updates configs

Manuals/Klipper/Mainsail/printer.cfg

@@ -257,7 +257,7 @@ rotation_distance: 22.7923459 # CALIBRATED for Stealthburner
 ##	Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
 ##	Use 80:20 for M4, M3.1
 ##  Use 7.5:1 for Galileo
-gear_ratio: 50:1				#for Galileo
+gear_ratio: 5:1				#for Galileo
 microsteps: 32
 full_steps_per_rotation: 200	#200 for 1.8 degree, 400 for 0.9 degree
 nozzle_diameter: 0.400
@@ -532,127 +532,11 @@ gcode:
 
 #--------------------------------------------------------------------
 
-
-#####################################################################
-#	Macros
-#####################################################################
-
-[gcode_macro CENTER]
-gcode:
-    G0 X175 Y175 Z30 F3600
-
-[gcode_macro G32]
-gcode:
-    SAVE_GCODE_STATE NAME=STATE_G32
-    G90
-    G28
-    QUAD_GANTRY_LEVEL
-    G28
-    
-    ##  Uncomment for for your size printer:
-    #--------------------------------------------------------------------
-    ##  Uncomment for 250mm build
-    #G0 X125 Y125 Z30 F3600
-    
-    ##  Uncomment for 300 build
-    #G0 X150 Y150 Z30 F3600
-    
-    ##  Uncomment for 350mm build
-    G0 X175 Y175 Z30 F3600
-    #--------------------------------------------------------------------
-    RESTORE_GCODE_STATE NAME=STATE_G32
-
-   
-[gcode_macro PRINT_START]
-#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
-gcode:
-    start_tones
-    BED_MESH_CLEAR
-    G32                            ; home all axes
-    BED_MESH_PROFILE LOAD=default
-    G90
-    G0 X175 Y175 Z30 F3600                   ; move nozzle away from bed 
-
-[gcode_macro PRINT_END]
-#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
-gcode:
-    M400                           ; wait for buffer to clear
-    G92 E0                         ; zero the extruder
-    G1 E-5 F1800                ; retract filament
-    G91                            ; relative positioning
-    G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
-    TURN_OFF_HEATERS
-    M107                           ; turn off fan
-    G1 Z2 F3000                    ; move nozzle up 2mm
-    G90                            ; absolute positioning
-    G0  X125 Y250 F3600            ; park nozzle at rear
-    BED_MESH_CLEAR
-    end_tones
-
-
-
-######################################################################
-# Beeper
-######################################################################
-
-# M300 : Play tone. Beeper support, as commonly found on usual LCD
-# displays (i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount
-# 12864 Full Graphic). This defines a custom I/O pin and a custom
-# GCODE macro.  Usage:
-#   M300 [P<ms>] [S<Hz>]
-#   P is the tone duration, S the tone frequency.
-# The frequency won't be pitch perfect.
-
-[output_pin BEEPER_pin]
-pin: PC9
-#   Beeper pin. This parameter must be provided.
-#   ar37 is the default RAMPS/MKS pin.
-pwm: True
-#   A piezo beeper needs a PWM signal, a DC buzzer doesn't.
-value: 0
-#   Silent at power on, set to 1 if active low.
-shutdown_value: 0
-#   Disable at emergency shutdown (no PWM would be available anyway).
-cycle_time: 0.001
-#   Default PWM frequency : 0.001 = 1ms will give a tone of 1kHz
-#   Although not pitch perfect.
-
-[gcode_macro M300]
-gcode:
-    # Use a default 1kHz tone if S is omitted.
-    {% set S = params.S|default(1000)|int %}
-    # Use a 10ms duration is P is omitted.
-    {% set P = params.P|default(100)|int %}
-    SET_PIN PIN=BEEPER_pin VALUE=0.5 CYCLE_TIME={ 1.0/S if S > 0 else 1 }
-    G4 P{P}
-    SET_PIN PIN=BEEPER_pin VALUE=0
-
-[gcode_macro start_tones]
-gcode:
-    M300 S1000 P500 ; chirp to indicate starting to print
-
-[gcode_macro end_tones]
-gcode:
-    M300 S440 P200 ; Make Print Completed Tones
-    M300 S660 P250
-    M300 S880 P300
-
-[gcode_macro error_tones]
-gcode:
-    M300 S700 P1500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-    M300 S700 P500 ; Make Print Completed Tones
-
 [include mainsail.cfg]
 [include menu_bed.cfg]
 [include leds.cfg]
 [include stealthburner_leds.cfg]
-
+[include macros.cfg]
 
 ## 	Common Temperature Sensors
 ##   "EPCOS 100K B57560G104F"