The LDAP connector allows email/password based authentication, backed by a LDAP directory.
The connector executes two primary queries:
1. Finding the user based on the end user's credentials.
2. Searching for groups using the user entry.
## Getting started
The dex repo contains a basic LDAP setup using [OpenLDAP][openldap].
First start the LDAP server using the example script. This will run the OpenLDAP daemon and seed it with a initial set of users.
```
./scripts/slapd.sh
```
This script sets the LDAP daemon to debug mode, and is expected to print several error messages which are normal. Once the server is up, run dex.
```
./bin/dex serve examples/config-ldap.yaml
```
Then run the OAuth client in another terminal.
```
./bin/example-app
```
Go to [http://localhost:5555](http://localhost:5555), login and enter the username and password of the LDAP user: `janedoe@example.com`/`foo`. Add the "groups" scope as part of the initial redirect to add group information from the LDAP server.
## Security considerations
Dex attempts to bind with the backing LDAP server using the end user's _plain text password_. Though some LDAP implementations allow passing hashed passwords, dex doesn't support hashing and instead _strongly recommends that all administrators just use TLS_. This can often be achieved by using port 636 instead of 389, and administrators that choose 389 are actively leaking passwords.
Dex currently allows insecure connections because the project is still verifying that dex works with the wide variety of LDAP implementations. However, dex may remove this transport option, and _users who configure LDAP login using 389 are not covered by any compatibility guarantees with future releases._
## Configuration
User entries are expected to have an email attribute (configurable through `emailAttr`), and a display name attribute (configurable through `nameAttr`). `*Attr` attributes could be set to "DN" in situations where it is needed but not available elsewhere, and if "DN" attribute does not exist in the record.
# The attribute to display in the provided password prompt. If unset, will
# display "Username"
usernamePrompt: SSO Username
# User search maps a username and password entered by a user to a LDAP entry.
userSearch:
# BaseDN to start the search from. It will translate to the query
# "(&(objectClass=person)(uid=<username>))".
baseDN: cn=users,dc=example,dc=com
# Optional filter to apply when searching the directory.
filter: "(objectClass=person)"
# username attribute used for comparing user entries. This will be translated
# and combined with the other filter as "(<attr>=<username>)".
username: uid
# The following three fields are direct mappings of attributes on the user entry.
# String representation of the user.
idAttr: uid
# Required. Attribute to map to Email.
emailAttr: mail
# Maps to display name of users. No default value.
nameAttr: name
# Group search queries for groups given a user entry.
groupSearch:
# BaseDN to start the search from. It will translate to the query
# "(&(objectClass=group)(member=<useruid>))".
baseDN: cn=groups,dc=freeipa,dc=example,dc=com
# Optional filter to apply when searching the directory.
filter: "(objectClass=group)"
# Following two fields are used to match a user to a group. It adds an additional
# requirement to the filter that an attribute in the group must match the user's
# attribute value.
userAttr: uid
groupAttr: member
# Represents group name.
nameAttr: name
```
The LDAP connector first initializes a connection to the LDAP directory using the `bindDN` and `bindPW`. It then tries to search for the given `username` and bind as that user to verify their password.
Searches that return multiple entries are considered ambiguous and will return an error.
## Example: Mapping a schema to a search config
Writing a search configuration often involves mapping an existing LDAP schema to the various options dex provides. To query an existing LDAP schema install the OpenLDAP tool `ldapsearch`. For `rpm` based distros run:
```
sudo dnf install openldap-clients
```
For `apt-get`:
```
sudo apt-get install ldap-utils
```
For smaller user directories it may be practical to dump the entire contents and search by hand.
```
ldapsearch -x -h ldap.example.org -b 'dc=example,dc=org' | less
```
First, find a user entry. User entries declare users who can login to LDAP connector using username and password.
```
dn: uid=jdoe,cn=users,cn=compat,dc=example,dc=org
cn: Jane Doe
objectClass: posixAccount
objectClass: ipaOverrideTarget
objectClass: top
gidNumber: 200015
gecos: Jane Doe
uidNumber: 200015
loginShell: /bin/bash
homeDirectory: /home/jdoe
mail: jane.doe@example.com
uid: janedoe
```
Compose a user search which returns this user.
```yaml
userSearch:
# The directory directly above the user entry.
baseDN: cn=users,cn=compat,dc=example,dc=org
filter: "(objectClass=posixAccount)"
# Expect user to enter "janedoe" when logging in.
username: uid
# Use the full DN as an ID.
idAttr: DN
# When an email address is not available, use another value unique to the user, like uid.
Group searches must match a user attribute to a group attribute. In this example, the search returns users whose uid is found in the group's list of memberUid attributes.
```yaml
groupSearch:
# The directory directly above the group entry.
baseDN: cn=groups,cn=compat,dc=example,dc=org
filter: "(objectClass=posixGroup)"
# The group search needs to match the "uid" attribute on
# the user with the "memberUid" attribute on the group.
userAttr: uid
groupAttr: memberUid
# Unique name of the group.
nameAttr: cn
```
To extract group specific information the `DN` can be used in the `userAttr` field.
```
# Top level object example.coma in LDIF file.
dn: dc=example,dc=com
objectClass: top
objectClass: dcObject
objectClass: organization
dc: example
```
The following is an example of a group query would match any entry with member=<userDN>:
```yaml
groupSearch:
# BaseDN to start the search from. It will translate to the query
# "(&(objectClass=group)(member=<userDN>))".
baseDN: cn=groups,cn=compat,dc=example,dc=com
# Optional filter to apply when searching the directory.
filter: "(objectClass=group)"
userAttr: DN # Use "DN" here not "uid"
groupAttr: member
nameAttr: name
```
## Example: Searching a FreeIPA server with groups
The following configuration will allow the LDAP connector to search a FreeIPA directory using an LDAP filter.
```yaml
connectors:
- type: ldap
id: ldap
name: LDAP
config:
# host and port of the LDAP server in form "host:port".
