Rotate tubes and other fixes

74141.lib

@@ -5,7 +5,7 @@ EESchema-LIBRARY Version 2.3
 #
 DEF 74141-DIP U 0 40 Y Y 2 L N
 F0 "U" 0 750 50 H V C CNN
-F1 "74141-DIP" 0 650 50 H V C CNN
+F1 "Housings_DIP:DIP-16_W7.62mm" 0 650 50 H V C CNN
 F2 "dip-sip:DIP-16" 0 0 50 H I C CNN
 F3 "" 200 450 60 H V C CNN
 $FPLIST
@@ -14,21 +14,21 @@ $ENDFPLIST
 DRAW
 T 0 0 550 50 0 1 0 BCD/DEC Normal 0 C C
 S -200 600 200 -550 1 1 10 f
-X 9 2 450 -350 250 L 50 50 1 1 C V
+X 9 10 450 -350 250 L 50 50 1 1 C V
-X 0 1 450 -450 250 L 50 50 1 1 C V
+X 0 9 450 -450 250 L 50 50 1 1 C V
 X A 3 -350 150 150 R 50 50 1 1 I
 X D 4 -350 250 150 R 50 50 1 1 I
 X VCC 5 0 400 150 D 50 50 1 1 W N
 X B 6 -350 350 150 R 50 50 1 1 I
 X C 7 -350 450 150 R 50 50 1 1 I
-X 3 10 450 250 250 L 50 50 1 1 C V
+X 3 15 450 250 250 L 50 50 1 1 C V
-X 4 11 450 150 250 L 50 50 1 1 C V
+X 4 1 450 150 250 L 50 50 1 1 C V
-X 8 16 450 -250 250 L 50 50 1 1 C V
+X 8 8 450 -250 250 L 50 50 1 1 C V
-X 7 15 450 -150 250 L 50 50 1 1 C V
+X 7 11 450 -150 250 L 50 50 1 1 C V
-X 5 13 450 50 250 L 50 50 1 1 C V
+X 5 16 450 50 250 L 50 50 1 1 C V
-X 6 14 450 -50 250 L 50 50 1 1 C V
+X 6 13 450 -50 250 L 50 50 1 1 C V
-X 2 9 450 350 250 L 50 50 1 1 C V
+X 2 2 450 350 250 L 50 50 1 1 C V
-X 1 8 450 450 250 L 50 50 1 1 C V
+X 1 14 450 450 250 L 50 50 1 1 C V
 S -100 250 100 -250 2 1 10 f
 X GND 12 0 -400 150 U 50 50 1 1 W N
 ENDDRAW

Makefile

@@ -0,0 +1,45 @@
+# This makefile:
+# * Converts KiCad exported Gerber files to G-code files usable with LinuxCNC
+# * Merges drill toolpaths to one 1mm drill toolpath
+# * Reset coordinate system
+# * Use resulting bla_front.ngc, bla_drill.ngc, bla_back.ngc files
+
+PROJECT=nixiesp
+MILL_FEED=500
+DRILL_FEED=500
+SPINDLE_SPEED=6000
+FINISH_HEIGHT=40
+DRILL_DEPTH=5
+
+# Tiling
+TILING_X=1
+TILING_Y=1
+
+all: ${PROJECT}_drill.ngc
+
+%_drill.ngc: %.drl %-F.Cu.gtl %-B.Cu.gbl
+	pcb2gcode \
+		--zero-start \
+		--onedrill \
+		--software linuxcnc \
+		--tile-x ${TILING_X} \
+		--tile-y ${TILING_Y} \
+		--front $*-F.Cu.gtl \
+		--back $*-B.Cu.gbl \
+		--drill $*.drl \
+		--outline $*-Edge.Cuts.gm1 \
+		--front-output $*_front.ngc \
+		--back-output $*_back.ngc \
+		--drill-output $*_drill.ngc \
+		--metric \
+		--metricoutput \
+		--zsafe 3 --zchange ${FINISH_HEIGHT} --zcut 0 \
+		--cutter-diameter 5 --cut-feed ${MILL_FEED} --cut-speed ${SPINDLE_SPEED} --cut-infeed ${MILL_FEED} \
+		--zwork 0 --offset 0.2 --mill-feed ${MILL_FEED} --mill-speed ${SPINDLE_SPEED} \
+		--zdrill -${DRILL_DEPTH} --drill-feed ${DRILL_FEED} --drill-speed ${SPINDLE_SPEED}
+
+clean:
+	rm -fv *.ngc
+
+purge: clean
+	rm -fv *.g* *.drl *.dsn *.ses *.bak *.kicad_pcb-bak *.png *.svg *.net

nixiesp-cache.lib

@@ -1,39 +1,6 @@
 EESchema-LIBRARY Version 2.3
 #encoding utf-8
 #
-# 74141-DIP
-#
-DEF 74141-DIP U 0 40 Y Y 2 L N
-F0 "U" 0 750 50 H V C CNN
-F1 "74141-DIP" 0 650 50 H V C CNN
-F2 "dip-sip:DIP-16" 0 0 50 H I C CNN
-F3 "" 200 450 60 H V C CNN
-$FPLIST
- DIP-16
-$ENDFPLIST
-DRAW
-T 0 0 550 50 0 1 0 BCD/DEC Normal 0 C C
-S -200 600 200 -550 1 1 10 f
-X 0 1 450 -450 250 L 50 50 1 1 C V
-X 9 2 450 -350 250 L 50 50 1 1 C V
-X A 3 -350 150 150 R 50 50 1 1 I
-X D 4 -350 250 150 R 50 50 1 1 I
-X VCC 5 0 400 150 D 50 50 1 1 W N
-X B 6 -350 350 150 R 50 50 1 1 I
-X C 7 -350 450 150 R 50 50 1 1 I
-X 1 8 450 450 250 L 50 50 1 1 C V
-X 2 9 450 350 250 L 50 50 1 1 C V
-X 3 10 450 250 250 L 50 50 1 1 C V
-X 4 11 450 150 250 L 50 50 1 1 C V
-X GND 12 0 -400 150 U 50 50 1 1 W N
-X 5 13 450 50 250 L 50 50 1 1 C V
-X 6 14 450 -50 250 L 50 50 1 1 C V
-X 7 15 450 -150 250 L 50 50 1 1 C V
-X 8 16 450 -250 250 L 50 50 1 1 C V
-S -100 250 100 -250 2 1 10 f
-ENDDRAW
-ENDDEF
-#
 # 74HC595
 #
 DEF 74HC595 U 0 40 Y Y 1 F N

nixiesp.rules

@@ -0,0 +1,91 @@
+
+(rules PCB nixiesp
+  (snap_angle 
+    fortyfive_degree
+  )
+  (autoroute_settings
+    (fanout off)
+    (autoroute on)
+    (postroute on)
+    (vias on)
+    (via_costs 50)
+    (plane_via_costs 5)
+    (start_ripup_costs 100)
+    (start_pass_no 391)
+    (layer_rule F.Cu
+      (active on)
+      (preferred_direction horizontal)
+      (preferred_direction_trace_costs 1.0)
+      (against_preferred_direction_trace_costs 3.9)
+    )
+    (layer_rule B.Cu
+      (active on)
+      (preferred_direction vertical)
+      (preferred_direction_trace_costs 1.0)
+      (against_preferred_direction_trace_costs 1.4)
+    )
+  )
+  (rule
+    (width 500.0)
+    (clear 200.2)
+    (clear 250.0 (type smd_to_turn_gap))
+    (clear 50.0 (type smd_smd))
+  )
+  (padstack "Via[0-1]_600:400_um"
+    (shape
+      (circle F.Cu 600.0 0.0 0.0)
+    )
+    (shape
+      (circle B.Cu 600.0 0.0 0.0)
+    )
+    (attach off)
+  )
+  (via 
+    "Via[0-1]_600:400_um" "Via[0-1]_600:400_um" default
+  )
+  (via 
+    "Via[0-1]_600:400_um-kicad_default" "Via[0-1]_600:400_um" "kicad_default"
+  )
+  (via_rule
+    default "Via[0-1]_600:400_um"
+  )
+  (via_rule
+    "kicad_default" "Via[0-1]_600:400_um-kicad_default"
+  )
+  (class default
+    (clearance_class default)
+    (via_rule default)
+    (rule
+      (width 500.0)
+    )
+    (circuit 
+      (use_layer F.Cu B.Cu)
+    )
+  )
+  (class "kicad_default"
+    GND "Net-(U1-Pad1)" "Net-(U1-Pad3)" "Net-(U1-Pad5)" "Net-(U1-Pad7)" VCC "Net-(U4-Pad3)" "Net-(U4-Pad6)"
+    "Net-(U4-Pad7)" "Net-(U5-Pad4)" "Net-(U5-Pad5)" "Net-(U5-Pad7)" "Net-(N1-Pad0)" "Net-(N1-Pad1)" "Net-(N1-Pad3)" "Net-(N1-Pad4)"
+    "Net-(N1-Pad5)" "Net-(N1-Pad6)" "Net-(N1-Pad7)" "Net-(N2-Pad0)" "Net-(N2-Pad1)" "Net-(N2-Pad3)" "Net-(N3-Pad0)" "Net-(N3-Pad1)"
+    "Net-(N3-Pad3)" "Net-(N3-Pad4)" "Net-(N3-Pad5)" "Net-(N3-Pad6)" "Net-(N3-Pad7)" "Net-(N4-Pad0)" "Net-(N4-Pad1)" "Net-(N4-Pad3)"
+    "Net-(N4-Pad4)" "Net-(N4-Pad5)" "Net-(N4-Pad6)" "Net-(N4-Pad7)" "Net-(N5-Pad0)" "Net-(N5-Pad1)" "Net-(N5-Pad3)" "Net-(N5-Pad4)"
+    "Net-(N5-Pad5)" "Net-(N5-Pad6)" "Net-(N5-Pad7)" "Net-(N6-Pad0)" "Net-(N6-Pad1)" "Net-(N6-Pad4)" "Net-(N6-Pad5)" "Net-(N6-Pad6)"
+    "Net-(N6-Pad7)" "Net-(N1-Pad2)" "Net-(N2-Pad2)" "Net-(N3-Pad2)" "Net-(N4-Pad2)" "Net-(N5-Pad2)" "Net-(U1-Pad14)" "Net-(U5-Pad14)"
+    "Net-(Q1-Pad2)" "Net-(Q1-Pad1)" "Net-(Q2-Pad2)" "Net-(Q2-Pad1)" "Net-(Q3-Pad2)" "Net-(Q3-Pad1)" "Net-(Q4-Pad2)" "Net-(Q4-Pad1)"
+    "Net-(D1-Pad2)" "Net-(N1-Pad8)" "Net-(N1-Pad9)" "Net-(N1-PadA)" "Net-(N2-PadA)" "Net-(N3-Pad8)" "Net-(N3-Pad9)" "Net-(N3-PadA)"
+    "Net-(N4-PadA)" "Net-(N5-Pad8)" "Net-(N5-Pad9)" "Net-(N5-PadA)" "Net-(N6-PadA)" "Net-(U2-Pad3)" "Net-(U2-Pad6)" "Net-(U2-Pad7)"
+    "Net-(U3-Pad3)" "Net-(U3-Pad6)" "Net-(U3-Pad7)" "Net-(J4-Pad1)" "Net-(N7-PadK)" "Net-(N8-PadK)" "Net-(N9-PadK)" "Net-(N10-PadK)"
+    "Net-(U1-Pad2)" "Net-(U1-Pad15)" "Net-(U2-Pad4)" "Net-(U4-Pad4)" "Net-(D2-Pad2)" "Net-(D3-Pad2)" "Net-(D4-Pad2)" "Net-(D9-Pad2)"
+    "Net-(D10-Pad2)" "Net-(J1-Pad1)" "Net-(J2-Pad3)" "Net-(J2-Pad5)" "Net-(J2-Pad7)" "Net-(N6-Pad8)" "Net-(N6-Pad9)" "Net-(J2-Pad2)"
+    "Net-(J2-Pad6)" "Net-(N2-Pad4)" "Net-(N2-Pad5)" "Net-(N2-Pad6)" "Net-(N2-Pad7)" "Net-(N2-Pad8)" "Net-(N2-Pad9)" "Net-(N4-Pad8)"
+    "Net-(N4-Pad9)" "Net-(N6-Pad2)" "Net-(N6-Pad3)" "Net-(U1-Pad9)" "Net-(U3-Pad8)" "Net-(U6-Pad8)" "Net-(U9-Pad11)" "Net-(U9-Pad13)"
+    "Net-(U9-Pad8)" "Net-(U9-Pad16)" "Net-(U9-Pad1)" "Net-(U3-Pad10)" "Net-(U6-Pad10)" "Net-(U9-Pad10)"
+    (clearance_class "kicad_default")
+    (via_rule kicad_default)
+    (rule
+      (width 500.0)
+    )
+    (circuit 
+      (use_layer F.Cu B.Cu)
+    )
+  )
+)

nixiesp.sch

@@ -358,12 +358,12 @@ NoConn ~ 10800 1150
 $Comp
 L LM1117-3.3 U10
 U 1 1 592AA286
-P 1500 4750
+P 1500 4900
-F 0 "U10" H 1600 4500 50  0000 C CNN
+F 0 "U10" H 1600 4650 50  0000 C CNN
-F 1 "LM1117-3.3" H 1500 5000 50  0000 C CNN
+F 1 "LM1117-3.3" H 1500 5150 50  0000 C CNN
-F 2 "TO_SOT_Packages_SMD:SOT-223" H 1500 4750 50  0001 C CNN
+F 2 "TO_SOT_Packages_SMD:SOT-223" H 1500 4900 50  0001 C CNN
-F 3 "" H 1500 4750 50  0001 C CNN
+F 3 "" H 1500 4900 50  0001 C CNN
-	1    1500 4750
+	1    1500 4900
 	0    -1   1    0   
 $EndComp
 $Comp
@@ -685,6 +685,105 @@ F 3 "" H 2400 3350 60  0000 C CNN
 	1    2200 2900
 	0    -1   -1   0   
 $EndComp
+$Comp
+L IN-6 N7
+U 1 1 592BEC1C
+P 7650 3950
+F 0 "N7" H 7500 4175 50  0000 L BNN
+F 1 "IN-6" H 7650 3950 50  0000 L BNN
+F 2 "nixiesp:russian-nixies-IN-6" H 7650 4100 50  0001 C CNN
+F 3 "" H 7650 3950 60  0001 C CNN
+	1    7650 3950
+	0    1    1    0   
+$EndComp
+$Comp
+L IN-6 N10
+U 1 1 592BF0B0
+P 7200 3950
+F 0 "N10" H 7050 4175 50  0000 L BNN
+F 1 "IN-6" H 7200 3950 50  0000 L BNN
+F 2 "nixiesp:russian-nixies-IN-6" H 7200 4100 50  0001 C CNN
+F 3 "" H 7200 3950 60  0001 C CNN
+	1    7200 3950
+	0    1    1    0   
+$EndComp
+$Comp
+L IN-6 N9
+U 1 1 592BF164
+P 1350 2750
+F 0 "N9" H 1200 2975 50  0000 L BNN
+F 1 "IN-6" H 1350 2750 50  0000 L BNN
+F 2 "nixiesp:russian-nixies-IN-6" H 1350 2900 50  0001 C CNN
+F 3 "" H 1350 2750 60  0001 C CNN
+	1    1350 2750
+	0    1    1    0   
+$EndComp
+$Comp
+L IN-6 N8
+U 1 1 592BF578
+P 1150 3000
+F 0 "N8" H 1000 3225 50  0000 L BNN
+F 1 "IN-6" H 1150 3000 50  0000 L BNN
+F 2 "nixiesp:russian-nixies-IN-6" H 1150 3150 50  0001 C CNN
+F 3 "" H 1150 3000 60  0001 C CNN
+	1    1150 3000
+	0    1    1    0   
+$EndComp
+$Comp
+L GND #PWR015
+U 1 1 592D5ABD
+P 6150 3250
+F 0 "#PWR015" H 6150 3000 50  0001 C CNN
+F 1 "GND" H 6150 3100 50  0000 C CNN
+F 2 "" H 6150 3250 50  0001 C CNN
+F 3 "" H 6150 3250 50  0001 C CNN
+	1    6150 3250
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR016
+U 1 1 592D5FB7
+P 3350 3250
+F 0 "#PWR016" H 3350 3000 50  0001 C CNN
+F 1 "GND" H 3350 3100 50  0000 C CNN
+F 2 "" H 3350 3250 50  0001 C CNN
+F 3 "" H 3350 3250 50  0001 C CNN
+	1    3350 3250
+	1    0    0    -1  
+$EndComp
+$Comp
+L 74141-DIP U3
+U 1 1 592BC8A1
+P 3600 2900
+F 0 "U3" H 3600 3650 50  0000 C CNN
+F 1 "K155ID1" H 3600 3550 50  0000 C CNN
+F 2 "Housings_DIP:DIP-16_W7.62mm" H 3600 2900 50  0001 C CNN
+F 3 "" H 3800 3350 60  0000 C CNN
+	1    3600 2900
+	0    -1   -1   0   
+$EndComp
+$Comp
+L 74141-DIP U9
+U 1 1 592F06C2
+P 9200 2900
+F 0 "U9" H 9200 3650 50  0000 C CNN
+F 1 "K155ID1" H 9200 3550 50  0000 C CNN
+F 2 "Housings_DIP:DIP-16_W7.62mm" H 9200 2900 50  0001 C CNN
+F 3 "" H 9400 3350 60  0000 C CNN
+	1    9200 2900
+	0    -1   -1   0   
+$EndComp
+$Comp
+L LM1117-3.3 U11
+U 1 1 59313F53
+P 1750 4750
+F 0 "U11" H 1850 4500 50  0000 C CNN
+F 1 "LM1117-3.3" H 1750 5000 50  0000 C CNN
+F 2 "TO_SOT_Packages_SMD:SOT-223" H 1750 4750 50  0001 C CNN
+F 3 "" H 1750 4750 50  0001 C CNN
+	1    1750 4750
+	0    -1   1    0   
+$EndComp
 Wire Wire Line
 	1350 2250 1350 2450
 Wire Wire Line
@@ -789,7 +888,7 @@ Wire Wire Line
 Wire Wire Line
 	8350 5100 6700 5100
 Wire Wire Line
-	1500 5050 1500 5400
+	1500 5200 1500 5400
 Connection ~ 1150 2250
 Wire Wire Line
 	1350 2250 1150 2250
@@ -800,7 +899,7 @@ Wire Wire Line
 Wire Wire Line
 	1150 4000 1150 4050
 Wire Wire Line
-	1500 5200 1850 5200
+	1750 5200 1850 5200
 Connection ~ 5750 5400
 Wire Wire Line
 	8550 5400 8550 5100
@@ -808,7 +907,6 @@ Wire Wire Line
 	5750 5400 5750 5100
 Wire Wire Line
 	2350 5300 8850 5300
-Connection ~ 1500 5200
 Connection ~ 2400 5100
 Connection ~ 2950 5400
 Wire Wire Line
@@ -904,50 +1002,6 @@ Wire Wire Line
 	8850 3700 8850 3250
 Wire Wire Line
 	9050 3700 9050 3250
-$Comp
-L IN-6 N7
-U 1 1 592BEC1C
-P 7650 3950
-F 0 "N7" H 7500 4175 50  0000 L BNN
-F 1 "IN-6" H 7650 3950 50  0000 L BNN
-F 2 "nixiesp:russian-nixies-IN-6" H 7650 4100 50  0001 C CNN
-F 3 "" H 7650 3950 60  0001 C CNN
-	1    7650 3950
-	0    1    1    0   
-$EndComp
-$Comp
-L IN-6 N10
-U 1 1 592BF0B0
-P 7200 3950
-F 0 "N10" H 7050 4175 50  0000 L BNN
-F 1 "IN-6" H 7200 3950 50  0000 L BNN
-F 2 "nixiesp:russian-nixies-IN-6" H 7200 4100 50  0001 C CNN
-F 3 "" H 7200 3950 60  0001 C CNN
-	1    7200 3950
-	0    1    1    0   
-$EndComp
-$Comp
-L IN-6 N9
-U 1 1 592BF164
-P 1350 2750
-F 0 "N9" H 1200 2975 50  0000 L BNN
-F 1 "IN-6" H 1350 2750 50  0000 L BNN
-F 2 "nixiesp:russian-nixies-IN-6" H 1350 2900 50  0001 C CNN
-F 3 "" H 1350 2750 60  0001 C CNN
-	1    1350 2750
-	0    1    1    0   
-$EndComp
-$Comp
-L IN-6 N8
-U 1 1 592BF578
-P 1150 3000
-F 0 "N8" H 1000 3225 50  0000 L BNN
-F 1 "IN-6" H 1150 3000 50  0000 L BNN
-F 2 "nixiesp:russian-nixies-IN-6" H 1150 3150 50  0001 C CNN
-F 3 "" H 1150 3000 60  0001 C CNN
-	1    1150 3000
-	0    1    1    0   
-$EndComp
 Wire Wire Line
 	8550 3700 8550 3350
 Wire Wire Line
@@ -984,28 +1038,6 @@ Wire Wire Line
 	6150 3700 6150 3600
 Wire Wire Line
 	6150 3600 1650 3600
-$Comp
-L GND #PWR015
-U 1 1 592D5ABD
-P 6150 3250
-F 0 "#PWR015" H 6150 3000 50  0001 C CNN
-F 1 "GND" H 6150 3100 50  0000 C CNN
-F 2 "" H 6150 3250 50  0001 C CNN
-F 3 "" H 6150 3250 50  0001 C CNN
-	1    6150 3250
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR016
-U 1 1 592D5FB7
-P 3350 3250
-F 0 "#PWR016" H 3350 3000 50  0001 C CNN
-F 1 "GND" H 3350 3100 50  0000 C CNN
-F 2 "" H 3350 3250 50  0001 C CNN
-F 3 "" H 3350 3250 50  0001 C CNN
-	1    3350 3250
-	1    0    0    -1  
-$EndComp
 Wire Wire Line
 	2750 3700 1750 3700
 Wire Wire Line
@@ -1024,34 +1056,24 @@ Wire Wire Line
 	1950 3350 2950 3350
 Wire Wire Line
 	2950 3350 2950 3700
-Wire Wire Line
-	1800 4750 2400 4750
 Wire Wire Line
 	2350 5200 2750 5200
 Wire Wire Line
 	2750 5200 2750 5100
 Wire Wire Line
 	2350 5400 8550 5400
-$Comp
+Wire Wire Line
-L 74141-DIP U3
+	1500 4450 1500 4600
-U 1 1 592BC8A1
+Wire Wire Line
-P 3600 2900
+	1800 4900 2400 4900
-F 0 "U3" H 3600 3650 50  0000 C CNN
+Connection ~ 2400 4900
-F 1 "K155ID1" H 3600 3550 50  0000 C CNN
+Wire Wire Line
-F 2 "Housings_DIP:DIP-16_W7.62mm" H 3600 2900 50  0001 C CNN
+	2050 4750 2400 4750
-F 3 "" H 3800 3350 60  0000 C CNN
+Wire Wire Line
-	1    3600 2900
+	1750 5050 1750 5400
-	0    -1   -1   0   
+Connection ~ 1750 5200
-$EndComp
+Wire Wire Line
-$Comp
+	1750 5300 1850 5300
-L 74141-DIP U?
+Connection ~ 1750 5400
-U 1 1 592F06C2
+Connection ~ 1750 5300
-P 9200 2900
-F 0 "U?" H 9200 3650 50  0000 C CNN
-F 1 "74141-DIP" H 9200 3550 50  0000 C CNN
-F 2 "dip-sip:DIP-16" H 9200 2900 50  0001 C CNN
-F 3 "" H 9400 3350 60  0000 C CNN
-	1    9200 2900
-	0    -1   -1   0   
-$EndComp
 $EndSCHEMATC

russian-nixies-IN-12.kicad_mod

@@ -1,11 +1,11 @@
-(module nixiesp:russian-nixies-IN-12 (layer F.Cu) (tedit 592AB8D4)
+(module nixiesp:russian-nixies-IN-12 (layer F.Cu) (tedit 59300CF0)
   (descr "MAY BE USED WITH SOCKET: SK-136")
   (tags "MAY BE USED WITH SOCKET: SK-136")
   (attr virtual)
-  (fp_text reference >NAME (at 9.99948 -0.3175 90) (layer B.SilkS)
+  (fp_text reference >NAME (at 0 -13 180) (layer B.SilkS)
     (effects (font (size 1.27 1.27) (thickness 0.0889)))
   )
-  (fp_text value Val** (at -12.1 -3.02) (layer F.SilkS)
+  (fp_text value Val** (at 9 0 90) (layer F.SilkS)
     (effects (font (thickness 0.15)))
   )
   (fp_line (start 0 -3) (end 0 3) (layer F.SilkS) (width 0.15))
@@ -28,8 +28,8 @@
   (pad A thru_hole circle (at 4 8) (size 2.54 2.54) (drill 1.09982) (layers *.Cu F.Paste F.SilkS F.Mask))
   (pad LHDP thru_hole circle (at 0 9) (size 2.54 2.54) (drill 1.09982) (layers *.Cu F.Paste F.SilkS F.Mask))
   (model ./IN-12B.wrl
-    (at (xyz -0.15 0.3 0.3))
+    (at (xyz 0.15 -0.3 0.3))
     (scale (xyz 1 1 1))
-    (rotate (xyz 0 0 180))
+    (rotate (xyz 0 0 0))
   )
 )