3D-printer consumables #68

New Issue

rasmus · 2024-08-13T08:51:10Z

rasmus commented

2024-08-13 08:51:10 +00:00

Unsure what is bought, and what is needed.

Sander Jul 30th at 15:08:

PTFE tube - mostly for Build 3D filament drying box, but also good to have on hand. two meters should be good
Nevermore Carbon - not necessary, but good to have for odors and such
PT1000 Thermistor Cartridge - would be nice to have champer temps for the voron, definitely not necessary though
Extra nozzles - the one we have on the Voron is probably quite worn. there's regular brass nozzles, but we can also go for tungsten carbide if we never want to change our nozzles again. stuff like CHT nozzles are also an option if we want speedy prints, but I don't know if that's a concern for us (there's also high flow tungsten carbide apparently but that's an unknown quantity to me)
ADXL board - convenient for Input Shaping, which lets us have faster prints

Unsure what is bought, and what is needed. Sander Jul 30th at 15:08: - [PTFE tube](https://lecktor.com/en/v0-misc/541-240-ptfe-tube.html) - mostly for [Build 3D filament drying box](https://k-space-ee.slack.com/lists/T876F8TU4/F0788PCE19V?record_id=Rec07BZCBM6A1), but also good to have on hand. two meters should be good - [Nevermore Carbon](https://lecktor.com/en/nevermore/1357-nevermore-carbon-xl.html) - not necessary, but good to have for odors and such - [PT1000 Thermistor Cartridge](https://lecktor.com/en/sensors/961-thermistor-cartridge-pt1000-rtd-450c-00961.html) - would be nice to have champer temps for the voron, definitely not necessary though - Extra nozzles - the one we have on the Voron is probably quite worn. there's [regular brass nozzles](https://lecktor.com/en/nozzles/722-phaetus-brass-nozzle-04mm175mm.html), but we can also go for [tungsten carbide](https://alchemy3d.de/products/undertaker-tc-nozzle-by-west3d) if we never want to change our nozzles again. stuff like CHT nozzles are also an option if we want speedy prints, but I don't know if that's a concern for us (there's also [high flow tungsten carbide](https://provok3d.com/product/nanoflow-nozzle/?v=a57b8491d1d8#) apparently but that's an unknown quantity to me) - [ADXL board](https://alchemy3d.de/products/mellow-fly-nozzle-adxl?_pos=1&_sid=1cdcafdb5&_ss=r) - convenient for [Input Shaping](https://www.klipper3d.org/Resonance_Compensation.html), which lets us have faster prints

rasmus commented

2024-08-13 08:52:29 +00:00

Related: #66

Related: https://git.k-space.ee/k-space/todo/issues/66

lauri commented

2024-08-13 12:54:40 +00:00

@sander please split to issues and close this

sander was assigned by lauri

2024-08-13 12:54:45 +00:00

sander commented

2024-08-14 14:54:27 +00:00

@lauri not sure what you mean by "split to issues", you mean make a separate issue for each item?