44 lines
1.1 KiB
Makefile
44 lines
1.1 KiB
Makefile
# This makefile:
|
|
# * Converts KiCad exported Gerber files to G-code files usable with LinuxCNC
|
|
# * Merges drill toolpaths to one 1mm drill toolpath
|
|
# * Reset coordinate system
|
|
# * Use resulting bla_front.ngc, bla_drill.ngc, bla_back.ngc files
|
|
|
|
PROJECT=nixiesp
|
|
MILL_FEED=70
|
|
DRILL_FEED=70
|
|
SPINDLE_SPEED=6000
|
|
FINISH_HEIGHT=40
|
|
DRILL_DEPTH=8
|
|
|
|
# Tiling
|
|
TILING_X=1
|
|
TILING_Y=1
|
|
|
|
all: ${PROJECT}_drill.ngc
|
|
|
|
%_drill.ngc: %.drl %-F.Cu.gtl %-B.Cu.gbl
|
|
pcb2gcode \
|
|
--zero-start \
|
|
--software linuxcnc \
|
|
--tile-x ${TILING_X} \
|
|
--tile-y ${TILING_Y} \
|
|
--front $*-F.Cu.gtl \
|
|
--back $*-B.Cu.gbl \
|
|
--drill $*.drl \
|
|
--front-output $*_front.ngc \
|
|
--back-output $*_back.ngc \
|
|
--drill-output $*_drill.ngc \
|
|
--metric \
|
|
--metricoutput \
|
|
--zsafe 1 --zchange ${FINISH_HEIGHT} --zcut 0 \
|
|
--cutter-diameter 5 --cut-feed ${MILL_FEED} --cut-speed ${SPINDLE_SPEED} --cut-infeed ${MILL_FEED} \
|
|
--zwork -0.2 --offset 0.1 --mill-feed ${MILL_FEED} --mill-speed ${SPINDLE_SPEED} \
|
|
--zdrill -${DRILL_DEPTH} --drill-feed ${DRILL_FEED} --drill-speed ${SPINDLE_SPEED}
|
|
|
|
clean:
|
|
rm -fv *.ngc
|
|
|
|
purge: clean
|
|
rm -fv *.g* *.drl *.dsn *.ses *.bak *.kicad_pcb-bak *.png *.svg *.net
|