k-space/voron-config
11
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Activity

Automatic backup: 2025-09-03_20:00:01

Browse Source
This commit is contained in:
voron-automated
2025-09-03 20:00:01 +03:00
parent a2e4a495b4
commit a8ec2ca003
1 changed files with 60 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

74
printer.cfg
View File

@@ -419,7 +419,7 @@ fan_speed: 1.0
#####################################################################
[idle_timeout]
timeout: 1800
timeout: 600
[safe_z_home]
## XY Location of the Z Endstop Switch
@@ -575,6 +575,30 @@ gcode:
RESTORE_GCODE_STATE NAME=STATE_G32
# Faster quad gantry level
# cf. https://klipper.discourse.group/t/faster-quad-gantry-level-macro/19044
[gcode_macro QUAD_GANTRY_LEVEL]
rename_existing: _QUAD_GANTRY_LEVEL
gcode:
# If QGL is not applied, first run a coarse calibration
{% if printer.quad_gantry_level.applied == False %}
_QUAD_GANTRY_LEVEL RETRY_TOLERANCE=1.0
{% endif %}
# then perform fine QGL down to desired spec
# this has to be a separate macro call so the results of the above call will be visible!
_FINE_QUAD_GANTRY_LEVEL
[gcode_macro _FINE_QUAD_GANTRY_LEVEL]
gcode:
{% if printer.quad_gantry_level.applied == True %}
# go for full quality at reduced probing height
_QUAD_GANTRY_LEVEL HORIZONTAL_MOVE_Z=1.0 # <- set your preferred probing height here!
{% else %}
# This should never happen, just perform the full calibration using the defaults
{action_respond_info("Fine QGL called without calling course QGL first!")}
_QUAD_GANTRY_LEVEL # default behavior, no speedup
{% endif %}
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:
@@ -588,11 +612,16 @@ gcode:
## Uncomment for Beacon Contact (1 of 4 for beacon contact)
#SET_GCODE_OFFSET Z=0 # Set offset to 0
M104 S{target_extruder} # Start heating hotend
M140 S{target_bed} # Start heating bed
# Home the printer, set absolute positioning and update the Stealthburner LEDs.
STATUS_HOMING # Set LEDs to homing-mode
G28 # Full home (XYZ)
G90 # Absolute position
## Uncomment for bed mesh (1 of 2 for bed mesh)
#BED_MESH_CLEAR # Clear old saved bed mesh (if any)
@@ -620,9 +649,9 @@ gcode:
#G4 P300000 # Wait 5 min for the bedtemp to stabilize
#{% endif %}
# Heat hotend to 150c. This helps with getting a correct Z-home.
SET_DISPLAY_TEXT MSG="Hotend: 150c" # Display info on display
M109 S150 # Heat hotend to 150c
# # Heat hotend to 150c. This helps with getting a correct Z-home.
# SET_DISPLAY_TEXT MSG="Hotend: 150c" # Display info on display
# M109 S150 # Heat hotend to 150c
## Uncomment for Beacon contact (2 of 4 for beacon contact)
#G28 Z METHOD=CONTACT CALIBRATE=1 # Calibrate z offset and beacon model
@@ -633,12 +662,17 @@ gcode:
#Z_TILT_ADJUST # Level the printer via Z_TILT_ADJUST
#G28 Z # Home Z again after Z_TILT_ADJUST
STATUS_HEATING # Set LEDs to heating-mode
SET_DISPLAY_TEXT MSG="Waiting temps"
M109 S{target_extruder} # Finish heating hotend
M190 S{target_bed} # Finish heating bed
## Uncomment for V2.4 (Quad gantry level AKA QGL)
SET_DISPLAY_TEXT MSG="Bed: {target_bed}c"
M140 S{target_bed}
SET_DISPLAY_TEXT MSG="Leveling" # Display info on display
STATUS_LEVELING # Set LEDs to leveling-mode
G1 E-5 F2100 # retract filament
QUAD_GANTRY_LEVEL # Level the printer via QGL
G1 E5 F2100 # restore filament
G28 Z # Home Z again after QGL
## Uncomment for bed mesh (2 of 2 for bed mesh)
@@ -649,12 +683,12 @@ gcode:
## Uncomment for Beacon Contact (3 of 4 for beacon contact)
#G28 Z METHOD=CONTACT CALIBRATE=0 # Calibrate z offset only with hot nozzle
# Heat up the hotend up to target via data from slicer
SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Display info on display
STATUS_HEATING # Set LEDs to heating-mode
G1 X{x_wait} Y{y_wait} Z15 F9000 # Go to center of the bed
M107 # Turn off partcooling fan
M109 S{target_extruder} # Heat the hotend to set temp
# # Heat up the hotend up to target via data from slicer
# SET_DISPLAY_TEXT MSG="Hotend: {target_extruder}c" # Display info on display
# STATUS_HEATING # Set LEDs to heating-mode
# G1 X{x_wait} Y{y_wait} Z15 F9000 # Go to center of the bed
# M107 # Turn off partcooling fan
# M109 S{target_extruder} # Heat the hotend to set temp
## Uncomment for Beacon Contact (4 of 4 for beacon contact)
#SET_GCODE_OFFSET Z=0.06 # Add a little offset for hotend thermal expansion
@@ -668,6 +702,16 @@ gcode:
G1 X100 E20 F1000 # Primeline
G90 # Absolute position
# cf. https://ellis3dp.com/Print-Tuning-Guide/articles/useful_macros/pause_resume_filament.html#cancel
[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
CLEAR_PAUSE
SDCARD_RESET_FILE
PRINT_END
BASE_CANCEL_PRINT
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
@@ -677,8 +721,10 @@ gcode:
G1 E-5 F1800 ; retract filament
G91 ; relative positioning
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
TURN_OFF_HEATERS
M107 ; turn off fan
SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
## Removing this in favour of idle_timeout
# TURN_OFF_HEATERS
# M107 ; turn off fan
G1 Z2 F3000 ; move nozzle up 2mm
G90 ; absolute positioning
G0 X125 Y250 F3600 ; park nozzle at rear