Software configuration and testing
First things first
- You need to adjust Spider serial (line 17 in printer.cfg) to match yours.
- The configuration is preset for 350mm, go trough the configuration and adjust it in positions where you see 250mm or 300mm variants if you have different size kit.
- Before heating the bed for first time, make sure it is only tightened in one corner (preferably the one next to the z-endstop sensor). If you need to do any adjustments with wires afterwards but before you have finished with bed make sure to temporarily tighten the bed down for that procedure.
- Depending on you going with Fluidd or Mainsail way, only upload configs from respectable folders.