logmower-shipper/vendor/github.com/klauspost/compress/huff0/bitreader.go
rasmus e45bf4739b go mod vendor
+ move k8s.io/apimachinery fork from go.work to go.mod
(and include it in vendor)
2022-11-07 00:26:05 +02:00

234 lines
5.7 KiB
Go

// Copyright 2018 Klaus Post. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Based on work Copyright (c) 2013, Yann Collet, released under BSD License.
package huff0
import (
"encoding/binary"
"errors"
"fmt"
"io"
)
// bitReader reads a bitstream in reverse.
// The last set bit indicates the start of the stream and is used
// for aligning the input.
type bitReaderBytes struct {
in []byte
off uint // next byte to read is at in[off - 1]
value uint64
bitsRead uint8
}
// init initializes and resets the bit reader.
func (b *bitReaderBytes) init(in []byte) error {
if len(in) < 1 {
return errors.New("corrupt stream: too short")
}
b.in = in
b.off = uint(len(in))
// The highest bit of the last byte indicates where to start
v := in[len(in)-1]
if v == 0 {
return errors.New("corrupt stream, did not find end of stream")
}
b.bitsRead = 64
b.value = 0
if len(in) >= 8 {
b.fillFastStart()
} else {
b.fill()
b.fill()
}
b.advance(8 - uint8(highBit32(uint32(v))))
return nil
}
// peekBitsFast requires that at least one bit is requested every time.
// There are no checks if the buffer is filled.
func (b *bitReaderBytes) peekByteFast() uint8 {
got := uint8(b.value >> 56)
return got
}
func (b *bitReaderBytes) advance(n uint8) {
b.bitsRead += n
b.value <<= n & 63
}
// fillFast() will make sure at least 32 bits are available.
// There must be at least 4 bytes available.
func (b *bitReaderBytes) fillFast() {
if b.bitsRead < 32 {
return
}
// 2 bounds checks.
v := b.in[b.off-4 : b.off]
v = v[:4]
low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
b.value |= uint64(low) << (b.bitsRead - 32)
b.bitsRead -= 32
b.off -= 4
}
// fillFastStart() assumes the bitReaderBytes is empty and there is at least 8 bytes to read.
func (b *bitReaderBytes) fillFastStart() {
// Do single re-slice to avoid bounds checks.
b.value = binary.LittleEndian.Uint64(b.in[b.off-8:])
b.bitsRead = 0
b.off -= 8
}
// fill() will make sure at least 32 bits are available.
func (b *bitReaderBytes) fill() {
if b.bitsRead < 32 {
return
}
if b.off > 4 {
v := b.in[b.off-4:]
v = v[:4]
low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
b.value |= uint64(low) << (b.bitsRead - 32)
b.bitsRead -= 32
b.off -= 4
return
}
for b.off > 0 {
b.value |= uint64(b.in[b.off-1]) << (b.bitsRead - 8)
b.bitsRead -= 8
b.off--
}
}
// finished returns true if all bits have been read from the bit stream.
func (b *bitReaderBytes) finished() bool {
return b.off == 0 && b.bitsRead >= 64
}
func (b *bitReaderBytes) remaining() uint {
return b.off*8 + uint(64-b.bitsRead)
}
// close the bitstream and returns an error if out-of-buffer reads occurred.
func (b *bitReaderBytes) close() error {
// Release reference.
b.in = nil
if b.remaining() > 0 {
return fmt.Errorf("corrupt input: %d bits remain on stream", b.remaining())
}
if b.bitsRead > 64 {
return io.ErrUnexpectedEOF
}
return nil
}
// bitReaderShifted reads a bitstream in reverse.
// The last set bit indicates the start of the stream and is used
// for aligning the input.
type bitReaderShifted struct {
in []byte
off uint // next byte to read is at in[off - 1]
value uint64
bitsRead uint8
}
// init initializes and resets the bit reader.
func (b *bitReaderShifted) init(in []byte) error {
if len(in) < 1 {
return errors.New("corrupt stream: too short")
}
b.in = in
b.off = uint(len(in))
// The highest bit of the last byte indicates where to start
v := in[len(in)-1]
if v == 0 {
return errors.New("corrupt stream, did not find end of stream")
}
b.bitsRead = 64
b.value = 0
if len(in) >= 8 {
b.fillFastStart()
} else {
b.fill()
b.fill()
}
b.advance(8 - uint8(highBit32(uint32(v))))
return nil
}
// peekBitsFast requires that at least one bit is requested every time.
// There are no checks if the buffer is filled.
func (b *bitReaderShifted) peekBitsFast(n uint8) uint16 {
return uint16(b.value >> ((64 - n) & 63))
}
func (b *bitReaderShifted) advance(n uint8) {
b.bitsRead += n
b.value <<= n & 63
}
// fillFast() will make sure at least 32 bits are available.
// There must be at least 4 bytes available.
func (b *bitReaderShifted) fillFast() {
if b.bitsRead < 32 {
return
}
// 2 bounds checks.
v := b.in[b.off-4 : b.off]
v = v[:4]
low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
b.value |= uint64(low) << ((b.bitsRead - 32) & 63)
b.bitsRead -= 32
b.off -= 4
}
// fillFastStart() assumes the bitReaderShifted is empty and there is at least 8 bytes to read.
func (b *bitReaderShifted) fillFastStart() {
// Do single re-slice to avoid bounds checks.
b.value = binary.LittleEndian.Uint64(b.in[b.off-8:])
b.bitsRead = 0
b.off -= 8
}
// fill() will make sure at least 32 bits are available.
func (b *bitReaderShifted) fill() {
if b.bitsRead < 32 {
return
}
if b.off > 4 {
v := b.in[b.off-4:]
v = v[:4]
low := (uint32(v[0])) | (uint32(v[1]) << 8) | (uint32(v[2]) << 16) | (uint32(v[3]) << 24)
b.value |= uint64(low) << ((b.bitsRead - 32) & 63)
b.bitsRead -= 32
b.off -= 4
return
}
for b.off > 0 {
b.value |= uint64(b.in[b.off-1]) << ((b.bitsRead - 8) & 63)
b.bitsRead -= 8
b.off--
}
}
func (b *bitReaderShifted) remaining() uint {
return b.off*8 + uint(64-b.bitsRead)
}
// close the bitstream and returns an error if out-of-buffer reads occurred.
func (b *bitReaderShifted) close() error {
// Release reference.
b.in = nil
if b.remaining() > 0 {
return fmt.Errorf("corrupt input: %d bits remain on stream", b.remaining())
}
if b.bitsRead > 64 {
return io.ErrUnexpectedEOF
}
return nil
}