initialise repo

2025-05-08 21:22:28 +03:00
commit 76c58420f8
11 changed files with 861 additions and 0 deletions
--- a/crowsnest.conf
+++ b/crowsnest.conf
@@ -0,0 +1,48 @@
+#### crowsnest.conf
+#### This is a typical default config.
+#### Also used as default in mainsail / MainsailOS
+#### See:
+#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
+#### for details to configure to your needs.
+
+
+#####################################################################
+####                                                            #####
+####      Information about ports and according URL's           #####
+####                                                            #####
+#####################################################################
+####                                                            #####
+####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
+####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
+####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
+####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
+####                                                            #####
+####    Note: These ports are default for most Mainsail         #####
+####    installations. To use any other port would involve      #####
+####    changing the proxy configuration or using directly      #####
+####    http://<ip>:<port>/?action=[stream/snapshot]            #####
+####                                                            #####
+#####################################################################
+####    RTSP Stream URL: ( if enabled and supported )           #####
+####    rtsp://<ip>:<rtsp_port>/stream.h264                     #####
+#####################################################################
+
+
+[crowsnest]
+log_path: /home/pi/printer_data/logs/crowsnest.log
+log_level: verbose                      # Valid Options are quiet/verbose/debug
+delete_log: false                       # Deletes log on every restart, if set to true
+no_proxy: false
+
+[cam 1]
+mode: camera-streamer                         # ustreamer - Provides mjpg and snapshots. (All devices)
+                                        # camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
+enable_rtsp: false                      # If camera-streamer is used, this enables also usage of an rtsp server
+rtsp_port: 8554                         # Set different ports for each device!
+port: 8080                              # HTTP/MJPG Stream/Snapshot Port
+device: /base/soc/i2c0mux/i2c@1/imx708@1a
+#resolution: 1280x720                     # widthxheight format
+resolution: 4608x2592
+max_fps: 30                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
+#custom_flags:                          # You can run the Stream Services with custom flags.
+#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.