mirror of
https://github.com/laurivosandi/certidude
synced 2025-09-07 14:11:05 +00:00
Cleaned up LEDE image builder scripts
This commit is contained in:
119
doc/builder/ap.sh
Normal file
119
doc/builder/ap.sh
Normal file
@@ -0,0 +1,119 @@
|
||||
#!/bin/bash
|
||||
|
||||
source common.sh
|
||||
|
||||
uci set certidude.@authority[0].trigger=lan
|
||||
|
||||
cat << \EOF > $OVERLAY/etc/uci-defaults/40-hostname
|
||||
|
||||
MODEL=$(cat /etc/board.json | jsonfilter -e '@["model"]["id"]')
|
||||
|
||||
# Hostname prefix
|
||||
case $MODEL in
|
||||
tl-*|archer-*) VENDOR=tplink ;;
|
||||
cf-*) VENDOR=comfast ;;
|
||||
*) VENDOR=ap ;;
|
||||
esac
|
||||
|
||||
# Network interface with relevant MAC address
|
||||
case $MODEL in
|
||||
tl-wdr*) NIC=wlan1 ;;
|
||||
archer-*) NIC=eth1 ;;
|
||||
cf-e380ac-v2) NIC=eth0 ;;
|
||||
*) NIC=wlan0 ;;
|
||||
esac
|
||||
|
||||
HOSTNAME=$VENDOR-$(cat /sys/class/net/$NIC/address | cut -d : -f 4- | sed -e 's/://g')
|
||||
uci set system.@system[0].hostname=$HOSTNAME
|
||||
uci set network.lan.hostname=$HOSTNAME
|
||||
|
||||
EOF
|
||||
|
||||
cat << \EOF > $OVERLAY/etc/uci-defaults/50-access-point
|
||||
|
||||
# Remove firewall rules since AP bridges ethernet to wireless anyway
|
||||
uci delete firewall.@zone[1]
|
||||
uci delete firewall.@zone[0]
|
||||
uci delete firewall.@forwarding[0]
|
||||
for j in $(seq 0 10); do uci delete firewall.@rule[0]; done
|
||||
|
||||
# Remove WAN interface
|
||||
uci delete network.wan
|
||||
uci delete network.wan6
|
||||
|
||||
# Reconfigure DHCP client for bridge over LAN and WAN ports
|
||||
uci delete network.lan.ipaddr
|
||||
uci delete network.lan.netmask
|
||||
uci delete network.lan.ip6assign
|
||||
uci delete network.globals.ula_prefix
|
||||
uci delete network.@switch_vlan[1]
|
||||
uci delete dhcp.@dnsmasq[0].domain
|
||||
uci set network.lan.proto=dhcp
|
||||
uci set network.lan.ipv6=0
|
||||
uci set network.lan.ifname='eth0'
|
||||
uci set network.lan.stp=1
|
||||
|
||||
# Radio ordering differs among models
|
||||
case $(uci get wireless.radio0.hwmode) in
|
||||
11a) uci rename wireless.radio0=radio5ghz;;
|
||||
11g) uci rename wireless.radio0=radio2ghz;;
|
||||
esac
|
||||
case $(uci get wireless.radio1.hwmode) in
|
||||
11a) uci rename wireless.radio1=radio5ghz;;
|
||||
11g) uci rename wireless.radio1=radio2ghz;;
|
||||
esac
|
||||
|
||||
# Reset virtual SSID-s
|
||||
uci delete wireless.@wifi-iface[1]
|
||||
uci delete wireless.@wifi-iface[0]
|
||||
|
||||
# Pseudorandomize channel selection, should work with 80MHz on 5GHz band
|
||||
case $(uci get system.@system[0].hostname | md5sum) in
|
||||
1*|2*|3*|4*) uci set wireless.radio2ghz.channel=1; uci set wireless.radio5ghz.channel=36 ;;
|
||||
5*|6*|7*|8*) uci set wireless.radio2ghz.channel=5; uci set wireless.radio5ghz.channel=52 ;;
|
||||
9*|0*|a*|b*) uci set wireless.radio2ghz.channel=9; uci set wireless.radio5ghz.channel=100 ;;
|
||||
c*|d*|e*|f*) uci set wireless.radio2ghz.channel=13; uci set wireless.radio5ghz.channel=132 ;;
|
||||
esac
|
||||
|
||||
# Create bridge for guests
|
||||
uci set network.guest=interface
|
||||
uci set network.guest.proto='static'
|
||||
uci set network.guest.address='0.0.0.0'
|
||||
uci set network.guest.type='bridge'
|
||||
uci set network.guest.ifname='eth0.156' # tag id 156 for guest network
|
||||
uci set network.guest.ipaddr='0.0.0.0'
|
||||
uci set network.guest.ipv6=0
|
||||
uci set network.guest.stp=1
|
||||
|
||||
# Add VPN interface for IPSec
|
||||
uci set network.vpn=interface
|
||||
uci set network.vpn.ifname='ipsec0'
|
||||
uci set network.vpn.proto='none'
|
||||
|
||||
uci set firewall.vpn=zone
|
||||
uci set firewall.vpn.name="vpn"
|
||||
uci set firewall.vpn.input="ACCEPT"
|
||||
uci set firewall.vpn.forward="ACCEPT"
|
||||
uci set firewall.vpn.output="ACCEPT"
|
||||
uci set firewall.vpn.network="vpn"
|
||||
|
||||
# Disable switch tagging and bridge all ports on TP-Link WDR3600/WDR4300
|
||||
case $(cat /etc/board.json | jsonfilter -e '@["model"]["id"]') in
|
||||
tl-wdr*|archer*)
|
||||
uci set network.@switch[0].enable_vlan=0
|
||||
uci set network.@switch_vlan[0].ports='0 1 2 3 4 5 6'
|
||||
;;
|
||||
*) ;;
|
||||
esac
|
||||
|
||||
EOF
|
||||
|
||||
make -C $BUILD/$BASENAME image FILES=$OVERLAY PROFILE=$PROFILE PACKAGES="luci luci-app-commands \
|
||||
openssl-util curl ca-certificates \
|
||||
strongswan-mod-kernel-libipsec kmod-tun ip-full strongswan-full \
|
||||
htop iftop tcpdump nmap nano -odhcp6c -odhcpd -dnsmasq \
|
||||
-luci-app-firewall \
|
||||
-pppd -luci-proto-ppp -kmod-ppp -ppp -ppp-mod-pppoe \
|
||||
-kmod-ip6tables -ip6tables -luci-proto-ipv6 -kmod-iptunnel6 -kmod-ipsec6"
|
||||
|
||||
|
||||
76
doc/builder/common.sh
Normal file
76
doc/builder/common.sh
Normal file
@@ -0,0 +1,76 @@
|
||||
#!/bin/bash
|
||||
|
||||
set -e
|
||||
set -x
|
||||
umask 022
|
||||
|
||||
VERSION=17.01.4
|
||||
BASENAME=lede-imagebuilder-$VERSION-ar71xx-generic.Linux-x86_64
|
||||
FILENAME=$BASENAME.tar.xz
|
||||
URL=http://downloads.lede-project.org/releases/$VERSION/targets/ar71xx/generic/$FILENAME
|
||||
|
||||
if [ ! -e $BUILD/$FILENAME ]; then
|
||||
wget -q $URL -O $BUILD/$FILENAME
|
||||
fi
|
||||
|
||||
if [ ! -e $BUILD/$BASENAME ]; then
|
||||
tar xf $BUILD/$FILENAME -C $BUILD
|
||||
fi
|
||||
|
||||
# Copy CA certificate
|
||||
AUTHORITY=$(hostname -f)
|
||||
CERTIDUDE_DIR=/var/lib/certidude/$AUTHORITY
|
||||
|
||||
mkdir -p $OVERLAY/etc/config
|
||||
mkdir -p $OVERLAY/etc/uci-defaults
|
||||
mkdir -p $OVERLAY/etc/certidude/authority/$AUTHORITY
|
||||
cp /var/lib/certidude/$AUTHORITY/ca_cert.pem $OVERLAY/etc/certidude/authority/$AUTHORITY/
|
||||
|
||||
cat <<EOF > $OVERLAY/etc/config/certidude
|
||||
|
||||
config authority
|
||||
option gateway router.k-space.ee
|
||||
option url http://$AUTHORITY
|
||||
option trigger wan
|
||||
option authority_path /etc/certidude/authority/$AUTHORITY/ca_cert.pem
|
||||
option request_path /etc/certidude/authority/$AUTHORITY/client_req.pem
|
||||
option certificate_path /etc/certidude/authority/$AUTHORITY/client_cert.pem
|
||||
option key_path /etc/certidude/authority/$AUTHORITY/client_key.pem
|
||||
option key_type rsa
|
||||
option key_length 2048
|
||||
|
||||
EOF
|
||||
|
||||
cat << EOF > $OVERLAY/etc/uci-defaults/40-disable-ipsec
|
||||
/etc/init.d/ipsec disable
|
||||
EOF
|
||||
|
||||
|
||||
|
||||
cat << EOF > $OVERLAY/etc/ipsec.secrets
|
||||
: RSA /etc/certidude/authority/$AUTHORITY/client_key.pem
|
||||
EOF
|
||||
|
||||
cat << EOF > $OVERLAY/etc/ipsec.conf
|
||||
|
||||
config setup
|
||||
|
||||
ca $AUTHORITY
|
||||
cacert=/etc/certidude/authority/$AUTHORITY/ca_cert.pem
|
||||
auto=add
|
||||
|
||||
conn router.k-space.ee
|
||||
right=router.k-space.ee
|
||||
dpdaction=restart
|
||||
auto=start
|
||||
rightsubnet=0.0.0.0/0
|
||||
rightid=%any
|
||||
leftsourceip=%config
|
||||
keyexchange=ikev2
|
||||
closeaction=restart
|
||||
leftcert=/etc/certidude/authority/$AUTHORITY/client_cert.pem
|
||||
left=%defaultroute
|
||||
|
||||
EOF
|
||||
|
||||
|
||||
43
doc/builder/ipcam.sh
Normal file
43
doc/builder/ipcam.sh
Normal file
@@ -0,0 +1,43 @@
|
||||
#!/bin/bash
|
||||
|
||||
. common.sh
|
||||
|
||||
cat << \EOF > $OVERLAY/etc/uci-defaults/40-hostname
|
||||
|
||||
HOSTNAME=cam-$(cat /sys/class/net/eth0/address | cut -d : -f 4- | sed -e 's/://g')
|
||||
uci set system.@system[0].hostname=$HOSTNAME
|
||||
uci set network.wan.hostname=$HOSTNAME
|
||||
|
||||
EOF
|
||||
|
||||
touch $OVERLAY/etc/config/wireless
|
||||
|
||||
cat << EOF > $OVERLAY/etc/uci-defaults/50-ipcam
|
||||
|
||||
uci delete network.lan
|
||||
uci delete network.wan6
|
||||
|
||||
uci set network.vpn=interface
|
||||
uci set network.vpn.ifname='ipsec0'
|
||||
uci set network.vpn.proto='none'
|
||||
uci set firewall.@zone[0].network=vpn
|
||||
uci delete firewall.@forwarding[0]
|
||||
|
||||
uci set mjpg-streamer.core.enabled=1
|
||||
uci set mjpg-streamer.core.quality=''
|
||||
uci set mjpg-streamer.core.resolution='1280x720'
|
||||
uci delete mjpg-streamer.core.username
|
||||
uci delete mjpg-streamer.core.password
|
||||
|
||||
uci certidude.@authority[0].red_led='gl-connect:red:wlan'
|
||||
uci certidude.@authority[0].green_led='gl-connect:green:lan'
|
||||
|
||||
/etc/init.d/dropbear disable
|
||||
/etc/init.d/ipsec disable
|
||||
|
||||
EOF
|
||||
|
||||
|
||||
make -C $BUILD/$BASENAME image FILES=$OVERLAY PROFILE=$PROFILE PACKAGES="openssl-util curl ca-certificates strongswan-full htop \
|
||||
iftop tcpdump nmap nano mtr patch diffutils ipset usbutils luci luci-app-mjpg-streamer kmod-video-uvc \
|
||||
pciutils -dnsmasq -odhcpd -odhcp6c -kmod-ath9k picocom strongswan-mod-kernel-libipsec kmod-tun ip-full"
|
||||
110
doc/builder/mfp.sh
Normal file
110
doc/builder/mfp.sh
Normal file
@@ -0,0 +1,110 @@
|
||||
#!/bin/bash
|
||||
|
||||
. common.sh
|
||||
|
||||
cat << \EOF > $OVERLAY/etc/uci-defaults/40-hostname
|
||||
|
||||
HOSTNAME=mfp-$(cat /sys/class/net/eth0/address | cut -d : -f 4- | sed -e 's/://g')
|
||||
uci set system.@system[0].hostname=$HOSTNAME
|
||||
uci set network.wan.hostname=$HOSTNAME
|
||||
|
||||
EOF
|
||||
|
||||
mkdir -p $OVERLAY/etc/config/
|
||||
touch $OVERLAY/etc/config/wireless
|
||||
|
||||
cat << EOF > $OVERLAY/etc/uci-defaults/50-mfp
|
||||
|
||||
# Disable rebind protection for DNS
|
||||
uci set dhcp.@dnsmasq[0].rebind_protection=0
|
||||
uci set dhcp.@dnsmasq[0].domain='mfp.lan'
|
||||
uci delete dhcp.@dnsmasq[0].local
|
||||
|
||||
# Disable bridge for LAN since WiFi is disabled
|
||||
uci delete network.lan.type
|
||||
uci set dhcp.lan.limit=1
|
||||
|
||||
uci set network.vpn=interface
|
||||
uci set network.vpn.ifname='ipsec0'
|
||||
uci set network.vpn.proto='none'
|
||||
|
||||
uci set firewall.vpn=zone
|
||||
uci set firewall.vpn.name="vpn"
|
||||
uci set firewall.vpn.input="ACCEPT"
|
||||
uci set firewall.vpn.forward="ACCEPT"
|
||||
uci set firewall.vpn.output="ACCEPT"
|
||||
uci set firewall.vpn.network="vpn"
|
||||
|
||||
uci set firewall.lan2vpn=forwarding
|
||||
uci set firewall.lan2vpn.src='lan'
|
||||
uci set firewall.lan2vpn.dest='vpn'
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow IPP on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=631
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=tcp
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow HTTP on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=80
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=tcp
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow HTTPS on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=443
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=tcp
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow JetDirect on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=9100
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=tcp
|
||||
uci set firewall.@redirect[-1].enabled=0
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow SNMP on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=161
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=udp
|
||||
uci set firewall.@redirect[-1].enabled=0
|
||||
|
||||
uci add firewall redirect
|
||||
uci set firewall.@redirect[-1].name="Allow LPD on MFP"
|
||||
uci set firewall.@redirect[-1].src=vpn
|
||||
uci set firewall.@redirect[-1].src_dport=515
|
||||
uci set firewall.@redirect[-1].dest=lan
|
||||
uci set firewall.@redirect[-1].dest_ip=192.168.1.100
|
||||
uci set firewall.@redirect[-1].target=DNAT
|
||||
uci set firewall.@redirect[-1].proto=tcp
|
||||
uci set firewall.@redirect[-1].enabled=0
|
||||
|
||||
uci set uhttpd.main.listen_http=0.0.0.0:8080
|
||||
|
||||
/etc/init.d/dropbear disable
|
||||
|
||||
EOF
|
||||
|
||||
make -C $BUILD/$BASENAME image FILES=$OVERLAY PROFILE=$PROFILE PACKAGES="openssl-util curl ca-certificates htop \
|
||||
iftop tcpdump nmap nano mtr patch diffutils ipset usbutils luci \
|
||||
strongswan-mod-kernel-libipsec kmod-tun ip-full strongswan-full \
|
||||
pciutils -odhcpd -odhcp6c -kmod-ath9k picocom libustream-openssl kmod-crypto-gcm"
|
||||
|
||||
|
||||
Reference in New Issue
Block a user