k-space/voron-config
11
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Activity
Files
a2e4a495b40f79d581d9c516963b131617fd80a3
voron-config/leds.cfg
voron-automated b90978b1cb initial commit
2025-05-08 18:56:00 +03:00

266 lines
11 KiB
INI
Raw Blame History

[neopixel Case_Lights]
# To control Neopixel RGB in mini12864 display
pin: PB14
chain_count: 70
initial_RED: 0.5
initial_GREEN: 0.5
initial_BLUE: 0.5
initial_WHITE: 1
color_order: GRBW
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
#
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
#####################################
# INSTRUCTIONS #
#####################################
# How to use all this stuff:
#
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
# to the top of your printer.cfg in order for register the LEDs and macros with Klipper.
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
# as well as the color order.
#
# Note: RGB and RGBW are different and must be defined explicitly. RGB and RGBW are also not able to
# be mix-and-matched in the same chain. A separate data line would be needed for proper functioning.
#
# RGBW LEDs will have a visible yellow-ish phosphor section to the chip. If your LEDs do not have
# this yellow portion, you have RGB LEDs.
#
# 3. Save your config and restart Klipper.
#
# Note: We set RED and BLUE to 1.0 to make it easier for users and supporters to detect
# misconfigurations or miswiring. The default color format is for Neopixels with a dedicated
# white LED. On startup, all three SB LEDs should light up.
#
# If you get random colors across your LEDs, change the color_order to GRB and restart. Then
# omit the W for each suggested color_order in the next paragraph.
#
# If you get MAGENTA, your color order is correct. If you get CYAN, you need to use RGBW. If
# you get YELLOW, you need to use BRGW (note that BRG is only supported in the latest Klipper
# version).
#
# 4. Once you have confirmed that the LEDs are set up correctly, you must now decide where you want
# these macros called up...which means adding them to your existing gcode macros. NOTHING will happen
# unless you add the STATUS_????? macros to your existing gcode macros.
#
# Example: add STATUS_LEVELING to the beginning of your QGL gcode macro, and then add STATUS_READY
# to the end of it to set the logo LED and nozzle LEDs back to the `ready` state.
#
# Example: add STATUS_CLEANING to the beginning of your nozzle-cleaning macro, and then STATUS_READY
# to the end of it to return the LEDs back to `ready` state.
#
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
# are just an example of what is possible. If you want to try some more complex animations, you will most
# likely have to use WLED with Moonraker and a small micro-controller (please see the LED thread for help inside
# of the stealthburner_beta channel on Discord).
#
#####################################
# END INSTRUCTRUCTIONS #
#####################################
[neopixel sb_leds]
pin: PD3
# The pin connected to the neopixel. This parameter must be provided.
chain_count: 3
# The number of Neopixel chips that are "daisy chained" to the
# provided pin. The default is 1 (which indicates only a single
# Neopixel is connected to the pin).
color_order: GRBW
# Set the pixel order required by the LED hardware. Options are GRB,
# RGB, GRBW, or RGBW. The default is GRB.
initial_RED: 1.0
initial_GREEN: 0.0
initial_BLUE: 1.0
initial_WHITE: 0.0
# Sets the initial LED color of the Neopixel. Each value should be
# between 0.0 and 1.0. The WHITE option is only available on RGBW
# LEDs. The default for each color is 0.#
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
# at the start of this file.
##########
# MACROS #
##########
# The following status macros are available (these go inside of your macros):
#
# STATUS_READY
# STATUS_OFF
# STATUS_BUSY
# STATUS_HEATING
# STATUS_LEVELING
# STATUS_HOMING
# STATUS_CLEANING
# STATUS_MESHING
# STATUS_CALIBRATING_Z
#
# With additional macros for basic control:
#
# SET_NOZZLE_LEDS_ON
# SET_LOGO_LEDS_OFF
# SET_NOZZLE_LEDS_OFF
#
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
[gcode_macro _sb_vars]
# User settings for the StealthBurner status leds. You can change the status colors and led
# configurations for the logo and nozzle here.
variable_colors: {
'logo': { # Colors for logo states
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
},
'nozzle': { # Colors for nozzle states
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
},
'thermal': {
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
}
}
variable_logo_led_name: "sb_leds"
# The name of the addressable LED chain that contains the logo LED(s)
variable_logo_idx: "1"
# A comma-separated list of indexes LEDs in the logo
variable_nozzle_led_name: "sb_leds"
# The name of the addressable LED chain that contains the nozzle LED(s). This will
# typically be the same LED chain as the logo.
variable_nozzle_idx: "2,3"
# A comma-separated list of indexes of LEDs in the nozzle
gcode:
# This section is required. Do Not Delete.
[gcode_macro _set_sb_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = params.LED|string %}
{% set idx = (params.IDX|string).split(',') %}
{% set transmit_last = params.TRANSMIT|default(1) %}
{% for led_index in idx %}
{% set transmit=transmit_last if loop.last else 0 %}
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
{% endfor %}
[gcode_macro _set_sb_leds_by_name]
gcode:
{% set leds_name = params.LEDS %}
{% set color_name = params.COLOR %}
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
{% set transmit = params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
[gcode_macro _set_logo_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro _set_nozzle_leds]
gcode:
{% set red = params.RED|default(0)|float %}
{% set green = params.GREEN|default(0)|float %}
{% set blue = params.BLUE|default(0)|float %}
{% set white = params.WHITE|default(0)|float %}
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
[gcode_macro set_logo_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
[gcode_macro set_nozzle_leds_on]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
[gcode_macro set_nozzle_leds_off]
gcode:
{% set transmit=params.TRANSMIT|default(1) %}
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
[gcode_macro status_off]
gcode:
set_logo_leds_off transmit=0
set_nozzle_leds_off
[gcode_macro status_ready]
gcode:
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
[gcode_macro status_busy]
gcode:
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
set_nozzle_leds_on
[gcode_macro status_heating]
gcode:
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
[gcode_macro status_leveling]
gcode:
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
set_nozzle_leds_on
[gcode_macro status_homing]
gcode:
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
set_nozzle_leds_on
[gcode_macro status_cleaning]
gcode:
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
set_nozzle_leds_on
[gcode_macro status_meshing]
gcode:
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
set_nozzle_leds_on
[gcode_macro status_calibrating_z]
gcode:
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
set_nozzle_leds_on
[gcode_macro status_printing]
gcode:
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
set_nozzle_leds_on
Reference in New Issue View Git Blame Copy Permalink