diff --git a/printer-20250925_190144.cfg b/printer-20250925_190144.cfg
new file mode 100644
index 0000000..830eef3
--- /dev/null
+++ b/printer-20250925_190144.cfg
@@ -0,0 +1,214 @@
+# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
+# Prusa MK3s Klipper Config
+
+# The first thing you'll need to do is go through this file and comment out / uncomment
+# the files and/or settings you need.
+
+# You'll be able to print just fine with this config as it is, but it is recommended
+# that you follow these steps to properly calibrate your printer:
+
+# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
+# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
+# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
+# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
+
+# Read more about klipper here: https://www.klipper3d.org/Overview.html
+
+### UI
+# [include mainsail.cfg]
+[include fluidd.cfg]
+
+[mcu]
+# serial: /dev/serial0 # If you are using internal RPI serial port
+serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
+restart_method: command
+
+### CONTROL BOARD
+[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
+
+### BASE SETUP
+[include klipper-prusa-mk3s/mk3s/display.cfg]
+[include klipper-prusa-mk3s/mk3s/steppers.cfg]
+[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
+
+### EXTRUSION
+
+# Extruder
+[include klipper-prusa-mk3s/extruders/prusa.cfg]
+# [include klipper-prusa-mk3s/extruders/bmg.cfg]
+
+# Hotend
+[include klipper-prusa-mk3s/hotends/v6.cfg]
+# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
+# [include klipper-prusa-mk3s/hotends/rapido.cfg]
+
+[extruder]
+# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
+# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
+# pressure_advance: 0.05
+nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
+#pid_Kp: 23.862
+#pid_Ki: 1.020
+#pid_Kd: 139.595
+max_extrude_only_distance: 101
+
+## copy this from your current setting on Prusa, but make it absolute (removing -)
+[probe]
+#z_offset = 0.685
+
+## For faster printing enable
+# [printer]
+# max_accel: 2000
+# max_accel_to_decel: 2000
+# max_z_velocity: 20
+# max_z_accel: 300
+
+## For stealth mode enable
+
+# [tmc2130 stepper_x]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_y]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_z]
+# interpolate: True
+# stealthchop_threshold: 80
+
+## Custom bed mest probes
+## Prusa has 3x3 or 7x7, you can do any variation you want
+# [bed_mesh]
+# probe_count: 4,4
+
+# Linear correction
+# Check `extruders/linear-correction` for more informations.
+[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
+
+### MACROS
+[include klipper-prusa-mk3s/macros.cfg]
+
+# FIRST RUN: 
+# Execute these sequentially in the console, let PID tuning finish before saving
+# PID_CALIBRATE HEATER=extruder TARGET=170
+# SAVE_CONFIG
+# PID_CALIBRATE HEATER=heater_bed TARGET=60
+# SAVE_CONFIG
+
+# You can also skip the above setting for stock Prusa and use
+[extruder]
+#control: pid
+min_temp: 0
+max_temp: 305
+min_extrude_temp: 170
+rotation_distance=22.399821
+
+[stepper_z]
+position_max: 210
+
+[heater_bed]
+pid_Kp=54.241
+pid_Ki=0.646
+pid_Kd=1139.053
+
+#####################################################################
+#   print_start macro
+#####################################################################
+
+## *** THINGS TO UNCOMMENT: ***
+## Bed mesh (2 lines at 2 locations)
+## Z_TILT_ADJUST if your printer is a Trident
+## Quad gantry level if your printer is a V2
+## Nevermore - if you have one
+
+[gcode_macro PRINT_START]
+gcode:
+  # This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
+  {% set target_bed = params.BED|int %}
+  {% set target_extruder = params.EXTRUDER|int %}
+  {% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
+  {% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
+
+  # Homes the printer, sets absolute positioning
+  G28                   # Full home (XYZ)
+  G90                   # Absolut position
+
+  ##  Uncomment for bed mesh (1 of 2)
+  BED_MESH_CLEAR       # Clears old saved bed mesh (if any)
+
+  SET_DISPLAY_TEXT MSG="Bed: {target_bed}c"           # Displays info
+  M140 S{target_bed}                                  # Sets bed target
+
+  ##  Uncomment for bed mesh (2 of 2)
+  SET_DISPLAY_TEXT MSG="Bed mesh"    # Displays info
+  bed_mesh_calibrate                 # Starts bed mesh
+
+  # Heats up the nozzle and bed to target via data from slicer
+  SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c"             # Displays info
+  M104 S{target_extruder}                                       # Sets extruder target
+  G1 X{x_wait} Y{y_wait} Z15 F9000                              # Goes to center of the bed
+  M107                                                          # Turns off partcooling fan
+  M190 S{target_bed}                                            # Heats bed to printing temp (if not already hot enough)
+  M109 S{target_extruder}                                       # Heats the nozzle to printing temp (if not already hot enough)
+
+  # Gets ready to print by doing a purge line
+  SET_DISPLAY_TEXT MSG="Printer goes brr"          # Displays info
+  G0 X0 Y0 F9000                                   # Moves to starting point
+  G1 Z0.2 F720
+  G1 Y-3 F1000                                     # Go outside print area
+  G1 X60 E9 F1000                                  # intro line
+  G1 X100 E12.5 F1000                              # intro line
+  G92 E0
+  G90                                              # Absolute position
+
+[gcode_macro PRINT_END]
+gcode:
+  # Turn off bed, extruder, and fan
+  M140 S0
+  M104 S0
+  M107
+  # Move nozzle away from print while retracting
+  G91
+  G1 X-2 Y-2 E-3 F300
+  # Raise nozzle by 10mm
+  G1 Z10 F1000
+  G90
+  # Move to origin
+  G0 X0 Y0 F9000
+  # Disable steppers
+  M84
+  # Display info
+  SET_DISPLAY_TEXT MSG="Print done"
+
+[exclude_object]
+
+
+### The end, on the end the printer will store it's tuning data, so do not edit it.
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 25.678
+#*# pid_ki = 1.297
+#*# pid_kd = 127.106
+#*#
+#*# [probe]
+#*# z_offset = 1.344
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	  0.664167, 0.159444, -0.203750
+#*# 	  0.640833, 0.175000, -0.247500
+#*# 	  0.631667, 0.240000, -0.174167
+#*# x_count = 3
+#*# y_count = 3
+#*# mesh_x_pps = 3
+#*# mesh_y_pps = 3
+#*# algo = bicubic
+#*# tension = 0.2
+#*# min_x = 24.0
+#*# max_x = 228.0
+#*# min_y = 6.0
+#*# max_y = 210.0
diff --git a/printer-20250925_190622.cfg b/printer-20250925_190622.cfg
new file mode 100644
index 0000000..b3648f1
--- /dev/null
+++ b/printer-20250925_190622.cfg
@@ -0,0 +1,214 @@
+# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
+# Prusa MK3s Klipper Config
+
+# The first thing you'll need to do is go through this file and comment out / uncomment
+# the files and/or settings you need.
+
+# You'll be able to print just fine with this config as it is, but it is recommended
+# that you follow these steps to properly calibrate your printer:
+
+# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
+# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
+# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
+# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
+
+# Read more about klipper here: https://www.klipper3d.org/Overview.html
+
+### UI
+# [include mainsail.cfg]
+[include fluidd.cfg]
+
+[mcu]
+# serial: /dev/serial0 # If you are using internal RPI serial port
+serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
+restart_method: command
+
+### CONTROL BOARD
+[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
+
+### BASE SETUP
+[include klipper-prusa-mk3s/mk3s/display.cfg]
+[include klipper-prusa-mk3s/mk3s/steppers.cfg]
+[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
+
+### EXTRUSION
+
+# Extruder
+[include klipper-prusa-mk3s/extruders/prusa.cfg]
+# [include klipper-prusa-mk3s/extruders/bmg.cfg]
+
+# Hotend
+[include klipper-prusa-mk3s/hotends/v6.cfg]
+# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
+# [include klipper-prusa-mk3s/hotends/rapido.cfg]
+
+[extruder]
+# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
+# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
+# pressure_advance: 0.05
+nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
+#pid_Kp: 23.862
+#pid_Ki: 1.020
+#pid_Kd: 139.595
+max_extrude_only_distance: 101
+
+## copy this from your current setting on Prusa, but make it absolute (removing -)
+[probe]
+#z_offset = 0.685
+
+## For faster printing enable
+# [printer]
+# max_accel: 2000
+# max_accel_to_decel: 2000
+# max_z_velocity: 20
+# max_z_accel: 300
+
+## For stealth mode enable
+
+# [tmc2130 stepper_x]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_y]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_z]
+# interpolate: True
+# stealthchop_threshold: 80
+
+## Custom bed mest probes
+## Prusa has 3x3 or 7x7, you can do any variation you want
+# [bed_mesh]
+# probe_count: 4,4
+
+# Linear correction
+# Check `extruders/linear-correction` for more informations.
+[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
+
+### MACROS
+[include klipper-prusa-mk3s/macros.cfg]
+
+# FIRST RUN: 
+# Execute these sequentially in the console, let PID tuning finish before saving
+# PID_CALIBRATE HEATER=extruder TARGET=170
+# SAVE_CONFIG
+# PID_CALIBRATE HEATER=heater_bed TARGET=60
+# SAVE_CONFIG
+
+# You can also skip the above setting for stock Prusa and use
+[extruder]
+#control: pid
+min_temp: 0
+max_temp: 305
+min_extrude_temp: 170
+rotation_distance=22.399821
+
+[stepper_z]
+position_max: 210
+
+[heater_bed]
+pid_Kp=54.241
+pid_Ki=0.646
+pid_Kd=1139.053
+
+#####################################################################
+#   print_start macro
+#####################################################################
+
+## *** THINGS TO UNCOMMENT: ***
+## Bed mesh (2 lines at 2 locations)
+## Z_TILT_ADJUST if your printer is a Trident
+## Quad gantry level if your printer is a V2
+## Nevermore - if you have one
+
+[gcode_macro PRINT_START]
+gcode:
+  # This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
+  {% set target_bed = params.BED|int %}
+  {% set target_extruder = params.EXTRUDER|int %}
+  {% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
+  {% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
+
+  # Homes the printer, sets absolute positioning
+  G28                   # Full home (XYZ)
+  G90                   # Absolut position
+
+  ##  Uncomment for bed mesh (1 of 2)
+  BED_MESH_CLEAR       # Clears old saved bed mesh (if any)
+
+  SET_DISPLAY_TEXT MSG="Bed: {target_bed}c"           # Displays info
+  M140 S{target_bed}                                  # Sets bed target
+
+  ##  Uncomment for bed mesh (2 of 2)
+  SET_DISPLAY_TEXT MSG="Bed mesh"    # Displays info
+  bed_mesh_calibrate                 # Starts bed mesh
+
+  # Heats up the nozzle and bed to target via data from slicer
+  SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c"             # Displays info
+  M104 S{target_extruder}                                       # Sets extruder target
+  G1 X{x_wait} Y{y_wait} Z15 F9000                              # Goes to center of the bed
+  M107                                                          # Turns off partcooling fan
+  M190 S{target_bed}                                            # Heats bed to printing temp (if not already hot enough)
+  M109 S{target_extruder}                                       # Heats the nozzle to printing temp (if not already hot enough)
+
+  # Gets ready to print by doing a purge line
+  SET_DISPLAY_TEXT MSG="Printer goes brr"          # Displays info
+  G0 X0 Y0 F9000                                   # Moves to starting point
+  G1 Z0.2 F720
+  G1 Y-3 F1000                                     # Go outside print area
+  G1 X60 E9 F1000                                  # intro line
+  G1 X100 E12.5 F1000                              # intro line
+  G92 E0
+  G90                                              # Absolute position
+
+[gcode_macro PRINT_END]
+gcode:
+  # Turn off bed, extruder, and fan
+  M140 S0
+  M104 S0
+  M107
+  # Move nozzle away from print while retracting
+  G91
+  G1 X-2 Y-2 E-3 F300
+  # Raise nozzle by 10mm
+  G1 Z10 F1000
+  G90
+  # Move to origin
+  G0 X0 Y0 F9000
+  # Disable steppers
+  M84
+  # Display info
+  SET_DISPLAY_TEXT MSG="Print done"
+
+[exclude_object]
+
+
+### The end, on the end the printer will store it's tuning data, so do not edit it.
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 25.678
+#*# pid_ki = 1.297
+#*# pid_kd = 127.106
+#*#
+#*# [probe]
+#*# z_offset = 0.844
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	0.664167, 0.159444, -0.203750
+#*# 	0.640833, 0.175000, -0.247500
+#*# 	0.631667, 0.240000, -0.174167
+#*# x_count = 3
+#*# y_count = 3
+#*# mesh_x_pps = 3
+#*# mesh_y_pps = 3
+#*# algo = bicubic
+#*# tension = 0.2
+#*# min_x = 24.0
+#*# max_x = 228.0
+#*# min_y = 6.0
+#*# max_y = 210.0
diff --git a/printer-20250925_191018.cfg b/printer-20250925_191018.cfg
new file mode 100644
index 0000000..f2a9585
--- /dev/null
+++ b/printer-20250925_191018.cfg
@@ -0,0 +1,214 @@
+# DO NOT EDIT THIS FILE, IT IS A TEMPLATE. THAT YOU NEED TO COPY
+# Prusa MK3s Klipper Config
+
+# The first thing you'll need to do is go through this file and comment out / uncomment
+# the files and/or settings you need.
+
+# You'll be able to print just fine with this config as it is, but it is recommended
+# that you follow these steps to properly calibrate your printer:
+
+# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
+# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
+# 2) Skew Correction: https://www.klipper3d.org/skew_correction.html
+# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
+
+# Read more about klipper here: https://www.klipper3d.org/Overview.html
+
+### UI
+# [include mainsail.cfg]
+[include fluidd.cfg]
+
+[mcu]
+# serial: /dev/serial0 # If you are using internal RPI serial port
+serial: /dev/ttyACM0 # If you are using RPI via USB connection to printer
+restart_method: command
+
+### CONTROL BOARD
+[include klipper-prusa-mk3s/mk3s/einsy-rambo.cfg]
+
+### BASE SETUP
+[include klipper-prusa-mk3s/mk3s/display.cfg]
+[include klipper-prusa-mk3s/mk3s/steppers.cfg]
+[include klipper-prusa-mk3s/mk3s/tmc2130.cfg]
+
+### EXTRUSION
+
+# Extruder
+[include klipper-prusa-mk3s/extruders/prusa.cfg]
+# [include klipper-prusa-mk3s/extruders/bmg.cfg]
+
+# Hotend
+[include klipper-prusa-mk3s/hotends/v6.cfg]
+# [include klipper-prusa-mk3s/hotends/dragon-standard-flow.cfg]
+# [include klipper-prusa-mk3s/hotends/rapido.cfg]
+
+[extruder]
+# To tune Pressure Advance see https://www.klipper3d.org/Pressure_Advance.html
+# default is already set based on hotend, but you can further improve prints by calibrating it to your nozzle and material
+# pressure_advance: 0.05
+nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
+#pid_Kp: 23.862
+#pid_Ki: 1.020
+#pid_Kd: 139.595
+max_extrude_only_distance: 101
+
+## copy this from your current setting on Prusa, but make it absolute (removing -)
+[probe]
+#z_offset = 0.685
+
+## For faster printing enable
+# [printer]
+# max_accel: 2000
+# max_accel_to_decel: 2000
+# max_z_velocity: 20
+# max_z_accel: 300
+
+## For stealth mode enable
+
+# [tmc2130 stepper_x]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_y]
+# interpolate: True
+# stealthchop_threshold: 80
+# [tmc2130 stepper_z]
+# interpolate: True
+# stealthchop_threshold: 80
+
+## Custom bed mest probes
+## Prusa has 3x3 or 7x7, you can do any variation you want
+# [bed_mesh]
+# probe_count: 4,4
+
+# Linear correction
+# Check `extruders/linear-correction` for more informations.
+[include klipper-prusa-mk3s/extruders/linear-correction/linear-correction-0.cfg] # Default Prusa linear correction optimized for LDO motors
+
+### MACROS
+[include klipper-prusa-mk3s/macros.cfg]
+
+# FIRST RUN: 
+# Execute these sequentially in the console, let PID tuning finish before saving
+# PID_CALIBRATE HEATER=extruder TARGET=170
+# SAVE_CONFIG
+# PID_CALIBRATE HEATER=heater_bed TARGET=60
+# SAVE_CONFIG
+
+# You can also skip the above setting for stock Prusa and use
+[extruder]
+#control: pid
+min_temp: 0
+max_temp: 305
+min_extrude_temp: 170
+rotation_distance=22.399821
+
+[stepper_z]
+position_max: 210
+
+[heater_bed]
+pid_Kp=54.241
+pid_Ki=0.646
+pid_Kd=1139.053
+
+#####################################################################
+#   print_start macro
+#####################################################################
+
+## *** THINGS TO UNCOMMENT: ***
+## Bed mesh (2 lines at 2 locations)
+## Z_TILT_ADJUST if your printer is a Trident
+## Quad gantry level if your printer is a V2
+## Nevermore - if you have one
+
+[gcode_macro PRINT_START]
+gcode:
+  # This part fetches data from your slicer. Such as bed temp, extruder temp, chamber temp and size of your printer.
+  {% set target_bed = params.BED|int %}
+  {% set target_extruder = params.EXTRUDER|int %}
+  {% set x_wait = printer.toolhead.axis_maximum.x|float / 2 %}
+  {% set y_wait = printer.toolhead.axis_maximum.y|float / 2 %}
+
+  # Homes the printer, sets absolute positioning
+  G28                   # Full home (XYZ)
+  G90                   # Absolut position
+
+  ##  Uncomment for bed mesh (1 of 2)
+  BED_MESH_CLEAR       # Clears old saved bed mesh (if any)
+
+  SET_DISPLAY_TEXT MSG="Bed: {target_bed}c"           # Displays info
+  M140 S{target_bed}                                  # Sets bed target
+
+  ##  Uncomment for bed mesh (2 of 2)
+  SET_DISPLAY_TEXT MSG="Bed mesh"    # Displays info
+  bed_mesh_calibrate                 # Starts bed mesh
+
+  # Heats up the nozzle and bed to target via data from slicer
+  SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c"             # Displays info
+  M104 S{target_extruder}                                       # Sets extruder target
+  G1 X{x_wait} Y{y_wait} Z15 F9000                              # Goes to center of the bed
+  M107                                                          # Turns off partcooling fan
+  M190 S{target_bed}                                            # Heats bed to printing temp (if not already hot enough)
+  M109 S{target_extruder}                                       # Heats the nozzle to printing temp (if not already hot enough)
+
+  # Gets ready to print by doing a purge line
+  SET_DISPLAY_TEXT MSG="Printer goes brr"          # Displays info
+  G0 X0 Y0 F9000                                   # Moves to starting point
+  G1 Z0.2 F720
+  G1 Y-3 F1000                                     # Go outside print area
+  G1 X60 E9 F1000                                  # intro line
+  G1 X100 E12.5 F1000                              # intro line
+  G92 E0
+  G90                                              # Absolute position
+
+[gcode_macro PRINT_END]
+gcode:
+  # Turn off bed, extruder, and fan
+  M140 S0
+  M104 S0
+  M107
+  # Move nozzle away from print while retracting
+  G91
+  G1 X-2 Y-2 E-3 F300
+  # Raise nozzle by 10mm
+  G1 Z10 F1000
+  G90
+  # Move to origin
+  G0 X0 Y0 F9000
+  # Disable steppers
+  M84
+  # Display info
+  SET_DISPLAY_TEXT MSG="Print done"
+
+[exclude_object]
+
+
+### The end, on the end the printer will store it's tuning data, so do not edit it.
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 25.678
+#*# pid_ki = 1.297
+#*# pid_kd = 127.106
+#*#
+#*# [probe]
+#*# z_offset = 0.844
+#*#
+#*# [bed_mesh default]
+#*# version = 1
+#*# points =
+#*# 	  0.200833, 0.037778, -0.041667
+#*# 	  0.163611, 0.009167, -0.021667
+#*# 	  0.178333, 0.081667, 0.089167
+#*# x_count = 3
+#*# y_count = 3
+#*# mesh_x_pps = 3
+#*# mesh_y_pps = 3
+#*# algo = bicubic
+#*# tension = 0.2
+#*# min_x = 24.0
+#*# max_x = 228.0
+#*# min_y = 6.0
+#*# max_y = 210.0
diff --git a/printer.cfg b/printer.cfg
index 830eef3..e7b6098 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -194,14 +194,14 @@ gcode:
 #*# pid_kd = 127.106
 #*#
 #*# [probe]
-#*# z_offset = 1.344
+#*# z_offset = 0.934
 #*#
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.664167, 0.159444, -0.203750
-#*# 	  0.640833, 0.175000, -0.247500
-#*# 	  0.631667, 0.240000, -0.174167
+#*# 	0.200833, 0.037778, -0.041667
+#*# 	0.163611, 0.009167, -0.021667
+#*# 	0.178333, 0.081667, 0.089167
 #*# x_count = 3
 #*# y_count = 3
 #*# mesh_x_pps = 3