Automatic backup: 2025-09-25_20:00:01
This commit is contained in:
prusa-automated
214
printer-20250925_190144.cfg
Normal file
214
printer-20250925_190144.cfg
Normal file
@@ -0,0 +1,214 @@
|
|||||||
|
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||||
|
# Prusa MK3s Klipper Config
|
||||||
|
|
||||||
|
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||||
|
# the files and/or settings you need.
|
||||||
|
|
||||||
|
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||||
|
# that you follow these steps to properly calibrate your printer:
|
||||||
|
|
||||||
|
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||||
|
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||||
|
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||||
|
|
||||||
|
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||||
|
|
||||||
|
### UI
|
||||||
|
# [include mainsail.cfg]
|
||||||
|
[include fluidd.cfg]
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||||
|
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||||
|
restart_method: command
|
||||||
|
|
||||||
|
### CONTROL BOARD
|
||||||
|
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||||
|
|
||||||
|
### BASE SETUP
|
||||||
|
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||||
|
|
||||||
|
### EXTRUSION
|
||||||
|
|
||||||
|
# Extruder
|
||||||
|
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||||
|
|
||||||
|
# Hotend
|
||||||
|
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||||
|
# pressure_advance: 0.05
|
||||||
|
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||||
|
#pid_Kp: 23.862
|
||||||
|
#pid_Ki: 1.020
|
||||||
|
#pid_Kd: 139.595
|
||||||
|
max_extrude_only_distance: 101
|
||||||
|
|
||||||
|
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||||
|
[probe]
|
||||||
|
#z_offset = 0.685
|
||||||
|
|
||||||
|
## For faster printing enable
|
||||||
|
# [printer]
|
||||||
|
# max_accel: 2000
|
||||||
|
# max_accel_to_decel: 2000
|
||||||
|
# max_z_velocity: 20
|
||||||
|
# max_z_accel: 300
|
||||||
|
|
||||||
|
## For stealth mode enable
|
||||||
|
|
||||||
|
# [tmc2130 stepper_x]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_y]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_z]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
|
||||||
|
## Custom bed mest probes
|
||||||
|
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||||
|
# [bed_mesh]
|
||||||
|
# probe_count: 4,4
|
||||||
|
|
||||||
|
# Linear correction
|
||||||
|
# Check `extruders/linear-correction` for more informations.
|
||||||
|
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||||
|
|
||||||
|
### MACROS
|
||||||
|
[include klipper-prusa-mk3s/macros.cfg]
|
||||||
|
|
||||||
|
# FIRST RUN:
|
||||||
|
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||||
|
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||||
|
# SAVE_CONFIG
|
||||||
|
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||||
|
# SAVE_CONFIG
|
||||||
|
|
||||||
|
# You can also skip the above setting for stock Prusa and use
|
||||||
|
[extruder]
|
||||||
|
#control: pid
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 305
|
||||||
|
min_extrude_temp: 170
|
||||||
|
rotation_distance=22.399821
|
||||||
|
|
||||||
|
[stepper_z]
|
||||||
|
position_max: 210
|
||||||
|
|
||||||
|
[heater_bed]
|
||||||
|
pid_Kp=54.241
|
||||||
|
pid_Ki=0.646
|
||||||
|
pid_Kd=1139.053
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# print_start macro
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## *** THINGS TO UNCOMMENT: ***
|
||||||
|
## Bed mesh (2 lines at 2 locations)
|
||||||
|
## Z_TILT_ADJUST if your printer is a Trident
|
||||||
|
## Quad gantry level if your printer is a V2
|
||||||
|
## Nevermore - if you have one
|
||||||
|
|
||||||
|
[gcode_macro PRINT_START]
|
||||||
|
gcode:
|
||||||
|
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||||
|
{% set target_bed = params.BED|int %}
|
||||||
|
{% set target_extruder = params.EXTRUDER|int %}
|
||||||
|
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||||
|
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||||
|
|
||||||
|
# Homes the printer, sets absolute positioning
|
||||||
|
G28 # Full home (XYZ)
|
||||||
|
G90 # Absolut position
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (1 of 2)
|
||||||
|
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||||
|
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||||
|
M140 S{target_bed} # Sets bed target
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (2 of 2)
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||||
|
bed_mesh_calibrate # Starts bed mesh
|
||||||
|
|
||||||
|
# Heats up the nozzle and bed to target via data from slicer
|
||||||
|
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||||
|
M104 S{target_extruder} # Sets extruder target
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M107 # Turns off partcooling fan
|
||||||
|
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
||||||
|
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
||||||
|
|
||||||
|
# Gets ready to print by doing a purge line
|
||||||
|
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||||
|
G0 X0 Y0 F9000 # Moves to starting point
|
||||||
|
G1 Z0.2 F720
|
||||||
|
G1 Y-3 F1000 # Go outside print area
|
||||||
|
G1 X60 E9 F1000 # intro line
|
||||||
|
G1 X100 E12.5 F1000 # intro line
|
||||||
|
G92 E0
|
||||||
|
G90 # Absolute position
|
||||||
|
|
||||||
|
[gcode_macro PRINT_END]
|
||||||
|
gcode:
|
||||||
|
# Turn off bed, extruder, and fan
|
||||||
|
M140 S0
|
||||||
|
M104 S0
|
||||||
|
M107
|
||||||
|
# Move nozzle away from print while retracting
|
||||||
|
G91
|
||||||
|
G1 X-2 Y-2 E-3 F300
|
||||||
|
# Raise nozzle by 10mm
|
||||||
|
G1 Z10 F1000
|
||||||
|
G90
|
||||||
|
# Move to origin
|
||||||
|
G0 X0 Y0 F9000
|
||||||
|
# Disable steppers
|
||||||
|
M84
|
||||||
|
# Display info
|
||||||
|
SET_DISPLAY_TEXT MSG="Print done"
|
||||||
|
|
||||||
|
[exclude_object]
|
||||||
|
|
||||||
|
|
||||||
|
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 25.678
|
||||||
|
#*# pid_ki = 1.297
|
||||||
|
#*# pid_kd = 127.106
|
||||||
|
#*#
|
||||||
|
#*# [probe]
|
||||||
|
#*# z_offset = 1.344
|
||||||
|
#*#
|
||||||
|
#*# [bed_mesh default]
|
||||||
|
#*# version = 1
|
||||||
|
#*# points =
|
||||||
|
#*# 0.664167, 0.159444, -0.203750
|
||||||
|
#*# 0.640833, 0.175000, -0.247500
|
||||||
|
#*# 0.631667, 0.240000, -0.174167
|
||||||
|
#*# x_count = 3
|
||||||
|
#*# y_count = 3
|
||||||
|
#*# mesh_x_pps = 3
|
||||||
|
#*# mesh_y_pps = 3
|
||||||
|
#*# algo = bicubic
|
||||||
|
#*# tension = 0.2
|
||||||
|
#*# min_x = 24.0
|
||||||
|
#*# max_x = 228.0
|
||||||
|
#*# min_y = 6.0
|
||||||
|
#*# max_y = 210.0
|
||||||
214
printer-20250925_190622.cfg
Normal file
214
printer-20250925_190622.cfg
Normal file
@@ -0,0 +1,214 @@
|
|||||||
|
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||||
|
# Prusa MK3s Klipper Config
|
||||||
|
|
||||||
|
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||||
|
# the files and/or settings you need.
|
||||||
|
|
||||||
|
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||||
|
# that you follow these steps to properly calibrate your printer:
|
||||||
|
|
||||||
|
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||||
|
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||||
|
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||||
|
|
||||||
|
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||||
|
|
||||||
|
### UI
|
||||||
|
# [include mainsail.cfg]
|
||||||
|
[include fluidd.cfg]
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||||
|
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||||
|
restart_method: command
|
||||||
|
|
||||||
|
### CONTROL BOARD
|
||||||
|
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||||
|
|
||||||
|
### BASE SETUP
|
||||||
|
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||||
|
|
||||||
|
### EXTRUSION
|
||||||
|
|
||||||
|
# Extruder
|
||||||
|
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||||
|
|
||||||
|
# Hotend
|
||||||
|
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||||
|
# pressure_advance: 0.05
|
||||||
|
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||||
|
#pid_Kp: 23.862
|
||||||
|
#pid_Ki: 1.020
|
||||||
|
#pid_Kd: 139.595
|
||||||
|
max_extrude_only_distance: 101
|
||||||
|
|
||||||
|
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||||
|
[probe]
|
||||||
|
#z_offset = 0.685
|
||||||
|
|
||||||
|
## For faster printing enable
|
||||||
|
# [printer]
|
||||||
|
# max_accel: 2000
|
||||||
|
# max_accel_to_decel: 2000
|
||||||
|
# max_z_velocity: 20
|
||||||
|
# max_z_accel: 300
|
||||||
|
|
||||||
|
## For stealth mode enable
|
||||||
|
|
||||||
|
# [tmc2130 stepper_x]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_y]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_z]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
|
||||||
|
## Custom bed mest probes
|
||||||
|
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||||
|
# [bed_mesh]
|
||||||
|
# probe_count: 4,4
|
||||||
|
|
||||||
|
# Linear correction
|
||||||
|
# Check `extruders/linear-correction` for more informations.
|
||||||
|
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||||
|
|
||||||
|
### MACROS
|
||||||
|
[include klipper-prusa-mk3s/macros.cfg]
|
||||||
|
|
||||||
|
# FIRST RUN:
|
||||||
|
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||||
|
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||||
|
# SAVE_CONFIG
|
||||||
|
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||||
|
# SAVE_CONFIG
|
||||||
|
|
||||||
|
# You can also skip the above setting for stock Prusa and use
|
||||||
|
[extruder]
|
||||||
|
#control: pid
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 305
|
||||||
|
min_extrude_temp: 170
|
||||||
|
rotation_distance=22.399821
|
||||||
|
|
||||||
|
[stepper_z]
|
||||||
|
position_max: 210
|
||||||
|
|
||||||
|
[heater_bed]
|
||||||
|
pid_Kp=54.241
|
||||||
|
pid_Ki=0.646
|
||||||
|
pid_Kd=1139.053
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# print_start macro
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## *** THINGS TO UNCOMMENT: ***
|
||||||
|
## Bed mesh (2 lines at 2 locations)
|
||||||
|
## Z_TILT_ADJUST if your printer is a Trident
|
||||||
|
## Quad gantry level if your printer is a V2
|
||||||
|
## Nevermore - if you have one
|
||||||
|
|
||||||
|
[gcode_macro PRINT_START]
|
||||||
|
gcode:
|
||||||
|
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||||
|
{% set target_bed = params.BED|int %}
|
||||||
|
{% set target_extruder = params.EXTRUDER|int %}
|
||||||
|
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||||
|
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||||
|
|
||||||
|
# Homes the printer, sets absolute positioning
|
||||||
|
G28 # Full home (XYZ)
|
||||||
|
G90 # Absolut position
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (1 of 2)
|
||||||
|
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||||
|
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||||
|
M140 S{target_bed} # Sets bed target
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (2 of 2)
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||||
|
bed_mesh_calibrate # Starts bed mesh
|
||||||
|
|
||||||
|
# Heats up the nozzle and bed to target via data from slicer
|
||||||
|
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||||
|
M104 S{target_extruder} # Sets extruder target
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M107 # Turns off partcooling fan
|
||||||
|
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
||||||
|
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
||||||
|
|
||||||
|
# Gets ready to print by doing a purge line
|
||||||
|
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||||
|
G0 X0 Y0 F9000 # Moves to starting point
|
||||||
|
G1 Z0.2 F720
|
||||||
|
G1 Y-3 F1000 # Go outside print area
|
||||||
|
G1 X60 E9 F1000 # intro line
|
||||||
|
G1 X100 E12.5 F1000 # intro line
|
||||||
|
G92 E0
|
||||||
|
G90 # Absolute position
|
||||||
|
|
||||||
|
[gcode_macro PRINT_END]
|
||||||
|
gcode:
|
||||||
|
# Turn off bed, extruder, and fan
|
||||||
|
M140 S0
|
||||||
|
M104 S0
|
||||||
|
M107
|
||||||
|
# Move nozzle away from print while retracting
|
||||||
|
G91
|
||||||
|
G1 X-2 Y-2 E-3 F300
|
||||||
|
# Raise nozzle by 10mm
|
||||||
|
G1 Z10 F1000
|
||||||
|
G90
|
||||||
|
# Move to origin
|
||||||
|
G0 X0 Y0 F9000
|
||||||
|
# Disable steppers
|
||||||
|
M84
|
||||||
|
# Display info
|
||||||
|
SET_DISPLAY_TEXT MSG="Print done"
|
||||||
|
|
||||||
|
[exclude_object]
|
||||||
|
|
||||||
|
|
||||||
|
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 25.678
|
||||||
|
#*# pid_ki = 1.297
|
||||||
|
#*# pid_kd = 127.106
|
||||||
|
#*#
|
||||||
|
#*# [probe]
|
||||||
|
#*# z_offset = 0.844
|
||||||
|
#*#
|
||||||
|
#*# [bed_mesh default]
|
||||||
|
#*# version = 1
|
||||||
|
#*# points =
|
||||||
|
#*# 0.664167, 0.159444, -0.203750
|
||||||
|
#*# 0.640833, 0.175000, -0.247500
|
||||||
|
#*# 0.631667, 0.240000, -0.174167
|
||||||
|
#*# x_count = 3
|
||||||
|
#*# y_count = 3
|
||||||
|
#*# mesh_x_pps = 3
|
||||||
|
#*# mesh_y_pps = 3
|
||||||
|
#*# algo = bicubic
|
||||||
|
#*# tension = 0.2
|
||||||
|
#*# min_x = 24.0
|
||||||
|
#*# max_x = 228.0
|
||||||
|
#*# min_y = 6.0
|
||||||
|
#*# max_y = 210.0
|
||||||
214
printer-20250925_191018.cfg
Normal file
214
printer-20250925_191018.cfg
Normal file
@@ -0,0 +1,214 @@
|
|||||||
|
# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
|
||||||
|
# Prusa MK3s Klipper Config
|
||||||
|
|
||||||
|
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||||
|
# the files and/or settings you need.
|
||||||
|
|
||||||
|
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||||
|
# that you follow these steps to properly calibrate your printer:
|
||||||
|
|
||||||
|
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||||
|
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
|
||||||
|
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||||
|
|
||||||
|
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||||
|
|
||||||
|
### UI
|
||||||
|
# [include mainsail.cfg]
|
||||||
|
[include fluidd.cfg]
|
||||||
|
|
||||||
|
[mcu]
|
||||||
|
# serial: /dev/serial0 # If you are using internal RPI serial port
|
||||||
|
serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
|
||||||
|
restart_method: command
|
||||||
|
|
||||||
|
### CONTROL BOARD
|
||||||
|
[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
|
||||||
|
|
||||||
|
### BASE SETUP
|
||||||
|
[include klipper-prusa-mk3s/mk3s/display.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/steppers.cfg]
|
||||||
|
[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
|
||||||
|
|
||||||
|
### EXTRUSION
|
||||||
|
|
||||||
|
# Extruder
|
||||||
|
[include klipper-prusa-mk3s/extruders/prusa.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/extruders/bmg.cfg]
|
||||||
|
|
||||||
|
# Hotend
|
||||||
|
[include klipper-prusa-mk3s/hotends/v6.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
|
||||||
|
# [include klipper-prusa-mk3s/hotends/rapido.cfg]
|
||||||
|
|
||||||
|
[extruder]
|
||||||
|
# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
|
||||||
|
# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
|
||||||
|
# pressure_advance: 0.05
|
||||||
|
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||||
|
#pid_Kp: 23.862
|
||||||
|
#pid_Ki: 1.020
|
||||||
|
#pid_Kd: 139.595
|
||||||
|
max_extrude_only_distance: 101
|
||||||
|
|
||||||
|
## copy this from your current setting on Prusa, but make it absolute (removing -)
|
||||||
|
[probe]
|
||||||
|
#z_offset = 0.685
|
||||||
|
|
||||||
|
## For faster printing enable
|
||||||
|
# [printer]
|
||||||
|
# max_accel: 2000
|
||||||
|
# max_accel_to_decel: 2000
|
||||||
|
# max_z_velocity: 20
|
||||||
|
# max_z_accel: 300
|
||||||
|
|
||||||
|
## For stealth mode enable
|
||||||
|
|
||||||
|
# [tmc2130 stepper_x]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_y]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
# [tmc2130 stepper_z]
|
||||||
|
# interpolate: True
|
||||||
|
# stealthchop_threshold: 80
|
||||||
|
|
||||||
|
## Custom bed mest probes
|
||||||
|
## Prusa has 3x3 or 7x7, you can do any variation you want
|
||||||
|
# [bed_mesh]
|
||||||
|
# probe_count: 4,4
|
||||||
|
|
||||||
|
# Linear correction
|
||||||
|
# Check `extruders/linear-correction` for more informations.
|
||||||
|
[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
|
||||||
|
|
||||||
|
### MACROS
|
||||||
|
[include klipper-prusa-mk3s/macros.cfg]
|
||||||
|
|
||||||
|
# FIRST RUN:
|
||||||
|
# Execute these sequentially in the console, let PID tuning finish before saving
|
||||||
|
# PID_CALIBRATE HEATER=extruder TARGET=170
|
||||||
|
# SAVE_CONFIG
|
||||||
|
# PID_CALIBRATE HEATER=heater_bed TARGET=60
|
||||||
|
# SAVE_CONFIG
|
||||||
|
|
||||||
|
# You can also skip the above setting for stock Prusa and use
|
||||||
|
[extruder]
|
||||||
|
#control: pid
|
||||||
|
min_temp: 0
|
||||||
|
max_temp: 305
|
||||||
|
min_extrude_temp: 170
|
||||||
|
rotation_distance=22.399821
|
||||||
|
|
||||||
|
[stepper_z]
|
||||||
|
position_max: 210
|
||||||
|
|
||||||
|
[heater_bed]
|
||||||
|
pid_Kp=54.241
|
||||||
|
pid_Ki=0.646
|
||||||
|
pid_Kd=1139.053
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# print_start macro
|
||||||
|
#####################################################################
|
||||||
|
|
||||||
|
## *** THINGS TO UNCOMMENT: ***
|
||||||
|
## Bed mesh (2 lines at 2 locations)
|
||||||
|
## Z_TILT_ADJUST if your printer is a Trident
|
||||||
|
## Quad gantry level if your printer is a V2
|
||||||
|
## Nevermore - if you have one
|
||||||
|
|
||||||
|
[gcode_macro PRINT_START]
|
||||||
|
gcode:
|
||||||
|
# This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
|
||||||
|
{% set target_bed = params.BED|int %}
|
||||||
|
{% set target_extruder = params.EXTRUDER|int %}
|
||||||
|
{% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
|
||||||
|
{% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
|
||||||
|
|
||||||
|
# Homes the printer, sets absolute positioning
|
||||||
|
G28 # Full home (XYZ)
|
||||||
|
G90 # Absolut position
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (1 of 2)
|
||||||
|
BED_MESH_CLEAR # Clears old saved bed mesh (if any)
|
||||||
|
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c" # Displays info
|
||||||
|
M140 S{target_bed} # Sets bed target
|
||||||
|
|
||||||
|
## Uncomment for bed mesh (2 of 2)
|
||||||
|
SET_DISPLAY_TEXT MSG="Bed mesh" # Displays info
|
||||||
|
bed_mesh_calibrate # Starts bed mesh
|
||||||
|
|
||||||
|
# Heats up the nozzle and bed to target via data from slicer
|
||||||
|
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Displays info
|
||||||
|
M104 S{target_extruder} # Sets extruder target
|
||||||
|
G1 X{x_wait} Y{y_wait} Z15 F9000 # Goes to center of the bed
|
||||||
|
M107 # Turns off partcooling fan
|
||||||
|
M190 S{target_bed} # Heats bed to printing temp (if not already hot enough)
|
||||||
|
M109 S{target_extruder} # Heats the nozzle to printing temp (if not already hot enough)
|
||||||
|
|
||||||
|
# Gets ready to print by doing a purge line
|
||||||
|
SET_DISPLAY_TEXT MSG="Printer goes brr" # Displays info
|
||||||
|
G0 X0 Y0 F9000 # Moves to starting point
|
||||||
|
G1 Z0.2 F720
|
||||||
|
G1 Y-3 F1000 # Go outside print area
|
||||||
|
G1 X60 E9 F1000 # intro line
|
||||||
|
G1 X100 E12.5 F1000 # intro line
|
||||||
|
G92 E0
|
||||||
|
G90 # Absolute position
|
||||||
|
|
||||||
|
[gcode_macro PRINT_END]
|
||||||
|
gcode:
|
||||||
|
# Turn off bed, extruder, and fan
|
||||||
|
M140 S0
|
||||||
|
M104 S0
|
||||||
|
M107
|
||||||
|
# Move nozzle away from print while retracting
|
||||||
|
G91
|
||||||
|
G1 X-2 Y-2 E-3 F300
|
||||||
|
# Raise nozzle by 10mm
|
||||||
|
G1 Z10 F1000
|
||||||
|
G90
|
||||||
|
# Move to origin
|
||||||
|
G0 X0 Y0 F9000
|
||||||
|
# Disable steppers
|
||||||
|
M84
|
||||||
|
# Display info
|
||||||
|
SET_DISPLAY_TEXT MSG="Print done"
|
||||||
|
|
||||||
|
[exclude_object]
|
||||||
|
|
||||||
|
|
||||||
|
### The end, on the end the printer will store it's tuning data, so do not edit it.
|
||||||
|
|
||||||
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
|
#*#
|
||||||
|
#*# [extruder]
|
||||||
|
#*# control = pid
|
||||||
|
#*# pid_kp = 25.678
|
||||||
|
#*# pid_ki = 1.297
|
||||||
|
#*# pid_kd = 127.106
|
||||||
|
#*#
|
||||||
|
#*# [probe]
|
||||||
|
#*# z_offset = 0.844
|
||||||
|
#*#
|
||||||
|
#*# [bed_mesh default]
|
||||||
|
#*# version = 1
|
||||||
|
#*# points =
|
||||||
|
#*# 0.200833, 0.037778, -0.041667
|
||||||
|
#*# 0.163611, 0.009167, -0.021667
|
||||||
|
#*# 0.178333, 0.081667, 0.089167
|
||||||
|
#*# x_count = 3
|
||||||
|
#*# y_count = 3
|
||||||
|
#*# mesh_x_pps = 3
|
||||||
|
#*# mesh_y_pps = 3
|
||||||
|
#*# algo = bicubic
|
||||||
|
#*# tension = 0.2
|
||||||
|
#*# min_x = 24.0
|
||||||
|
#*# max_x = 228.0
|
||||||
|
#*# min_y = 6.0
|
||||||
|
#*# max_y = 210.0
|
||||||
@@ -194,14 +194,14 @@ gcode:
|
|||||||
#*# pid_kd = 127.106
|
#*# pid_kd = 127.106
|
||||||
#*#
|
#*#
|
||||||
#*# [probe]
|
#*# [probe]
|
||||||
#*# z_offset = 1.344
|
#*# z_offset = 0.934
|
||||||
#*#
|
#*#
|
||||||
#*# [bed_mesh default]
|
#*# [bed_mesh default]
|
||||||
#*# version = 1
|
#*# version = 1
|
||||||
#*# points =
|
#*# points =
|
||||||
#*# 0.664167, 0.159444, -0.203750
|
#*# 0.200833, 0.037778, -0.041667
|
||||||
#*# 0.640833, 0.175000, -0.247500
|
#*# 0.163611, 0.009167, -0.021667
|
||||||
#*# 0.631667, 0.240000, -0.174167
|
#*# 0.178333, 0.081667, 0.089167
|
||||||
#*# x_count = 3
|
#*# x_count = 3
|
||||||
#*# y_count = 3
|
#*# y_count = 3
|
||||||
#*# mesh_x_pps = 3
|
#*# mesh_x_pps = 3
|
||||||
|
|||||||
Reference in New Issue
Block a user