lauri/nixiesp12
1
0
Fork 0
Code Issues 1 Pull Requests Activity

More assembly tips

Browse Source
This commit is contained in:
Lauri Võsandi 2017-08-09 01:49:41 +03:00
parent fe1b99dc0f
commit c2f7272a04
1 changed files with 9 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
README.md
View File

@ -7,7 +7,7 @@ Yet another Nixie clock project!
Some highlights: Some highlights:
* K155ID1 driven IN-12A or IN-12B tubes for hour, minute, seconds * K155ID1 driven IN-12A or IN-12B tubes for hour, minute, seconds
* BS107 driven IN-6 or similar for digit separation * BS107 driven IN-6 or similar neon bulbs for digit separation
* 74HC595 for serial to parallel conversion * 74HC595 for serial to parallel conversion
* ESP8266 for time synchronization * ESP8266 for time synchronization
* LM1117-3.3V and LM1117-5V regulators for logic power supply * LM1117-3.3V and LM1117-5V regulators for logic power supply
@ -46,3 +46,11 @@ Once the PCB is milled or etched make sure you clean the 180V rails thoroughly,
that voltage is high enough to cross gaps of 0.1mm. that voltage is high enough to cross gaps of 0.1mm.
Once that happens it burns a thick dark trace into the fiberglass of PCB and Once that happens it burns a thick dark trace into the fiberglass of PCB and
it's pretty tricky to clean up. it's pretty tricky to clean up.
Use the bench power supply to gradually power up the device,
at 9V set current limiter to 0.5A max.
5V linear regulator can be omitted and bypassed if 5V wall adapter is always used.
Otherwise 6V-12V wall adapters are suitable,
Thincan DBE60 9V wall adapters are pretty much perfect for the job.
Note that the higher the input voltage the more power is dissipated
as heat on the 3.3V and 5V voltage regulators, thus at 12V the device gets really hot.