1
0
mirror of https://github.com/laurivosandi/certidude synced 2024-12-22 16:25:17 +00:00
certidude/doc/builder/ap.sh

120 lines
3.7 KiB
Bash

#!/bin/bash
source common.sh
uci set certidude.@authority[0].trigger=lan
cat << \EOF > $OVERLAY/etc/uci-defaults/40-hostname
MODEL=$(cat /etc/board.json | jsonfilter -e '@["model"]["id"]')
# Hostname prefix
case $MODEL in
tl-*|archer-*) VENDOR=tplink ;;
cf-*) VENDOR=comfast ;;
*) VENDOR=ap ;;
esac
# Network interface with relevant MAC address
case $MODEL in
tl-wdr*) NIC=wlan1 ;;
archer-*) NIC=eth1 ;;
cf-e380ac-v2) NIC=eth0 ;;
*) NIC=wlan0 ;;
esac
HOSTNAME=$VENDOR-$(cat /sys/class/net/$NIC/address | cut -d : -f 4- | sed -e 's/://g')
uci set system.@system[0].hostname=$HOSTNAME
uci set network.lan.hostname=$HOSTNAME
EOF
cat << \EOF > $OVERLAY/etc/uci-defaults/50-access-point
# Remove firewall rules since AP bridges ethernet to wireless anyway
uci delete firewall.@zone[1]
uci delete firewall.@zone[0]
uci delete firewall.@forwarding[0]
for j in $(seq 0 10); do uci delete firewall.@rule[0]; done
# Remove WAN interface
uci delete network.wan
uci delete network.wan6
# Reconfigure DHCP client for bridge over LAN and WAN ports
uci delete network.lan.ipaddr
uci delete network.lan.netmask
uci delete network.lan.ip6assign
uci delete network.globals.ula_prefix
uci delete network.@switch_vlan[1]
uci delete dhcp.@dnsmasq[0].domain
uci set network.lan.proto=dhcp
uci set network.lan.ipv6=0
uci set network.lan.ifname='eth0'
uci set network.lan.stp=1
# Radio ordering differs among models
case $(uci get wireless.radio0.hwmode) in
11a) uci rename wireless.radio0=radio5ghz;;
11g) uci rename wireless.radio0=radio2ghz;;
esac
case $(uci get wireless.radio1.hwmode) in
11a) uci rename wireless.radio1=radio5ghz;;
11g) uci rename wireless.radio1=radio2ghz;;
esac
# Reset virtual SSID-s
uci delete wireless.@wifi-iface[1]
uci delete wireless.@wifi-iface[0]
# Pseudorandomize channel selection, should work with 80MHz on 5GHz band
case $(uci get system.@system[0].hostname | md5sum) in
1*|2*|3*|4*) uci set wireless.radio2ghz.channel=1; uci set wireless.radio5ghz.channel=36 ;;
5*|6*|7*|8*) uci set wireless.radio2ghz.channel=5; uci set wireless.radio5ghz.channel=52 ;;
9*|0*|a*|b*) uci set wireless.radio2ghz.channel=9; uci set wireless.radio5ghz.channel=100 ;;
c*|d*|e*|f*) uci set wireless.radio2ghz.channel=13; uci set wireless.radio5ghz.channel=132 ;;
esac
# Create bridge for guests
uci set network.guest=interface
uci set network.guest.proto='static'
uci set network.guest.address='0.0.0.0'
uci set network.guest.type='bridge'
uci set network.guest.ifname='eth0.156' # tag id 156 for guest network
uci set network.guest.ipaddr='0.0.0.0'
uci set network.guest.ipv6=0
uci set network.guest.stp=1
# Add VPN interface for IPSec
uci set network.vpn=interface
uci set network.vpn.ifname='ipsec0'
uci set network.vpn.proto='none'
uci set firewall.vpn=zone
uci set firewall.vpn.name="vpn"
uci set firewall.vpn.input="ACCEPT"
uci set firewall.vpn.forward="ACCEPT"
uci set firewall.vpn.output="ACCEPT"
uci set firewall.vpn.network="vpn"
# Disable switch tagging and bridge all ports on TP-Link WDR3600/WDR4300
case $(cat /etc/board.json | jsonfilter -e '@["model"]["id"]') in
tl-wdr*|archer*)
uci set network.@switch[0].enable_vlan=0
uci set network.@switch_vlan[0].ports='0 1 2 3 4 5 6'
;;
*) ;;
esac
EOF
make -C $BUILD/$BASENAME image FILES=$OVERLAY PROFILE=$PROFILE PACKAGES="luci luci-app-commands \
openssl-util curl ca-certificates \
strongswan-mod-kernel-libipsec kmod-tun ip-full strongswan-full \
htop iftop tcpdump nmap nano -odhcp6c -odhcpd -dnsmasq \
-luci-app-firewall \
-pppd -luci-proto-ppp -kmod-ppp -ppp -ppp-mod-pppoe \
-kmod-ip6tables -ip6tables -luci-proto-ipv6 -kmod-iptunnel6 -kmod-ipsec6"