226 lines
11 KiB
Go
226 lines
11 KiB
Go
// Code generated by protoc-gen-go.
|
|
// source: google/protobuf/compiler/plugin.proto
|
|
// DO NOT EDIT!
|
|
|
|
/*
|
|
Package plugin_go is a generated protocol buffer package.
|
|
|
|
It is generated from these files:
|
|
google/protobuf/compiler/plugin.proto
|
|
|
|
It has these top-level messages:
|
|
CodeGeneratorRequest
|
|
CodeGeneratorResponse
|
|
*/
|
|
package plugin_go
|
|
|
|
import proto "github.com/golang/protobuf/proto"
|
|
import fmt "fmt"
|
|
import math "math"
|
|
import google_protobuf "github.com/golang/protobuf/protoc-gen-go/descriptor"
|
|
|
|
// Reference imports to suppress errors if they are not otherwise used.
|
|
var _ = proto.Marshal
|
|
var _ = fmt.Errorf
|
|
var _ = math.Inf
|
|
|
|
// This is a compile-time assertion to ensure that this generated file
|
|
// is compatible with the proto package it is being compiled against.
|
|
const _ = proto.ProtoPackageIsVersion1
|
|
|
|
// An encoded CodeGeneratorRequest is written to the plugin's stdin.
|
|
type CodeGeneratorRequest struct {
|
|
// The .proto files that were explicitly listed on the command-line. The
|
|
// code generator should generate code only for these files. Each file's
|
|
// descriptor will be included in proto_file, below.
|
|
FileToGenerate []string `protobuf:"bytes,1,rep,name=file_to_generate,json=fileToGenerate" json:"file_to_generate,omitempty"`
|
|
// The generator parameter passed on the command-line.
|
|
Parameter *string `protobuf:"bytes,2,opt,name=parameter" json:"parameter,omitempty"`
|
|
// FileDescriptorProtos for all files in files_to_generate and everything
|
|
// they import. The files will appear in topological order, so each file
|
|
// appears before any file that imports it.
|
|
//
|
|
// protoc guarantees that all proto_files will be written after
|
|
// the fields above, even though this is not technically guaranteed by the
|
|
// protobuf wire format. This theoretically could allow a plugin to stream
|
|
// in the FileDescriptorProtos and handle them one by one rather than read
|
|
// the entire set into memory at once. However, as of this writing, this
|
|
// is not similarly optimized on protoc's end -- it will store all fields in
|
|
// memory at once before sending them to the plugin.
|
|
ProtoFile []*google_protobuf.FileDescriptorProto `protobuf:"bytes,15,rep,name=proto_file,json=protoFile" json:"proto_file,omitempty"`
|
|
XXX_unrecognized []byte `json:"-"`
|
|
}
|
|
|
|
func (m *CodeGeneratorRequest) Reset() { *m = CodeGeneratorRequest{} }
|
|
func (m *CodeGeneratorRequest) String() string { return proto.CompactTextString(m) }
|
|
func (*CodeGeneratorRequest) ProtoMessage() {}
|
|
func (*CodeGeneratorRequest) Descriptor() ([]byte, []int) { return fileDescriptor0, []int{0} }
|
|
|
|
func (m *CodeGeneratorRequest) GetFileToGenerate() []string {
|
|
if m != nil {
|
|
return m.FileToGenerate
|
|
}
|
|
return nil
|
|
}
|
|
|
|
func (m *CodeGeneratorRequest) GetParameter() string {
|
|
if m != nil && m.Parameter != nil {
|
|
return *m.Parameter
|
|
}
|
|
return ""
|
|
}
|
|
|
|
func (m *CodeGeneratorRequest) GetProtoFile() []*google_protobuf.FileDescriptorProto {
|
|
if m != nil {
|
|
return m.ProtoFile
|
|
}
|
|
return nil
|
|
}
|
|
|
|
// The plugin writes an encoded CodeGeneratorResponse to stdout.
|
|
type CodeGeneratorResponse struct {
|
|
// Error message. If non-empty, code generation failed. The plugin process
|
|
// should exit with status code zero even if it reports an error in this way.
|
|
//
|
|
// This should be used to indicate errors in .proto files which prevent the
|
|
// code generator from generating correct code. Errors which indicate a
|
|
// problem in protoc itself -- such as the input CodeGeneratorRequest being
|
|
// unparseable -- should be reported by writing a message to stderr and
|
|
// exiting with a non-zero status code.
|
|
Error *string `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
|
|
File []*CodeGeneratorResponse_File `protobuf:"bytes,15,rep,name=file" json:"file,omitempty"`
|
|
XXX_unrecognized []byte `json:"-"`
|
|
}
|
|
|
|
func (m *CodeGeneratorResponse) Reset() { *m = CodeGeneratorResponse{} }
|
|
func (m *CodeGeneratorResponse) String() string { return proto.CompactTextString(m) }
|
|
func (*CodeGeneratorResponse) ProtoMessage() {}
|
|
func (*CodeGeneratorResponse) Descriptor() ([]byte, []int) { return fileDescriptor0, []int{1} }
|
|
|
|
func (m *CodeGeneratorResponse) GetError() string {
|
|
if m != nil && m.Error != nil {
|
|
return *m.Error
|
|
}
|
|
return ""
|
|
}
|
|
|
|
func (m *CodeGeneratorResponse) GetFile() []*CodeGeneratorResponse_File {
|
|
if m != nil {
|
|
return m.File
|
|
}
|
|
return nil
|
|
}
|
|
|
|
// Represents a single generated file.
|
|
type CodeGeneratorResponse_File struct {
|
|
// The file name, relative to the output directory. The name must not
|
|
// contain "." or ".." components and must be relative, not be absolute (so,
|
|
// the file cannot lie outside the output directory). "/" must be used as
|
|
// the path separator, not "\".
|
|
//
|
|
// If the name is omitted, the content will be appended to the previous
|
|
// file. This allows the generator to break large files into small chunks,
|
|
// and allows the generated text to be streamed back to protoc so that large
|
|
// files need not reside completely in memory at one time. Note that as of
|
|
// this writing protoc does not optimize for this -- it will read the entire
|
|
// CodeGeneratorResponse before writing files to disk.
|
|
Name *string `protobuf:"bytes,1,opt,name=name" json:"name,omitempty"`
|
|
// If non-empty, indicates that the named file should already exist, and the
|
|
// content here is to be inserted into that file at a defined insertion
|
|
// point. This feature allows a code generator to extend the output
|
|
// produced by another code generator. The original generator may provide
|
|
// insertion points by placing special annotations in the file that look
|
|
// like:
|
|
// @@protoc_insertion_point(NAME)
|
|
// The annotation can have arbitrary text before and after it on the line,
|
|
// which allows it to be placed in a comment. NAME should be replaced with
|
|
// an identifier naming the point -- this is what other generators will use
|
|
// as the insertion_point. Code inserted at this point will be placed
|
|
// immediately above the line containing the insertion point (thus multiple
|
|
// insertions to the same point will come out in the order they were added).
|
|
// The double-@ is intended to make it unlikely that the generated code
|
|
// could contain things that look like insertion points by accident.
|
|
//
|
|
// For example, the C++ code generator places the following line in the
|
|
// .pb.h files that it generates:
|
|
// // @@protoc_insertion_point(namespace_scope)
|
|
// This line appears within the scope of the file's package namespace, but
|
|
// outside of any particular class. Another plugin can then specify the
|
|
// insertion_point "namespace_scope" to generate additional classes or
|
|
// other declarations that should be placed in this scope.
|
|
//
|
|
// Note that if the line containing the insertion point begins with
|
|
// whitespace, the same whitespace will be added to every line of the
|
|
// inserted text. This is useful for languages like Python, where
|
|
// indentation matters. In these languages, the insertion point comment
|
|
// should be indented the same amount as any inserted code will need to be
|
|
// in order to work correctly in that context.
|
|
//
|
|
// The code generator that generates the initial file and the one which
|
|
// inserts into it must both run as part of a single invocation of protoc.
|
|
// Code generators are executed in the order in which they appear on the
|
|
// command line.
|
|
//
|
|
// If |insertion_point| is present, |name| must also be present.
|
|
InsertionPoint *string `protobuf:"bytes,2,opt,name=insertion_point,json=insertionPoint" json:"insertion_point,omitempty"`
|
|
// The file contents.
|
|
Content *string `protobuf:"bytes,15,opt,name=content" json:"content,omitempty"`
|
|
XXX_unrecognized []byte `json:"-"`
|
|
}
|
|
|
|
func (m *CodeGeneratorResponse_File) Reset() { *m = CodeGeneratorResponse_File{} }
|
|
func (m *CodeGeneratorResponse_File) String() string { return proto.CompactTextString(m) }
|
|
func (*CodeGeneratorResponse_File) ProtoMessage() {}
|
|
func (*CodeGeneratorResponse_File) Descriptor() ([]byte, []int) { return fileDescriptor0, []int{1, 0} }
|
|
|
|
func (m *CodeGeneratorResponse_File) GetName() string {
|
|
if m != nil && m.Name != nil {
|
|
return *m.Name
|
|
}
|
|
return ""
|
|
}
|
|
|
|
func (m *CodeGeneratorResponse_File) GetInsertionPoint() string {
|
|
if m != nil && m.InsertionPoint != nil {
|
|
return *m.InsertionPoint
|
|
}
|
|
return ""
|
|
}
|
|
|
|
func (m *CodeGeneratorResponse_File) GetContent() string {
|
|
if m != nil && m.Content != nil {
|
|
return *m.Content
|
|
}
|
|
return ""
|
|
}
|
|
|
|
func init() {
|
|
proto.RegisterType((*CodeGeneratorRequest)(nil), "google.protobuf.compiler.CodeGeneratorRequest")
|
|
proto.RegisterType((*CodeGeneratorResponse)(nil), "google.protobuf.compiler.CodeGeneratorResponse")
|
|
proto.RegisterType((*CodeGeneratorResponse_File)(nil), "google.protobuf.compiler.CodeGeneratorResponse.File")
|
|
}
|
|
|
|
var fileDescriptor0 = []byte{
|
|
// 311 bytes of a gzipped FileDescriptorProto
|
|
0x1f, 0x8b, 0x08, 0x00, 0x00, 0x09, 0x6e, 0x88, 0x02, 0xff, 0x74, 0x91, 0xd1, 0x4a, 0xfb, 0x30,
|
|
0x14, 0xc6, 0xe9, 0xff, 0x3f, 0x91, 0x1d, 0x65, 0x93, 0x30, 0xa1, 0x8c, 0x5d, 0x94, 0xa1, 0xb8,
|
|
0xab, 0x14, 0x44, 0xf0, 0x7e, 0x13, 0xf5, 0xb2, 0x14, 0xaf, 0x04, 0x29, 0xb5, 0x3b, 0x2b, 0x81,
|
|
0x2e, 0x27, 0xa6, 0xe9, 0x13, 0xf9, 0x4e, 0x3e, 0x8f, 0x49, 0xda, 0x4e, 0x29, 0xee, 0xaa, 0x3d,
|
|
0xdf, 0xf9, 0xe5, 0x3b, 0x5f, 0x72, 0xe0, 0xba, 0x24, 0x2a, 0x2b, 0x8c, 0x95, 0x26, 0x43, 0xef,
|
|
0xcd, 0x2e, 0x2e, 0x68, 0xaf, 0x44, 0x85, 0x3a, 0x56, 0x55, 0x53, 0x0a, 0xc9, 0x7d, 0x83, 0x85,
|
|
0x2d, 0xc6, 0x7b, 0x8c, 0xf7, 0xd8, 0x3c, 0x1a, 0x1a, 0x6c, 0xb1, 0x2e, 0xb4, 0x50, 0x86, 0x74,
|
|
0x4b, 0x2f, 0x3f, 0x03, 0x98, 0x6d, 0x68, 0x8b, 0x4f, 0x28, 0x51, 0xe7, 0x56, 0x4f, 0xf1, 0xa3,
|
|
0xc1, 0xda, 0xb0, 0x15, 0x5c, 0xec, 0xac, 0x47, 0x66, 0x28, 0x2b, 0xdb, 0x1e, 0x86, 0x41, 0xf4,
|
|
0x7f, 0x35, 0x4e, 0x27, 0x4e, 0x7f, 0xa1, 0xee, 0x04, 0xb2, 0x05, 0x8c, 0x55, 0xae, 0xf3, 0x3d,
|
|
0x1a, 0xd4, 0xe1, 0xbf, 0x28, 0xb0, 0xc8, 0x8f, 0xc0, 0x36, 0x00, 0x7e, 0x52, 0xe6, 0x4e, 0x85,
|
|
0x53, 0xeb, 0x70, 0x76, 0x7b, 0xc5, 0x87, 0x89, 0x1f, 0x6d, 0xf3, 0xe1, 0x90, 0x2d, 0x71, 0xb2,
|
|
0x35, 0x71, 0x1f, 0xd7, 0x59, 0x7e, 0x05, 0x70, 0x39, 0x48, 0x59, 0x2b, 0x92, 0x35, 0xb2, 0x19,
|
|
0x9c, 0xa0, 0xd6, 0xa4, 0x6d, 0x36, 0x37, 0xb8, 0x2d, 0xd8, 0x33, 0x8c, 0x7e, 0x8d, 0xbb, 0xe3,
|
|
0xc7, 0x1e, 0x88, 0xff, 0x69, 0xea, 0xd3, 0xa4, 0xde, 0x61, 0xfe, 0x06, 0x23, 0x57, 0x31, 0x06,
|
|
0x23, 0x69, 0x6f, 0xd4, 0x8d, 0xf1, 0xff, 0xec, 0x06, 0xa6, 0xc2, 0xe2, 0xda, 0x08, 0x92, 0x99,
|
|
0x22, 0x21, 0x4d, 0x77, 0xfd, 0xc9, 0x41, 0x4e, 0x9c, 0xca, 0x42, 0x38, 0x2d, 0x48, 0x1a, 0xb4,
|
|
0xc0, 0xd4, 0x03, 0x7d, 0xb9, 0xbe, 0x87, 0x85, 0xcd, 0x72, 0x34, 0xdf, 0xfa, 0x3c, 0xf1, 0x8b,
|
|
0xf6, 0x0f, 0x52, 0xbf, 0x8e, 0xdb, 0xb5, 0x67, 0x25, 0x7d, 0x07, 0x00, 0x00, 0xff, 0xff, 0x83,
|
|
0x7b, 0x5c, 0x7c, 0x1b, 0x02, 0x00, 0x00,
|
|
}
|