Adds Slicer and Test Prints data

Manuals/Slicer/Doc_250_V22_AB.ini

@@ -0,0 +1,234 @@
+# generated by PrusaSlicer 2.1.0-rc+win64 on 2020-01-08 at 05:33:09
+avoid_crossing_perimeters = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,250x0,250x250,0x250
+bed_temperature = 105
+before_layer_gcode = 
+between_objects_gcode = 
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bridge_acceleration = 3000
+bridge_angle = 0
+bridge_fan_speed = 15
+bridge_flow_ratio = 0.8
+bridge_speed = 60
+brim_width = 0
+clip_multipart_objects = 0
+colorprint_heights = 
+complete_objects = 0
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 3000
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 30
+disable_fan_first_layers = 5
+dont_support_bridges = 1
+duplicate_distance = 6
+elefant_foot_compensation = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+end_gcode = print_end    ;end script from macro
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.38
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_colour = ""
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 0.9
+extrusion_width = 0.4
+fan_always_on = 1
+fan_below_layer_time = 45
+filament_colour = #FFFF00
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 22
+filament_density = 1.05
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 11
+filament_minimal_purge_on_wipe_tower = 5
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = "KVP ABS"
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+fill_angle = 45
+fill_density = 40%
+fill_pattern = grid
+first_layer_acceleration = 2000
+first_layer_bed_temperature = 110
+first_layer_extrusion_width = 0.4
+first_layer_height = 0.24
+first_layer_speed = 25
+first_layer_temperature = 240
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_flavor = reprap
+gcode_label_objects = 0
+high_current_on_filament_swap = 0
+host_type = octoprint
+infill_acceleration = 4000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.2
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_fan_speed = 30
+max_layer_height = 0.3
+max_print_height = 180
+max_print_speed = 300
+max_volumetric_speed = 0
+min_fan_speed = 15
+min_layer_height = 0.07
+min_print_speed = 10
+min_skirt_length = 20
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = KVP [input_filename_base]-[total_weight]g-[print_time].gcode
+overhangs = 1
+parking_pos_retraction = 92
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.38
+perimeter_speed = 80
+perimeters = 4
+post_process = 
+print_host = 
+print_settings_id = KVP ABS PIF
+printer_model = 
+printer_notes = 
+printer_settings_id = 250mm3 0.4mm ABS AB
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+raft_layers = 0
+remaining_times = 0
+resolution = 0
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.75
+retract_length_toolchange = 10
+retract_lift = 0.4
+retract_lift_above = 0.3
+retract_lift_below = 150
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+seam_position = aligned
+serial_port = 
+serial_speed = 250000
+silent_mode = 1
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+slowdown_below_layer_time = 15
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 120
+spiral_vase = 0
+standby_temperature_delta = -5
+start_filament_gcode = ";Filament gcode"
+start_gcode = print_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 2
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 60
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+temperature = 235
+thin_walls = 0
+threads = 16
+toolchange_gcode = 
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.44
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 300
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 0
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+wiping_volumes_extruders = 70,70
+wiping_volumes_matrix = 0
+xy_size_compensation = 0
+z_offset = 0

Manuals/Slicer/Doc_320_V22_M31_KVP.ini

@@ -0,0 +1,234 @@
+# generated by PrusaSlicer 2.1.0-rc+win64 on 2020-01-08 at 05:31:59
+avoid_crossing_perimeters = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,320x0,320x320,0x320
+bed_temperature = 105
+before_layer_gcode = 
+between_objects_gcode = 
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bridge_acceleration = 3000
+bridge_angle = 0
+bridge_fan_speed = 15
+bridge_flow_ratio = 0.8
+bridge_speed = 60
+brim_width = 0
+clip_multipart_objects = 0
+colorprint_heights = 
+complete_objects = 0
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 3000
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 25
+disable_fan_first_layers = 5
+dont_support_bridges = 1
+duplicate_distance = 6
+elefant_foot_compensation = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+end_gcode = print_end
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.38
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_colour = ""
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 0.9
+extrusion_width = 0.4
+fan_always_on = 1
+fan_below_layer_time = 45
+filament_colour = #FFFF00
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 22
+filament_density = 1.05
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 11
+filament_minimal_purge_on_wipe_tower = 5
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = "KVP ABS"
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+fill_angle = 45
+fill_density = 40%
+fill_pattern = grid
+first_layer_acceleration = 2000
+first_layer_bed_temperature = 110
+first_layer_extrusion_width = 0.4
+first_layer_height = 0.24
+first_layer_speed = 25
+first_layer_temperature = 240
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_flavor = reprap
+gcode_label_objects = 0
+high_current_on_filament_swap = 0
+host_type = octoprint
+infill_acceleration = 4000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+interface_shells = 0
+layer_gcode = ; pause as layer code\n; {if layer_z ==3.04}M226 ; pause at height for filament swap{endif}\n; {if layer_z ==3.64}M226 ; pause at height for filament swap{endif}
+layer_height = 0.2
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_fan_speed = 30
+max_layer_height = 0.3
+max_print_height = 280
+max_print_speed = 300
+max_volumetric_speed = 0
+min_fan_speed = 15
+min_layer_height = 0.07
+min_print_speed = 10
+min_skirt_length = 20
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = KVP [input_filename_base]-[total_weight]g-[print_time].gcode
+overhangs = 1
+parking_pos_retraction = 92
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.38
+perimeter_speed = 80
+perimeters = 4
+post_process = 
+print_host = 
+print_settings_id = KVP ABS PIF
+printer_model = 
+printer_notes = 
+printer_settings_id = V320 V2.1 - 0.4mm Nozzle - ABS
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+raft_layers = 0
+remaining_times = 0
+resolution = 0
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 5.8
+retract_length_toolchange = 10
+retract_lift = 0.4
+retract_lift_above = 0.3
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+seam_position = aligned
+serial_port = 
+serial_speed = 250000
+silent_mode = 1
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 3
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+slowdown_below_layer_time = 15
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 120
+spiral_vase = 0
+standby_temperature_delta = -5
+start_filament_gcode = ";Filament gcode"
+start_gcode = print_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 2
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 60
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+temperature = 235
+thin_walls = 0
+threads = 16
+toolchange_gcode = 
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.44
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 300
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+wiping_volumes_extruders = 70,70
+wiping_volumes_matrix = 0
+xy_size_compensation = 0
+z_offset = 0

Manuals/Slicer/Readme.md

@@ -3,4 +3,11 @@
 1. You need to adjust slicer profile per material you are using
 2. If you are not using 350mm bed, adjust bed size.
 3. If you are using different nozzle, then adjust it's size.
-4. We recommend using [SuperSlicer](https://github.com/supermerill/SuperSlicer) for Voron Printers.
+4. We recommend using [SuperSlicer](https://github.com/supermerill/SuperSlicer) for Voron Printers.
+
+## Where to set the model and textures:
+![Examples](SS_Settings.png) 
+
+# Sources:
+[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)
+[Voron 2 Github](https://github.com/VoronDesign/Voron-2)

Manuals/Test_Prints/Readme.md

@@ -0,0 +1,9 @@
+## Test Prints
+These are some of the test files you can use to help dial in your printer before printing your printer parts.
+
+The parts are representative of the tolerances and fits that are crucial to an easy and smooth build of your printer. Print them in the orientation shown for best results. The thread tests should thread together smoothly with zero binding.
+
+The filament card and caddy are both test prints as well as a good way to have a sample of each color filament you own for use later in project planning.
+
+# Sources:
+[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)

Manuals/Tuning/Readme.md

@@ -29,12 +29,12 @@
       9. The nozzle bed offset is done for now.
 7.  Tighten ***all*** the screws while cabin is still hot.
 
-Thats it for tuning. You should be now ready for your first print. If you had any issues along the way, you can take a look at [very detailed tuning guide](https://github.com/AndrewEllis93/Print-Tuning-Guide) by AndrewEllis93. 
-
-Don't have an idea what to print? Try printing a [cube](https://www.thingiverse.com/thing:5429894) and filming it for [serial request](https://www.reddit.com/r/voroncorexy/). Please read about the process in [this serial request information questions reddit thread](https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/).
+Thats it for tuning. You should be now ready for your first print. If you had any issues along the way, you can take a look at [very detailed tuning guide](https://github.com/AndrewEllis93/Print-Tuning-Guide) by AndrewEllis93. You can also find some helpful tuning print files [here](../Test_Prints/).
 
 > **PS:** For configuring MainsailOS from SSH, enter **SUDO raspi-config**. From there you can join your device to WiFi should you choose to do so and change local network domain name.
 
+Don't have an idea what to print? Try printing a [cube](https://www.thingiverse.com/thing:5429894) and filming it for [serial request](https://www.reddit.com/r/voroncorexy/). Please read about the process in [this serial request information questions reddit thread](https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/).
+
 ---
 ### Back: [Manuals](../Readme.md)