|
||||
# Hotend
|
||||
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||
|
||||
[extruder]
|
||||
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||
# pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
pid_Kp: 23.862
|
||||
pid_Ki: 1.020
|
||||
pid_Kd: 139.595
|
||||
|
||||
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||
[probe]
|
||||
z_offset = 0.685
|
||||
|
||||
## For faster printing enable
|
||||
# [printer]
|
||||
# max_accel: 2000
|
||||
# max_accel_to_decel: 2000
|
||||
# max_z_velocity: 20
|
||||
# max_z_accel: 300
|
||||
|
||||
## For stealth mode enable
|
||||
|
||||
# [tmc2130 stepper_x]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_y]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_z]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
|
||||
## Custom bed mest probes
|
||||
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||
# [bed_mesh]
|
||||
# probe_count: 4,4
|
||||
|
||||
# Linear correction
|
||||
# Check `extruders/linear-correction` for more informations.
|
||||
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||
|
||||
### MACROS
|
||||
[include klipper-prusa-mk3s/macros.cfg]
|
||||
|
||||
# FIRST RUN:
|
||||
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||
# SAVE_CONFIG
|
||||
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||
# SAVE_CONFIG
|
||||
|
||||
# You can also skip the above setting for stock Prusa and use
|
||||
[extruder]
|
||||
control: pid
|
||||
min_temp: 0
|
||||
max_temp: 305
|
||||
min_extrude_temp: 170
|
||||
|
||||
|
||||
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||
120
printer-20240726_153750.cfg
Normal file
120
printer-20240726_153750.cfg
Normal file
@ -0,0 +1,120 @@
|
||||
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||
# Prusa MK3s Klipper Config
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
### UI
|
||||
# [include mainsail.cfg]
|
||||
[include fluidd.cfg]
|
||||
|
||||
[mcu]
|
||||
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||
restart_method: command
|
||||
|
||||
### CONTROL BOARD
|
||||
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||
|
||||
### BASE SETUP
|
||||
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||
|
||||
### EXTRUSION
|
||||
|
||||
# Extruder
|
||||
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||
|
||||
# Hotend
|
||||
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||
|
||||
[extruder]
|
||||
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||
# pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
#pid_Kp: 23.862
|
||||
#pid_Ki: 1.020
|
||||
#pid_Kd: 139.595
|
||||
|
||||
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||
[probe]
|
||||
z_offset = 0.685
|
||||
|
||||
## For faster printing enable
|
||||
# [printer]
|
||||
# max_accel: 2000
|
||||
# max_accel_to_decel: 2000
|
||||
# max_z_velocity: 20
|
||||
# max_z_accel: 300
|
||||
|
||||
## For stealth mode enable
|
||||
|
||||
# [tmc2130 stepper_x]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_y]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_z]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
|
||||
## Custom bed mest probes
|
||||
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||
# [bed_mesh]
|
||||
# probe_count: 4,4
|
||||
|
||||
# Linear correction
|
||||
# Check `extruders/linear-correction` for more informations.
|
||||
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||
|
||||
### MACROS
|
||||
[include klipper-prusa-mk3s/macros.cfg]
|
||||
|
||||
# FIRST RUN:
|
||||
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||
# SAVE_CONFIG
|
||||
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||
# SAVE_CONFIG
|
||||
|
||||
# You can also skip the above setting for stock Prusa and use
|
||||
[extruder]
|
||||
#control: pid
|
||||
min_temp: 0
|
||||
max_temp: 305
|
||||
min_extrude_temp: 170
|
||||
|
||||
[stepper_z]
|
||||
position_max: 210
|
||||
|
||||
[heater_bed]
|
||||
pid_Kp=54.241
|
||||
pid_Ki=0.646
|
||||
pid_Kd=1139.053
|
||||
|
||||
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 25.678
|
||||
#*# pid_ki = 1.297
|
||||
#*# pid_kd = 127.106
|
||||
195
printer-20250118_131940.cfg
Normal file
195
printer-20250118_131940.cfg
Normal file
@ -0,0 +1,195 @@
|
||||
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||
# Prusa MK3s Klipper Config
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
### UI
|
||||
# [include mainsail.cfg]
|
||||
[include fluidd.cfg]
|
||||
|
||||
[mcu]
|
||||
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||
restart_method: command
|
||||
|
||||
### CONTROL BOARD
|
||||
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||
|
||||
### BASE SETUP
|
||||
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||
|
||||
### EXTRUSION
|
||||
|
||||
# Extruder
|
||||
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||
|
||||
# Hotend
|
||||
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||
|
||||
[extruder]
|
||||
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||
# pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
#pid_Kp: 23.862
|
||||
#pid_Ki: 1.020
|
||||
#pid_Kd: 139.595
|
||||
max_extrude_only_distance: 101
|
||||
|
||||
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||
[probe]
|
||||
#z_offset = 0.685
|
||||
|
||||
## For faster printing enable
|
||||
# [printer]
|
||||
# max_accel: 2000
|
||||
# max_accel_to_decel: 2000
|
||||
# max_z_velocity: 20
|
||||
# max_z_accel: 300
|
||||
|
||||
## For stealth mode enable
|
||||
|
||||
# [tmc2130 stepper_x]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_y]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_z]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
|
||||
## Custom bed mest probes
|
||||
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||
# [bed_mesh]
|
||||
# probe_count: 4,4
|
||||
|
||||
# Linear correction
|
||||
# Check `extruders/linear-correction` for more informations.
|
||||
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||
|
||||
### MACROS
|
||||
[include klipper-prusa-mk3s/macros.cfg]
|
||||
|
||||
# FIRST RUN:
|
||||
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||
# SAVE_CONFIG
|
||||
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||
# SAVE_CONFIG
|
||||
|
||||
# You can also skip the above setting for stock Prusa and use
|
||||
[extruder]
|
||||
#control: pid
|
||||
min_temp: 0
|
||||
max_temp: 305
|
||||
min_extrude_temp: 170
|
||||
rotation_distance=22.399821
|
||||
|
||||
[stepper_z]
|
||||
position_max: 210
|
||||
|
||||
[heater_bed]
|
||||
pid_Kp=54.241
|
||||
pid_Ki=0.646
|
||||
pid_Kd=1139.053
|
||||
|
||||
#####################################################################
|
||||
# print_start macro
|
||||
#####################################################################
|
||||
|
||||
## *** THINGS TO UNCOMMENT: ***
|
||||
## Bed mesh (2 lines at 2 locations)
|
||||
## Z_TILT_ADJUST if your printer is a Trident
|
||||
## Quad gantry level if your printer is a V2
|
||||
## Nevermore - if you have one
|
||||
|
||||
[gcode_macro PRINT_START]
|
||||
gcode:
|
||||
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||
{% set target_bed = params.BED|int %}
|
||||
{% set target_extruder = params.EXTRUDER|int %}
|
||||
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||
|
||||
# Homes the printer, sets absolute positioning
|
||||
G28 # Full home (XYZ)
|
||||
G90 # Absolut position
|
||||
|
||||
## Uncomment for bed mesh (1 of 2)
|
||||
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||
|
||||
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||
M140 S{target_bed} # Sets bed target
|
||||
|
||||
## Uncomment for bed mesh (2 of 2)
|
||||
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||
bed_mesh_calibrate # Starts bed mesh
|
||||
|
||||
# Heats up the nozzle and bed to target via data from slicer
|
||||
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||
M104 S{target_extruder} # Sets extruder target
|
||||
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||
M107 # Turns off partcooling fan
|
||||
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
||||
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
||||
|
||||
# Gets ready to print by doing a purge line
|
||||
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||
G0 X0 Y0 F9000 # Moves to starting point
|
||||
G1 Z0.2 F720
|
||||
G1 Y-3 F1000 # Go outside print area
|
||||
G1 X60 E9 F1000 # intro line
|
||||
G1 X100 E12.5 F1000 # intro line
|
||||
G92 E0
|
||||
G90 # Absolute position
|
||||
|
||||
[gcode_macro PRINT_END]
|
||||
gcode:
|
||||
# Turn off bed, extruder, and fan
|
||||
M140 S0
|
||||
M104 S0
|
||||
M107
|
||||
# Move nozzle away from print while retracting
|
||||
G91
|
||||
G1 X-2 Y-2 E-3 F300
|
||||
# Raise nozzle by 10mm
|
||||
G1 Z10 F1000
|
||||
G90
|
||||
# Move to origin
|
||||
G0 X0 Y0 F9000
|
||||
# Disable steppers
|
||||
M84
|
||||
# Display info
|
||||
SET_DISPLAY_TEXT MSG="Print done"
|
||||
|
||||
|
||||
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 25.678
|
||||
#*# pid_ki = 1.297
|
||||
#*# pid_kd = 127.106
|
||||
#*#
|
||||
#*# [probe]
|
||||
#*# z_offset = 1.344
|
||||
214
printer.cfg
Normal file
214
printer.cfg
Normal file
@ -0,0 +1,214 @@
|
||||
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||
# Prusa MK3s Klipper Config
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
### UI
|
||||
# [include mainsail.cfg]
|
||||
[include fluidd.cfg]
|
||||
|
||||
[mcu]
|
||||
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||
restart_method: command
|
||||
|
||||
### CONTROL BOARD
|
||||
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||
|
||||
### BASE SETUP
|
||||
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||
|
||||
### EXTRUSION
|
||||
|
||||
# Extruder
|
||||
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||
|
||||
# Hotend
|
||||
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||
|
||||
[extruder]
|
||||
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||
# pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
#pid_Kp: 23.862
|
||||
#pid_Ki: 1.020
|
||||
#pid_Kd: 139.595
|
||||
max_extrude_only_distance: 101
|
||||
|
||||
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||
[probe]
|
||||
#z_offset = 0.685
|
||||
|
||||
## For faster printing enable
|
||||
# [printer]
|
||||
# max_accel: 2000
|
||||
# max_accel_to_decel: 2000
|
||||
# max_z_velocity: 20
|
||||
# max_z_accel: 300
|
||||
|
||||
## For stealth mode enable
|
||||
|
||||
# [tmc2130 stepper_x]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_y]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
# [tmc2130 stepper_z]
|
||||
# interpolate: True
|
||||
# stealthchop_threshold: 80
|
||||
|
||||
## Custom bed mest probes
|
||||
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||
# [bed_mesh]
|
||||
# probe_count: 4,4
|
||||
|
||||
# Linear correction
|
||||
# Check `extruders/linear-correction` for more informations.
|
||||
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||
|
||||
### MACROS
|
||||
[include klipper-prusa-mk3s/macros.cfg]
|
||||
|
||||
# FIRST RUN:
|
||||
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||
# SAVE_CONFIG
|
||||
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||
# SAVE_CONFIG
|
||||
|
||||
# You can also skip the above setting for stock Prusa and use
|
||||
[extruder]
|
||||
#control: pid
|
||||
min_temp: 0
|
||||
max_temp: 305
|
||||
min_extrude_temp: 170
|
||||
rotation_distance=22.399821
|
||||
|
||||
[stepper_z]
|
||||
position_max: 210
|
||||
|
||||
[heater_bed]
|
||||
pid_Kp=54.241
|
||||
pid_Ki=0.646
|
||||
pid_Kd=1139.053
|
||||
|
||||
#####################################################################
|
||||
# print_start macro
|
||||
#####################################################################
|
||||
|
||||
## *** THINGS TO UNCOMMENT: ***
|
||||
## Bed mesh (2 lines at 2 locations)
|
||||
## Z_TILT_ADJUST if your printer is a Trident
|
||||
## Quad gantry level if your printer is a V2
|
||||
## Nevermore - if you have one
|
||||
|
||||
[gcode_macro PRINT_START]
|
||||
gcode:
|
||||
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||
{% set target_bed = params.BED|int %}
|
||||
{% set target_extruder = params.EXTRUDER|int %}
|
||||
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||
|
||||
# Homes the printer, sets absolute positioning
|
||||
G28 # Full home (XYZ)
|
||||
G90 # Absolut position
|
||||
|
||||
## Uncomment for bed mesh (1 of 2)
|
||||
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||
|
||||
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||
M140 S{target_bed} # Sets bed target
|
||||
|
||||
## Uncomment for bed mesh (2 of 2)
|
||||
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||
bed_mesh_calibrate # Starts bed mesh
|
||||
|
||||
# Heats up the nozzle and bed to target via data from slicer
|
||||
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||
M104 S{target_extruder} # Sets extruder target
|
||||
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||
M107 # Turns off partcooling fan
|
||||
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
||||
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
||||
|
||||
# Gets ready to print by doing a purge line
|
||||
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||
G0 X0 Y0 F9000 # Moves to starting point
|
||||
G1 Z0.2 F720
|
||||
G1 Y-3 F1000 # Go outside print area
|
||||
G1 X60 E9 F1000 # intro line
|
||||
G1 X100 E12.5 F1000 # intro line
|
||||
G92 E0
|
||||
G90 # Absolute position
|
||||
|
||||
[gcode_macro PRINT_END]
|
||||
gcode:
|
||||
# Turn off bed, extruder, and fan
|
||||
M140 S0
|
||||
M104 S0
|
||||
M107
|
||||
# Move nozzle away from print while retracting
|
||||
G91
|
||||
G1 X-2 Y-2 E-3 F300
|
||||
# Raise nozzle by 10mm
|
||||
G1 Z10 F1000
|
||||
G90
|
||||
# Move to origin
|
||||
G0 X0 Y0 F9000
|
||||
# Disable steppers
|
||||
M84
|
||||
# Display info
|
||||
SET_DISPLAY_TEXT MSG="Print done"
|
||||
|
||||
[exclude_object]
|
||||
|
||||
|
||||
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 25.678
|
||||
#*# pid_ki = 1.297
|
||||
#*# pid_kd = 127.106
|
||||
#*#
|
||||
#*# [probe]
|
||||
#*# z_offset = 1.344
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.664167, 0.159444, -0.203750
|
||||
#*# 0.640833, 0.175000, -0.247500
|
||||
#*# 0.631667, 0.240000, -0.174167
|
||||
#*# x_count = 3
|
||||
#*# y_count = 3
|
||||
#*# mesh_x_pps = 3
|
||||
#*# mesh_y_pps = 3
|
||||
#*# algo = bicubic
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 24.0
|
||||
#*# max_x = 228.0
|
||||
#*# min_y = 6.0
|
||||
#*# max_y = 210.0
|
||||
Loading…
x
Reference in New Issue
Block a user