13 lines
796 B
Markdown
13 lines
796 B
Markdown
# Software configuration and testing
|
|
|
|
## First things first
|
|
1. You need to adjust Spider serial (line 17 in printer.cfg) to match yours.
|
|
2. The configuration is preset for 350mm, go trough the configuration and adjust it in positions where you see 250mm or 300mm variants if you have different size kit.
|
|
3. Before heating the bed for first time, make sure it is only tightened in one corner (preferably the one next to the z-endstop sensor). If you need to do any adjustments with wires afterwards but before you have finished with bed make sure to temporarily tighten the bed down for that procedure.
|
|
4. Depending on you going with Fluidd or Mainsail way, only upload configs from respectable folders.
|
|
|
|
### Next: [Testing your work](../Testing/Readme.md)
|
|
|
|
---
|
|
### Back: [Manuals](../Readme.md)
|