improvements to manual
This commit is contained in:
Sander Soots
@@ -386,7 +386,7 @@ off_below: 0.10
|
|||||||
[heater_fan controller_fan]
|
[heater_fan controller_fan]
|
||||||
## Exhaust fan - In E2 OUT Positon
|
## Exhaust fan - In E2 OUT Positon
|
||||||
pin: PB3
|
pin: PB3
|
||||||
max_power: 0.5
|
max_power: 1
|
||||||
shutdown_speed: 0.0
|
shutdown_speed: 0.0
|
||||||
kick_start_time: 5.0
|
kick_start_time: 5.0
|
||||||
heater: heater_bed
|
heater: heater_bed
|
||||||
|
|||||||
@@ -29,7 +29,7 @@
|
|||||||
[mcu]
|
[mcu]
|
||||||
## Obtain definition by "ls -l /dev/serial/by-id/"
|
## Obtain definition by "ls -l /dev/serial/by-id/"
|
||||||
##--------------------------------------------------------------------
|
##--------------------------------------------------------------------
|
||||||
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_2B002A001151383039343538-if00
|
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_3E0019000F51383039343538-if00
|
||||||
|
|
||||||
## Uncomment below if you're using the Raspberry uart0 to communicate with Spider
|
## Uncomment below if you're using the Raspberry uart0 to communicate with Spider
|
||||||
#restart_method: command
|
#restart_method: command
|
||||||
@@ -386,7 +386,7 @@ off_below: 0.10
|
|||||||
[heater_fan controller_fan]
|
[heater_fan controller_fan]
|
||||||
## Exhaust fan - In E2 OUT Positon
|
## Exhaust fan - In E2 OUT Positon
|
||||||
pin: PB3
|
pin: PB3
|
||||||
max_power: 0.5
|
max_power: 1
|
||||||
shutdown_speed: 0.0
|
shutdown_speed: 0.0
|
||||||
kick_start_time: 5.0
|
kick_start_time: 5.0
|
||||||
heater: heater_bed
|
heater: heater_bed
|
||||||
|
|||||||
460
Manuals/Slicer/Decorative_45_Degree.ini
Normal file
460
Manuals/Slicer/Decorative_45_Degree.ini
Normal file
@@ -0,0 +1,460 @@
|
|||||||
|
# generated by SuperSlicer 2.4 on 2022-08-16 at 18:33:45 UTC
|
||||||
|
allow_empty_layers = 0
|
||||||
|
avoid_crossing_not_first_layer = 1
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
avoid_crossing_perimeters_max_detour = 0
|
||||||
|
bed_custom_model = G:\\My Drive\\3D Printing\\Slicer_Beds\\voron2_350bed.stl
|
||||||
|
bed_custom_texture = G:\\My Drive\\3D Printing\\Slicer_Beds\\V2_bed_smooth_pei.png
|
||||||
|
bed_shape = 0x0,350x0,350x350,0x350
|
||||||
|
bed_temperature = 110
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
bottom_fill_pattern = monotonicgapfill
|
||||||
|
bottom_solid_layers = 5
|
||||||
|
bottom_solid_min_thickness = 1
|
||||||
|
bridge_acceleration = 5000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_fan_speed = -1
|
||||||
|
bridge_flow_ratio = 85%
|
||||||
|
bridge_internal_acceleration = 5000
|
||||||
|
bridge_internal_fan_speed = -1
|
||||||
|
bridge_overlap = 50%
|
||||||
|
bridge_overlap_min = 50%
|
||||||
|
bridge_speed = 140
|
||||||
|
bridge_speed_internal = 100%
|
||||||
|
bridge_type = nozzle
|
||||||
|
bridged_infill_margin = 200%
|
||||||
|
brim_acceleration = 5000
|
||||||
|
brim_ears = 0
|
||||||
|
brim_ears_detection_length = 1
|
||||||
|
brim_ears_max_angle = 120
|
||||||
|
brim_ears_pattern = concentric
|
||||||
|
brim_inside_holes = 0
|
||||||
|
brim_separation = 0
|
||||||
|
brim_speed = 50%
|
||||||
|
brim_width = 0
|
||||||
|
brim_width_interior = 0
|
||||||
|
chamber_temperature = 50
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
color_change_gcode = M600
|
||||||
|
colorprint_heights =
|
||||||
|
complete_objects = 0
|
||||||
|
complete_objects_one_brim = 0
|
||||||
|
complete_objects_one_skirt = 0
|
||||||
|
complete_objects_sort = object
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
curve_smoothing_angle_concave = 0
|
||||||
|
curve_smoothing_angle_convex = 0
|
||||||
|
curve_smoothing_cutoff_dist = 2
|
||||||
|
curve_smoothing_precision = 0
|
||||||
|
default_acceleration = 4000
|
||||||
|
default_filament_profile = ""
|
||||||
|
default_print_profile =
|
||||||
|
default_speed = 100
|
||||||
|
deretract_speed = 30
|
||||||
|
disable_fan_first_layers = 1
|
||||||
|
dont_support_bridges = 1
|
||||||
|
draft_shield = disabled
|
||||||
|
duplicate_distance = 6
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
end_gcode = PRINT_END
|
||||||
|
enforce_full_fill_volume = 1
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
exact_last_layer_height = 0
|
||||||
|
external_infill_margin = 150%
|
||||||
|
external_perimeter_acceleration = 1000
|
||||||
|
external_perimeter_cut_corners = 0%
|
||||||
|
external_perimeter_extrusion_spacing =
|
||||||
|
external_perimeter_extrusion_width = 0
|
||||||
|
external_perimeter_fan_speed = -1
|
||||||
|
external_perimeter_overlap = 100%
|
||||||
|
external_perimeter_speed = 80
|
||||||
|
external_perimeters_first = 0
|
||||||
|
external_perimeters_hole = 1
|
||||||
|
external_perimeters_nothole = 1
|
||||||
|
external_perimeters_vase = 0
|
||||||
|
extra_loading_move = -2
|
||||||
|
extra_perimeters = 0
|
||||||
|
extra_perimeters_odd_layers = 0
|
||||||
|
extra_perimeters_overhangs = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_fan_offset = 0%
|
||||||
|
extruder_offset = 0x0
|
||||||
|
extruder_temperature_offset = 0
|
||||||
|
extrusion_axis = E
|
||||||
|
extrusion_multiplier = 0.924
|
||||||
|
extrusion_spacing =
|
||||||
|
extrusion_width = 125%
|
||||||
|
fan_always_on = 1
|
||||||
|
fan_below_layer_time = 0
|
||||||
|
fan_kickstart = 0
|
||||||
|
fan_percentage = 0
|
||||||
|
fan_speedup_overhangs = 1
|
||||||
|
fan_speedup_time = 1
|
||||||
|
feature_gcode =
|
||||||
|
filament_colour = #707070
|
||||||
|
filament_cooling_final_speed = 3.4
|
||||||
|
filament_cooling_initial_speed = 2.2
|
||||||
|
filament_cooling_moves = 4
|
||||||
|
filament_cooling_zone_pause = 0
|
||||||
|
filament_cost = 22
|
||||||
|
filament_custom_variables = ""
|
||||||
|
filament_density = 1.03
|
||||||
|
filament_deretract_speed = nil
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_dip_extraction_speed = 70
|
||||||
|
filament_dip_insertion_speed = 33
|
||||||
|
filament_enable_toolchange_part_fan = 0
|
||||||
|
filament_enable_toolchange_temp = 0
|
||||||
|
filament_load_time = 0
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_loading_speed_start = 3
|
||||||
|
filament_max_overlap = 100%
|
||||||
|
filament_max_speed = 0
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_max_wipe_tower_speed = 0
|
||||||
|
filament_melt_zone_pause = 0
|
||||||
|
filament_minimal_purge_on_wipe_tower = 15
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_retract_before_travel = nil
|
||||||
|
filament_retract_before_wipe = nil
|
||||||
|
filament_retract_layer_change = nil
|
||||||
|
filament_retract_length = nil
|
||||||
|
filament_retract_lift = nil
|
||||||
|
filament_retract_lift_above = nil
|
||||||
|
filament_retract_lift_below = nil
|
||||||
|
filament_retract_restart_extra = nil
|
||||||
|
filament_retract_speed = nil
|
||||||
|
filament_seam_gap = nil
|
||||||
|
filament_settings_id = "ABS - KVP"
|
||||||
|
filament_shrink = 100%
|
||||||
|
filament_skinnydip_distance = 31
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_spool_weight = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_toolchange_part_fan_speed = 50
|
||||||
|
filament_toolchange_temp = 200
|
||||||
|
filament_type = ABS
|
||||||
|
filament_unload_time = 0
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
filament_unloading_speed_start = 100
|
||||||
|
filament_use_fast_skinnydip = 0
|
||||||
|
filament_use_skinnydip = 0
|
||||||
|
filament_vendor = (Unknown)
|
||||||
|
filament_wipe = nil
|
||||||
|
filament_wipe_advanced_pigment = 0.5
|
||||||
|
filament_wipe_extra_perimeter = nil
|
||||||
|
filament_wipe_only_crossing = nil
|
||||||
|
filament_wipe_speed = nil
|
||||||
|
fill_angle = 0
|
||||||
|
fill_angle_increment = 0
|
||||||
|
fill_density = 20%
|
||||||
|
fill_pattern = supportcubic
|
||||||
|
fill_smooth_distribution = 10%
|
||||||
|
fill_smooth_width = 50%
|
||||||
|
fill_top_flow_ratio = 100%
|
||||||
|
first_layer_acceleration = 2000
|
||||||
|
first_layer_acceleration_over_raft = 0
|
||||||
|
first_layer_bed_temperature = 110
|
||||||
|
first_layer_extrusion_spacing =
|
||||||
|
first_layer_extrusion_width = 0
|
||||||
|
first_layer_flow_ratio = 100%
|
||||||
|
first_layer_height = 0.25
|
||||||
|
first_layer_infill_speed = 60
|
||||||
|
first_layer_min_speed = 0
|
||||||
|
first_layer_size_compensation = -0.1
|
||||||
|
first_layer_size_compensation_layers = 3
|
||||||
|
first_layer_speed = 30
|
||||||
|
first_layer_speed_over_raft = 30
|
||||||
|
first_layer_temperature = 245
|
||||||
|
full_fan_speed_layer = 0
|
||||||
|
fuzzy_skin = none
|
||||||
|
fuzzy_skin_point_dist = 200%
|
||||||
|
fuzzy_skin_thickness = 150%
|
||||||
|
gap_fill_acceleration = 2000
|
||||||
|
gap_fill_enabled = 1
|
||||||
|
gap_fill_last = 1
|
||||||
|
gap_fill_min_area = 50%
|
||||||
|
gap_fill_overlap = 100%
|
||||||
|
gap_fill_speed = 30
|
||||||
|
gcode_comments = 0
|
||||||
|
gcode_filename_illegal_char = [<>:"/\\\\|?*]
|
||||||
|
gcode_flavor = klipper
|
||||||
|
gcode_label_objects = 1
|
||||||
|
gcode_precision_e = 5
|
||||||
|
gcode_precision_xyz = 3
|
||||||
|
gcode_resolution = 0
|
||||||
|
gcode_substitutions =
|
||||||
|
high_current_on_filament_swap = 0
|
||||||
|
hole_size_compensation = 0
|
||||||
|
hole_size_threshold = 100
|
||||||
|
hole_to_polyhole = 0
|
||||||
|
hole_to_polyhole_threshold = 0.01
|
||||||
|
hole_to_polyhole_twisted = 1
|
||||||
|
host_type = octoprint
|
||||||
|
infill_acceleration = 7000
|
||||||
|
infill_anchor = 600%
|
||||||
|
infill_anchor_max = 0
|
||||||
|
infill_connection = connected
|
||||||
|
infill_connection_bottom = connected
|
||||||
|
infill_connection_solid = connected
|
||||||
|
infill_connection_top = connected
|
||||||
|
infill_dense = 0
|
||||||
|
infill_dense_algo = autoenlarged
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_spacing =
|
||||||
|
infill_extrusion_width = 0
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 40%
|
||||||
|
infill_speed = 300
|
||||||
|
init_z_rotate = 45
|
||||||
|
interface_shells = 0
|
||||||
|
ironing = 0
|
||||||
|
ironing_acceleration = 2000
|
||||||
|
ironing_angle = -1
|
||||||
|
ironing_flowrate = 15%
|
||||||
|
ironing_spacing = 0.1
|
||||||
|
ironing_speed = 15
|
||||||
|
ironing_type = top
|
||||||
|
layer_gcode =
|
||||||
|
layer_height = 0.2
|
||||||
|
lift_min = 0
|
||||||
|
machine_limits_usage = time_estimate_only
|
||||||
|
machine_max_acceleration_e = 10000,5000
|
||||||
|
machine_max_acceleration_extruding = 10000,1250
|
||||||
|
machine_max_acceleration_retracting = 1500,1250
|
||||||
|
machine_max_acceleration_travel = 10000,1250
|
||||||
|
machine_max_acceleration_x = 10000,1000
|
||||||
|
machine_max_acceleration_y = 10000,1000
|
||||||
|
machine_max_acceleration_z = 300,200
|
||||||
|
machine_max_feedrate_e = 120,120
|
||||||
|
machine_max_feedrate_x = 450,200
|
||||||
|
machine_max_feedrate_y = 450,200
|
||||||
|
machine_max_feedrate_z = 30,12
|
||||||
|
machine_max_jerk_e = 2.5,2.5
|
||||||
|
machine_max_jerk_x = 10,10
|
||||||
|
machine_max_jerk_y = 10,10
|
||||||
|
machine_max_jerk_z = 0.2,0.4
|
||||||
|
machine_min_extruding_rate = 0,0
|
||||||
|
machine_min_travel_rate = 0,0
|
||||||
|
max_fan_speed = 100
|
||||||
|
max_gcode_per_second = 1500
|
||||||
|
max_layer_height = 75%
|
||||||
|
max_print_height = 320
|
||||||
|
max_print_speed = 300
|
||||||
|
max_speed_reduction = 90%
|
||||||
|
max_volumetric_speed = 24
|
||||||
|
milling_after_z = 200%
|
||||||
|
milling_diameter =
|
||||||
|
milling_extra_size = 150%
|
||||||
|
milling_post_process = 0
|
||||||
|
milling_speed = 30
|
||||||
|
milling_toolchange_end_gcode =
|
||||||
|
milling_toolchange_start_gcode =
|
||||||
|
milling_z_lift =
|
||||||
|
min_fan_speed = 50
|
||||||
|
min_layer_height = 0.08
|
||||||
|
min_length = 0
|
||||||
|
min_print_speed = 10
|
||||||
|
min_skirt_length = 20
|
||||||
|
min_width_top_surface = 200%
|
||||||
|
mmu_segmented_region_max_width = 0
|
||||||
|
model_precision = 0.0001
|
||||||
|
no_perimeter_unsupported_algo = none
|
||||||
|
notes =
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
only_one_perimeter_first_layer = 0
|
||||||
|
only_one_perimeter_top = 1
|
||||||
|
only_one_perimeter_top_other_algo = 0
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
|
||||||
|
over_bridge_flow_ratio = 100%
|
||||||
|
overhangs_acceleration = 2000
|
||||||
|
overhangs_reverse = 0
|
||||||
|
overhangs_reverse_threshold = 250%
|
||||||
|
overhangs_speed = 100%
|
||||||
|
overhangs_width = 75%
|
||||||
|
overhangs_width_speed = 0
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
pause_print_gcode = PAUSE
|
||||||
|
perimeter_acceleration = 2000
|
||||||
|
perimeter_bonding = 0%
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_spacing =
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_loop = 0
|
||||||
|
perimeter_loop_seam = rear
|
||||||
|
perimeter_overlap = 100%
|
||||||
|
perimeter_round_corners = 0
|
||||||
|
perimeter_speed = 150
|
||||||
|
perimeters = 3
|
||||||
|
physical_printer_settings_id = V2.247
|
||||||
|
post_process =
|
||||||
|
print_custom_variables =
|
||||||
|
print_extrusion_multiplier = 100%
|
||||||
|
print_host =
|
||||||
|
print_retract_length = -1
|
||||||
|
print_retract_lift = -1
|
||||||
|
print_settings_id = .Voron HF - Decorative 45
|
||||||
|
print_temperature = 0
|
||||||
|
printer_custom_variables =
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id = Voron HF 0.4mm (45 Degree)
|
||||||
|
printer_technology = FFF
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
printhost_apikey =
|
||||||
|
printhost_cafile =
|
||||||
|
printhost_port =
|
||||||
|
raft_contact_distance = 0.1
|
||||||
|
raft_expansion = 1.5
|
||||||
|
raft_first_layer_density = 90%
|
||||||
|
raft_first_layer_expansion = 3
|
||||||
|
raft_layers = 0
|
||||||
|
remaining_times = 1
|
||||||
|
remaining_times_type = m73
|
||||||
|
resolution = 0.0125
|
||||||
|
resolution_internal = 0.2
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.5
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.2
|
||||||
|
retract_lift_above = 0.25
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_lift_first_layer = 0
|
||||||
|
retract_lift_top = "All surfaces"
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 30
|
||||||
|
seam_angle_cost = 100%
|
||||||
|
seam_gap = 0
|
||||||
|
seam_position = rear
|
||||||
|
seam_travel_cost = 0%
|
||||||
|
silent_mode = 0
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
single_extruder_multi_material_priming = 1
|
||||||
|
skirt_brim = 0
|
||||||
|
skirt_distance = 3
|
||||||
|
skirt_distance_from_brim = 1
|
||||||
|
skirt_extrusion_width = 0
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 0
|
||||||
|
slice_closing_radius = 0.049
|
||||||
|
slicing_mode = regular
|
||||||
|
slowdown_below_layer_time = 15
|
||||||
|
small_perimeter_max_length = 20
|
||||||
|
small_perimeter_min_length = 6
|
||||||
|
small_perimeter_speed = 30
|
||||||
|
solid_fill_pattern = monotonic
|
||||||
|
solid_infill_acceleration = 5000
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_spacing =
|
||||||
|
solid_infill_extrusion_width = 140%
|
||||||
|
solid_infill_overlap = 100%
|
||||||
|
solid_infill_speed = 200
|
||||||
|
solid_over_perimeters = 0
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
|
||||||
|
start_gcode_manual = 0
|
||||||
|
support_material = 1
|
||||||
|
support_material_acceleration = 5000
|
||||||
|
support_material_angle = 45
|
||||||
|
support_material_auto = 1
|
||||||
|
support_material_bottom_contact_distance = 0
|
||||||
|
support_material_bottom_interface_layers = -1
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_closing_radius = 2
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_contact_distance_type = filament
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_acceleration = 5000
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 3
|
||||||
|
support_material_interface_pattern = rectilinear
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 3
|
||||||
|
support_material_speed = 120
|
||||||
|
support_material_style = grid
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 30
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 75%
|
||||||
|
temperature = 245
|
||||||
|
template_custom_gcode =
|
||||||
|
thin_perimeters = 80%
|
||||||
|
thin_perimeters_all = 20%
|
||||||
|
thin_walls = 1
|
||||||
|
thin_walls_acceleration = 2000
|
||||||
|
thin_walls_merge = 1
|
||||||
|
thin_walls_min_width = 33%
|
||||||
|
thin_walls_overlap = 50%
|
||||||
|
thin_walls_speed = 80
|
||||||
|
threads = 16
|
||||||
|
thumbnails = 32x32,400x300
|
||||||
|
thumbnails_color = #00FF00
|
||||||
|
thumbnails_custom_color = 1
|
||||||
|
thumbnails_end_file = 0
|
||||||
|
thumbnails_format = PNG
|
||||||
|
thumbnails_with_bed = 1
|
||||||
|
time_estimation_compensation = 100%
|
||||||
|
tool_name = ""
|
||||||
|
toolchange_gcode =
|
||||||
|
top_fan_speed = -1
|
||||||
|
top_fill_pattern = monotonicgapfill
|
||||||
|
top_infill_extrusion_spacing =
|
||||||
|
top_infill_extrusion_width = 100%
|
||||||
|
top_solid_infill_acceleration = 2000
|
||||||
|
top_solid_infill_speed = 60
|
||||||
|
top_solid_layers = 5
|
||||||
|
top_solid_min_thickness = 1
|
||||||
|
travel_acceleration = 10000
|
||||||
|
travel_deceleration_use_target = 1
|
||||||
|
travel_speed = 450
|
||||||
|
travel_speed_z = 0
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
wipe_advanced = 0
|
||||||
|
wipe_advanced_algo = linear
|
||||||
|
wipe_advanced_multiplier = 60
|
||||||
|
wipe_advanced_nozzle_melted_volume = 120
|
||||||
|
wipe_extra_perimeter = 0
|
||||||
|
wipe_into_infill = 0
|
||||||
|
wipe_into_objects = 0
|
||||||
|
wipe_only_crossing = 1
|
||||||
|
wipe_speed = 0
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_brim_width = 2
|
||||||
|
wipe_tower_no_sparse_layers = 0
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
wiping_volumes_extruders = 70,70
|
||||||
|
wiping_volumes_matrix = 0
|
||||||
|
xy_inner_size_compensation = 0
|
||||||
|
xy_size_compensation = 0
|
||||||
|
z_offset = 0
|
||||||
|
z_step = 0.04
|
||||||
@@ -1,234 +0,0 @@
|
|||||||
# generated by PrusaSlicer 2.1.0-rc+win64 on 2020-01-08 at 05:33:09
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
bed_custom_model =
|
|
||||||
bed_custom_texture =
|
|
||||||
bed_shape = 0x0,250x0,250x250,0x250
|
|
||||||
bed_temperature = 105
|
|
||||||
before_layer_gcode =
|
|
||||||
between_objects_gcode =
|
|
||||||
bottom_fill_pattern = rectilinear
|
|
||||||
bottom_solid_layers = 5
|
|
||||||
bridge_acceleration = 3000
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_fan_speed = 15
|
|
||||||
bridge_flow_ratio = 0.8
|
|
||||||
bridge_speed = 60
|
|
||||||
brim_width = 0
|
|
||||||
clip_multipart_objects = 0
|
|
||||||
colorprint_heights =
|
|
||||||
complete_objects = 0
|
|
||||||
cooling = 1
|
|
||||||
cooling_tube_length = 5
|
|
||||||
cooling_tube_retraction = 91.5
|
|
||||||
default_acceleration = 3000
|
|
||||||
default_filament_profile =
|
|
||||||
default_print_profile =
|
|
||||||
deretract_speed = 30
|
|
||||||
disable_fan_first_layers = 5
|
|
||||||
dont_support_bridges = 1
|
|
||||||
duplicate_distance = 6
|
|
||||||
elefant_foot_compensation = 0
|
|
||||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
||||||
end_gcode = print_end ;end script from macro
|
|
||||||
ensure_vertical_shell_thickness = 1
|
|
||||||
external_perimeter_extrusion_width = 0.38
|
|
||||||
external_perimeter_speed = 40
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_loading_move = -2
|
|
||||||
extra_perimeters = 1
|
|
||||||
extruder_clearance_height = 20
|
|
||||||
extruder_clearance_radius = 20
|
|
||||||
extruder_colour = ""
|
|
||||||
extruder_offset = 0x0
|
|
||||||
extrusion_axis = E
|
|
||||||
extrusion_multiplier = 0.9
|
|
||||||
extrusion_width = 0.4
|
|
||||||
fan_always_on = 1
|
|
||||||
fan_below_layer_time = 45
|
|
||||||
filament_colour = #FFFF00
|
|
||||||
filament_cooling_final_speed = 3.4
|
|
||||||
filament_cooling_initial_speed = 2.2
|
|
||||||
filament_cooling_moves = 4
|
|
||||||
filament_cost = 22
|
|
||||||
filament_density = 1.05
|
|
||||||
filament_deretract_speed = nil
|
|
||||||
filament_diameter = 1.75
|
|
||||||
filament_load_time = 0
|
|
||||||
filament_loading_speed = 28
|
|
||||||
filament_loading_speed_start = 3
|
|
||||||
filament_max_volumetric_speed = 11
|
|
||||||
filament_minimal_purge_on_wipe_tower = 5
|
|
||||||
filament_notes = ""
|
|
||||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
||||||
filament_retract_before_travel = nil
|
|
||||||
filament_retract_before_wipe = nil
|
|
||||||
filament_retract_layer_change = nil
|
|
||||||
filament_retract_length = nil
|
|
||||||
filament_retract_lift = nil
|
|
||||||
filament_retract_lift_above = nil
|
|
||||||
filament_retract_lift_below = nil
|
|
||||||
filament_retract_restart_extra = nil
|
|
||||||
filament_retract_speed = nil
|
|
||||||
filament_settings_id = "KVP ABS"
|
|
||||||
filament_soluble = 0
|
|
||||||
filament_toolchange_delay = 0
|
|
||||||
filament_type = ABS
|
|
||||||
filament_unload_time = 0
|
|
||||||
filament_unloading_speed = 90
|
|
||||||
filament_unloading_speed_start = 100
|
|
||||||
filament_wipe = nil
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 40%
|
|
||||||
fill_pattern = grid
|
|
||||||
first_layer_acceleration = 2000
|
|
||||||
first_layer_bed_temperature = 110
|
|
||||||
first_layer_extrusion_width = 0.4
|
|
||||||
first_layer_height = 0.24
|
|
||||||
first_layer_speed = 25
|
|
||||||
first_layer_temperature = 240
|
|
||||||
gap_fill_speed = 40
|
|
||||||
gcode_comments = 0
|
|
||||||
gcode_flavor = reprap
|
|
||||||
gcode_label_objects = 0
|
|
||||||
high_current_on_filament_swap = 0
|
|
||||||
host_type = octoprint
|
|
||||||
infill_acceleration = 4000
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0.45
|
|
||||||
infill_first = 0
|
|
||||||
infill_only_where_needed = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 120
|
|
||||||
interface_shells = 0
|
|
||||||
layer_gcode =
|
|
||||||
layer_height = 0.2
|
|
||||||
machine_max_acceleration_e = 10000,5000
|
|
||||||
machine_max_acceleration_extruding = 1500,1250
|
|
||||||
machine_max_acceleration_retracting = 1500,1250
|
|
||||||
machine_max_acceleration_x = 9000,1000
|
|
||||||
machine_max_acceleration_y = 9000,1000
|
|
||||||
machine_max_acceleration_z = 500,200
|
|
||||||
machine_max_feedrate_e = 120,120
|
|
||||||
machine_max_feedrate_x = 500,200
|
|
||||||
machine_max_feedrate_y = 500,200
|
|
||||||
machine_max_feedrate_z = 12,12
|
|
||||||
machine_max_jerk_e = 2.5,2.5
|
|
||||||
machine_max_jerk_x = 10,10
|
|
||||||
machine_max_jerk_y = 10,10
|
|
||||||
machine_max_jerk_z = 0.2,0.4
|
|
||||||
machine_min_extruding_rate = 0,0
|
|
||||||
machine_min_travel_rate = 0,0
|
|
||||||
max_fan_speed = 30
|
|
||||||
max_layer_height = 0.3
|
|
||||||
max_print_height = 180
|
|
||||||
max_print_speed = 300
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_fan_speed = 15
|
|
||||||
min_layer_height = 0.07
|
|
||||||
min_print_speed = 10
|
|
||||||
min_skirt_length = 20
|
|
||||||
notes =
|
|
||||||
nozzle_diameter = 0.4
|
|
||||||
only_retract_when_crossing_perimeters = 1
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = KVP [input_filename_base]-[total_weight]g-[print_time].gcode
|
|
||||||
overhangs = 1
|
|
||||||
parking_pos_retraction = 92
|
|
||||||
perimeter_acceleration = 2000
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0.38
|
|
||||||
perimeter_speed = 80
|
|
||||||
perimeters = 4
|
|
||||||
post_process =
|
|
||||||
print_host =
|
|
||||||
print_settings_id = KVP ABS PIF
|
|
||||||
printer_model =
|
|
||||||
printer_notes =
|
|
||||||
printer_settings_id = 250mm3 0.4mm ABS AB
|
|
||||||
printer_technology = FFF
|
|
||||||
printer_variant =
|
|
||||||
printer_vendor =
|
|
||||||
printhost_apikey =
|
|
||||||
printhost_cafile =
|
|
||||||
raft_layers = 0
|
|
||||||
remaining_times = 0
|
|
||||||
resolution = 0
|
|
||||||
retract_before_travel = 3
|
|
||||||
retract_before_wipe = 0%
|
|
||||||
retract_layer_change = 0
|
|
||||||
retract_length = 0.75
|
|
||||||
retract_length_toolchange = 10
|
|
||||||
retract_lift = 0.4
|
|
||||||
retract_lift_above = 0.3
|
|
||||||
retract_lift_below = 150
|
|
||||||
retract_restart_extra = 0
|
|
||||||
retract_restart_extra_toolchange = 0
|
|
||||||
retract_speed = 50
|
|
||||||
seam_position = aligned
|
|
||||||
serial_port =
|
|
||||||
serial_speed = 250000
|
|
||||||
silent_mode = 1
|
|
||||||
single_extruder_multi_material = 0
|
|
||||||
single_extruder_multi_material_priming = 1
|
|
||||||
skirt_distance = 3
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 3
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slowdown_below_layer_time = 15
|
|
||||||
small_perimeter_speed = 40
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0.45
|
|
||||||
solid_infill_speed = 120
|
|
||||||
spiral_vase = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
start_filament_gcode = ";Filament gcode"
|
|
||||||
start_gcode = print_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_buildplate_only = 1
|
|
||||||
support_material_contact_distance = 0.2
|
|
||||||
support_material_enforce_layers = 2
|
|
||||||
support_material_extruder = 1
|
|
||||||
support_material_extrusion_width = 0
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 1
|
|
||||||
support_material_interface_layers = 3
|
|
||||||
support_material_interface_spacing = 0
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2.5
|
|
||||||
support_material_speed = 40
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 60
|
|
||||||
support_material_with_sheath = 1
|
|
||||||
support_material_xy_spacing = 50%
|
|
||||||
temperature = 235
|
|
||||||
thin_walls = 0
|
|
||||||
threads = 16
|
|
||||||
toolchange_gcode =
|
|
||||||
top_fill_pattern = rectilinear
|
|
||||||
top_infill_extrusion_width = 0.44
|
|
||||||
top_solid_infill_speed = 40
|
|
||||||
top_solid_layers = 5
|
|
||||||
travel_speed = 300
|
|
||||||
use_firmware_retraction = 0
|
|
||||||
use_relative_e_distances = 1
|
|
||||||
use_volumetric_e = 0
|
|
||||||
variable_layer_height = 0
|
|
||||||
wipe = 0
|
|
||||||
wipe_into_infill = 0
|
|
||||||
wipe_into_objects = 0
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 180
|
|
||||||
wipe_tower_y = 140
|
|
||||||
wiping_volumes_extruders = 70,70
|
|
||||||
wiping_volumes_matrix = 0
|
|
||||||
xy_size_compensation = 0
|
|
||||||
z_offset = 0
|
|
||||||
@@ -1,234 +0,0 @@
|
|||||||
# generated by PrusaSlicer 2.1.0-rc+win64 on 2020-01-08 at 05:31:59
|
|
||||||
avoid_crossing_perimeters = 0
|
|
||||||
bed_custom_model =
|
|
||||||
bed_custom_texture =
|
|
||||||
bed_shape = 0x0,320x0,320x320,0x320
|
|
||||||
bed_temperature = 105
|
|
||||||
before_layer_gcode =
|
|
||||||
between_objects_gcode =
|
|
||||||
bottom_fill_pattern = rectilinear
|
|
||||||
bottom_solid_layers = 5
|
|
||||||
bridge_acceleration = 3000
|
|
||||||
bridge_angle = 0
|
|
||||||
bridge_fan_speed = 15
|
|
||||||
bridge_flow_ratio = 0.8
|
|
||||||
bridge_speed = 60
|
|
||||||
brim_width = 0
|
|
||||||
clip_multipart_objects = 0
|
|
||||||
colorprint_heights =
|
|
||||||
complete_objects = 0
|
|
||||||
cooling = 1
|
|
||||||
cooling_tube_length = 5
|
|
||||||
cooling_tube_retraction = 91.5
|
|
||||||
default_acceleration = 3000
|
|
||||||
default_filament_profile =
|
|
||||||
default_print_profile =
|
|
||||||
deretract_speed = 25
|
|
||||||
disable_fan_first_layers = 5
|
|
||||||
dont_support_bridges = 1
|
|
||||||
duplicate_distance = 6
|
|
||||||
elefant_foot_compensation = 0
|
|
||||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
|
||||||
end_gcode = print_end
|
|
||||||
ensure_vertical_shell_thickness = 1
|
|
||||||
external_perimeter_extrusion_width = 0.38
|
|
||||||
external_perimeter_speed = 40
|
|
||||||
external_perimeters_first = 0
|
|
||||||
extra_loading_move = -2
|
|
||||||
extra_perimeters = 1
|
|
||||||
extruder_clearance_height = 20
|
|
||||||
extruder_clearance_radius = 20
|
|
||||||
extruder_colour = ""
|
|
||||||
extruder_offset = 0x0
|
|
||||||
extrusion_axis = E
|
|
||||||
extrusion_multiplier = 0.9
|
|
||||||
extrusion_width = 0.4
|
|
||||||
fan_always_on = 1
|
|
||||||
fan_below_layer_time = 45
|
|
||||||
filament_colour = #FFFF00
|
|
||||||
filament_cooling_final_speed = 3.4
|
|
||||||
filament_cooling_initial_speed = 2.2
|
|
||||||
filament_cooling_moves = 4
|
|
||||||
filament_cost = 22
|
|
||||||
filament_density = 1.05
|
|
||||||
filament_deretract_speed = nil
|
|
||||||
filament_diameter = 1.75
|
|
||||||
filament_load_time = 0
|
|
||||||
filament_loading_speed = 28
|
|
||||||
filament_loading_speed_start = 3
|
|
||||||
filament_max_volumetric_speed = 11
|
|
||||||
filament_minimal_purge_on_wipe_tower = 5
|
|
||||||
filament_notes = ""
|
|
||||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
||||||
filament_retract_before_travel = nil
|
|
||||||
filament_retract_before_wipe = nil
|
|
||||||
filament_retract_layer_change = nil
|
|
||||||
filament_retract_length = nil
|
|
||||||
filament_retract_lift = nil
|
|
||||||
filament_retract_lift_above = nil
|
|
||||||
filament_retract_lift_below = nil
|
|
||||||
filament_retract_restart_extra = nil
|
|
||||||
filament_retract_speed = nil
|
|
||||||
filament_settings_id = "KVP ABS"
|
|
||||||
filament_soluble = 0
|
|
||||||
filament_toolchange_delay = 0
|
|
||||||
filament_type = ABS
|
|
||||||
filament_unload_time = 0
|
|
||||||
filament_unloading_speed = 90
|
|
||||||
filament_unloading_speed_start = 100
|
|
||||||
filament_wipe = nil
|
|
||||||
fill_angle = 45
|
|
||||||
fill_density = 40%
|
|
||||||
fill_pattern = grid
|
|
||||||
first_layer_acceleration = 2000
|
|
||||||
first_layer_bed_temperature = 110
|
|
||||||
first_layer_extrusion_width = 0.4
|
|
||||||
first_layer_height = 0.24
|
|
||||||
first_layer_speed = 25
|
|
||||||
first_layer_temperature = 240
|
|
||||||
gap_fill_speed = 40
|
|
||||||
gcode_comments = 0
|
|
||||||
gcode_flavor = reprap
|
|
||||||
gcode_label_objects = 0
|
|
||||||
high_current_on_filament_swap = 0
|
|
||||||
host_type = octoprint
|
|
||||||
infill_acceleration = 4000
|
|
||||||
infill_every_layers = 1
|
|
||||||
infill_extruder = 1
|
|
||||||
infill_extrusion_width = 0.45
|
|
||||||
infill_first = 0
|
|
||||||
infill_only_where_needed = 0
|
|
||||||
infill_overlap = 25%
|
|
||||||
infill_speed = 120
|
|
||||||
interface_shells = 0
|
|
||||||
layer_gcode = ; pause as layer code\n; {if layer_z ==3.04}M226 ; pause at height for filament swap{endif}\n; {if layer_z ==3.64}M226 ; pause at height for filament swap{endif}
|
|
||||||
layer_height = 0.2
|
|
||||||
machine_max_acceleration_e = 10000,5000
|
|
||||||
machine_max_acceleration_extruding = 1500,1250
|
|
||||||
machine_max_acceleration_retracting = 1500,1250
|
|
||||||
machine_max_acceleration_x = 9000,1000
|
|
||||||
machine_max_acceleration_y = 9000,1000
|
|
||||||
machine_max_acceleration_z = 500,200
|
|
||||||
machine_max_feedrate_e = 120,120
|
|
||||||
machine_max_feedrate_x = 500,200
|
|
||||||
machine_max_feedrate_y = 500,200
|
|
||||||
machine_max_feedrate_z = 12,12
|
|
||||||
machine_max_jerk_e = 2.5,2.5
|
|
||||||
machine_max_jerk_x = 10,10
|
|
||||||
machine_max_jerk_y = 10,10
|
|
||||||
machine_max_jerk_z = 0.2,0.4
|
|
||||||
machine_min_extruding_rate = 0,0
|
|
||||||
machine_min_travel_rate = 0,0
|
|
||||||
max_fan_speed = 30
|
|
||||||
max_layer_height = 0.3
|
|
||||||
max_print_height = 280
|
|
||||||
max_print_speed = 300
|
|
||||||
max_volumetric_speed = 0
|
|
||||||
min_fan_speed = 15
|
|
||||||
min_layer_height = 0.07
|
|
||||||
min_print_speed = 10
|
|
||||||
min_skirt_length = 20
|
|
||||||
notes =
|
|
||||||
nozzle_diameter = 0.4
|
|
||||||
only_retract_when_crossing_perimeters = 1
|
|
||||||
ooze_prevention = 0
|
|
||||||
output_filename_format = KVP [input_filename_base]-[total_weight]g-[print_time].gcode
|
|
||||||
overhangs = 1
|
|
||||||
parking_pos_retraction = 92
|
|
||||||
perimeter_acceleration = 2000
|
|
||||||
perimeter_extruder = 1
|
|
||||||
perimeter_extrusion_width = 0.38
|
|
||||||
perimeter_speed = 80
|
|
||||||
perimeters = 4
|
|
||||||
post_process =
|
|
||||||
print_host =
|
|
||||||
print_settings_id = KVP ABS PIF
|
|
||||||
printer_model =
|
|
||||||
printer_notes =
|
|
||||||
printer_settings_id = V320 V2.1 - 0.4mm Nozzle - ABS
|
|
||||||
printer_technology = FFF
|
|
||||||
printer_variant =
|
|
||||||
printer_vendor =
|
|
||||||
printhost_apikey =
|
|
||||||
printhost_cafile =
|
|
||||||
raft_layers = 0
|
|
||||||
remaining_times = 0
|
|
||||||
resolution = 0
|
|
||||||
retract_before_travel = 3
|
|
||||||
retract_before_wipe = 0%
|
|
||||||
retract_layer_change = 0
|
|
||||||
retract_length = 5.8
|
|
||||||
retract_length_toolchange = 10
|
|
||||||
retract_lift = 0.4
|
|
||||||
retract_lift_above = 0.3
|
|
||||||
retract_lift_below = 0
|
|
||||||
retract_restart_extra = 0
|
|
||||||
retract_restart_extra_toolchange = 0
|
|
||||||
retract_speed = 35
|
|
||||||
seam_position = aligned
|
|
||||||
serial_port =
|
|
||||||
serial_speed = 250000
|
|
||||||
silent_mode = 1
|
|
||||||
single_extruder_multi_material = 0
|
|
||||||
single_extruder_multi_material_priming = 1
|
|
||||||
skirt_distance = 3
|
|
||||||
skirt_height = 1
|
|
||||||
skirts = 3
|
|
||||||
slice_closing_radius = 0.049
|
|
||||||
slowdown_below_layer_time = 15
|
|
||||||
small_perimeter_speed = 40
|
|
||||||
solid_infill_below_area = 0
|
|
||||||
solid_infill_every_layers = 0
|
|
||||||
solid_infill_extruder = 1
|
|
||||||
solid_infill_extrusion_width = 0.45
|
|
||||||
solid_infill_speed = 120
|
|
||||||
spiral_vase = 0
|
|
||||||
standby_temperature_delta = -5
|
|
||||||
start_filament_gcode = ";Filament gcode"
|
|
||||||
start_gcode = print_start EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
|
|
||||||
support_material = 0
|
|
||||||
support_material_angle = 0
|
|
||||||
support_material_auto = 1
|
|
||||||
support_material_buildplate_only = 1
|
|
||||||
support_material_contact_distance = 0.2
|
|
||||||
support_material_enforce_layers = 2
|
|
||||||
support_material_extruder = 1
|
|
||||||
support_material_extrusion_width = 0
|
|
||||||
support_material_interface_contact_loops = 0
|
|
||||||
support_material_interface_extruder = 1
|
|
||||||
support_material_interface_layers = 3
|
|
||||||
support_material_interface_spacing = 0
|
|
||||||
support_material_interface_speed = 100%
|
|
||||||
support_material_pattern = rectilinear
|
|
||||||
support_material_spacing = 2.5
|
|
||||||
support_material_speed = 40
|
|
||||||
support_material_synchronize_layers = 0
|
|
||||||
support_material_threshold = 60
|
|
||||||
support_material_with_sheath = 1
|
|
||||||
support_material_xy_spacing = 50%
|
|
||||||
temperature = 235
|
|
||||||
thin_walls = 0
|
|
||||||
threads = 16
|
|
||||||
toolchange_gcode =
|
|
||||||
top_fill_pattern = rectilinear
|
|
||||||
top_infill_extrusion_width = 0.44
|
|
||||||
top_solid_infill_speed = 40
|
|
||||||
top_solid_layers = 5
|
|
||||||
travel_speed = 300
|
|
||||||
use_firmware_retraction = 0
|
|
||||||
use_relative_e_distances = 1
|
|
||||||
use_volumetric_e = 0
|
|
||||||
variable_layer_height = 1
|
|
||||||
wipe = 0
|
|
||||||
wipe_into_infill = 0
|
|
||||||
wipe_into_objects = 0
|
|
||||||
wipe_tower = 0
|
|
||||||
wipe_tower_bridging = 10
|
|
||||||
wipe_tower_rotation_angle = 0
|
|
||||||
wipe_tower_width = 60
|
|
||||||
wipe_tower_x = 180
|
|
||||||
wipe_tower_y = 140
|
|
||||||
wiping_volumes_extruders = 70,70
|
|
||||||
wiping_volumes_matrix = 0
|
|
||||||
xy_size_compensation = 0
|
|
||||||
z_offset = 0
|
|
||||||
460
Manuals/Slicer/PIF_45_Degree.ini
Normal file
460
Manuals/Slicer/PIF_45_Degree.ini
Normal file
@@ -0,0 +1,460 @@
|
|||||||
|
# generated by SuperSlicer 2.4 on 2022-08-16 at 18:33:39 UTC
|
||||||
|
allow_empty_layers = 0
|
||||||
|
avoid_crossing_not_first_layer = 1
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
avoid_crossing_perimeters_max_detour = 0
|
||||||
|
bed_custom_model = G:\\My Drive\\3D Printing\\Slicer_Beds\\voron2_350bed.stl
|
||||||
|
bed_custom_texture = G:\\My Drive\\3D Printing\\Slicer_Beds\\V2_bed_smooth_pei.png
|
||||||
|
bed_shape = 0x0,350x0,350x350,0x350
|
||||||
|
bed_temperature = 110
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
bottom_fill_pattern = monotonicgapfill
|
||||||
|
bottom_solid_layers = 5
|
||||||
|
bottom_solid_min_thickness = 1
|
||||||
|
bridge_acceleration = 5000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_fan_speed = -1
|
||||||
|
bridge_flow_ratio = 85%
|
||||||
|
bridge_internal_acceleration = 5000
|
||||||
|
bridge_internal_fan_speed = -1
|
||||||
|
bridge_overlap = 50%
|
||||||
|
bridge_overlap_min = 50%
|
||||||
|
bridge_speed = 140
|
||||||
|
bridge_speed_internal = 100%
|
||||||
|
bridge_type = nozzle
|
||||||
|
bridged_infill_margin = 200%
|
||||||
|
brim_acceleration = 5000
|
||||||
|
brim_ears = 0
|
||||||
|
brim_ears_detection_length = 1
|
||||||
|
brim_ears_max_angle = 120
|
||||||
|
brim_ears_pattern = concentric
|
||||||
|
brim_inside_holes = 0
|
||||||
|
brim_separation = 0
|
||||||
|
brim_speed = 50%
|
||||||
|
brim_width = 0
|
||||||
|
brim_width_interior = 0
|
||||||
|
chamber_temperature = 50
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
color_change_gcode = M600
|
||||||
|
colorprint_heights =
|
||||||
|
complete_objects = 0
|
||||||
|
complete_objects_one_brim = 0
|
||||||
|
complete_objects_one_skirt = 0
|
||||||
|
complete_objects_sort = object
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
curve_smoothing_angle_concave = 0
|
||||||
|
curve_smoothing_angle_convex = 0
|
||||||
|
curve_smoothing_cutoff_dist = 2
|
||||||
|
curve_smoothing_precision = 0
|
||||||
|
default_acceleration = 4000
|
||||||
|
default_filament_profile = ""
|
||||||
|
default_print_profile =
|
||||||
|
default_speed = 100
|
||||||
|
deretract_speed = 30
|
||||||
|
disable_fan_first_layers = 1
|
||||||
|
dont_support_bridges = 1
|
||||||
|
draft_shield = disabled
|
||||||
|
duplicate_distance = 6
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
end_gcode = PRINT_END
|
||||||
|
enforce_full_fill_volume = 1
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
exact_last_layer_height = 0
|
||||||
|
external_infill_margin = 150%
|
||||||
|
external_perimeter_acceleration = 1000
|
||||||
|
external_perimeter_cut_corners = 0%
|
||||||
|
external_perimeter_extrusion_spacing =
|
||||||
|
external_perimeter_extrusion_width = 100%
|
||||||
|
external_perimeter_fan_speed = -1
|
||||||
|
external_perimeter_overlap = 100%
|
||||||
|
external_perimeter_speed = 80
|
||||||
|
external_perimeters_first = 0
|
||||||
|
external_perimeters_hole = 1
|
||||||
|
external_perimeters_nothole = 1
|
||||||
|
external_perimeters_vase = 0
|
||||||
|
extra_loading_move = -2
|
||||||
|
extra_perimeters = 0
|
||||||
|
extra_perimeters_odd_layers = 0
|
||||||
|
extra_perimeters_overhangs = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_fan_offset = 0%
|
||||||
|
extruder_offset = 0x0
|
||||||
|
extruder_temperature_offset = 0
|
||||||
|
extrusion_axis = E
|
||||||
|
extrusion_multiplier = 0.924
|
||||||
|
extrusion_spacing =
|
||||||
|
extrusion_width = 125%
|
||||||
|
fan_always_on = 1
|
||||||
|
fan_below_layer_time = 0
|
||||||
|
fan_kickstart = 0
|
||||||
|
fan_percentage = 0
|
||||||
|
fan_speedup_overhangs = 1
|
||||||
|
fan_speedup_time = 1
|
||||||
|
feature_gcode =
|
||||||
|
filament_colour = #707070
|
||||||
|
filament_cooling_final_speed = 3.4
|
||||||
|
filament_cooling_initial_speed = 2.2
|
||||||
|
filament_cooling_moves = 4
|
||||||
|
filament_cooling_zone_pause = 0
|
||||||
|
filament_cost = 22
|
||||||
|
filament_custom_variables = ""
|
||||||
|
filament_density = 1.03
|
||||||
|
filament_deretract_speed = nil
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_dip_extraction_speed = 70
|
||||||
|
filament_dip_insertion_speed = 33
|
||||||
|
filament_enable_toolchange_part_fan = 0
|
||||||
|
filament_enable_toolchange_temp = 0
|
||||||
|
filament_load_time = 0
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_loading_speed_start = 3
|
||||||
|
filament_max_overlap = 100%
|
||||||
|
filament_max_speed = 0
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_max_wipe_tower_speed = 0
|
||||||
|
filament_melt_zone_pause = 0
|
||||||
|
filament_minimal_purge_on_wipe_tower = 15
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_retract_before_travel = nil
|
||||||
|
filament_retract_before_wipe = nil
|
||||||
|
filament_retract_layer_change = nil
|
||||||
|
filament_retract_length = nil
|
||||||
|
filament_retract_lift = nil
|
||||||
|
filament_retract_lift_above = nil
|
||||||
|
filament_retract_lift_below = nil
|
||||||
|
filament_retract_restart_extra = nil
|
||||||
|
filament_retract_speed = nil
|
||||||
|
filament_seam_gap = nil
|
||||||
|
filament_settings_id = "ABS - KVP"
|
||||||
|
filament_shrink = 100%
|
||||||
|
filament_skinnydip_distance = 31
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_spool_weight = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_toolchange_part_fan_speed = 50
|
||||||
|
filament_toolchange_temp = 200
|
||||||
|
filament_type = ABS
|
||||||
|
filament_unload_time = 0
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
filament_unloading_speed_start = 100
|
||||||
|
filament_use_fast_skinnydip = 0
|
||||||
|
filament_use_skinnydip = 0
|
||||||
|
filament_vendor = (Unknown)
|
||||||
|
filament_wipe = nil
|
||||||
|
filament_wipe_advanced_pigment = 0.5
|
||||||
|
filament_wipe_extra_perimeter = nil
|
||||||
|
filament_wipe_only_crossing = nil
|
||||||
|
filament_wipe_speed = nil
|
||||||
|
fill_angle = 0
|
||||||
|
fill_angle_increment = 0
|
||||||
|
fill_density = 40%
|
||||||
|
fill_pattern = grid
|
||||||
|
fill_smooth_distribution = 10%
|
||||||
|
fill_smooth_width = 50%
|
||||||
|
fill_top_flow_ratio = 100%
|
||||||
|
first_layer_acceleration = 2000
|
||||||
|
first_layer_acceleration_over_raft = 0
|
||||||
|
first_layer_bed_temperature = 110
|
||||||
|
first_layer_extrusion_spacing =
|
||||||
|
first_layer_extrusion_width = 0
|
||||||
|
first_layer_flow_ratio = 100%
|
||||||
|
first_layer_height = 0.25
|
||||||
|
first_layer_infill_speed = 60
|
||||||
|
first_layer_min_speed = 0
|
||||||
|
first_layer_size_compensation = -0.1
|
||||||
|
first_layer_size_compensation_layers = 3
|
||||||
|
first_layer_speed = 30
|
||||||
|
first_layer_speed_over_raft = 30
|
||||||
|
first_layer_temperature = 245
|
||||||
|
full_fan_speed_layer = 0
|
||||||
|
fuzzy_skin = none
|
||||||
|
fuzzy_skin_point_dist = 200%
|
||||||
|
fuzzy_skin_thickness = 150%
|
||||||
|
gap_fill_acceleration = 2000
|
||||||
|
gap_fill_enabled = 1
|
||||||
|
gap_fill_last = 1
|
||||||
|
gap_fill_min_area = 50%
|
||||||
|
gap_fill_overlap = 100%
|
||||||
|
gap_fill_speed = 30
|
||||||
|
gcode_comments = 0
|
||||||
|
gcode_filename_illegal_char = [<>:"/\\\\|?*]
|
||||||
|
gcode_flavor = klipper
|
||||||
|
gcode_label_objects = 1
|
||||||
|
gcode_precision_e = 5
|
||||||
|
gcode_precision_xyz = 3
|
||||||
|
gcode_resolution = 0
|
||||||
|
gcode_substitutions =
|
||||||
|
high_current_on_filament_swap = 0
|
||||||
|
hole_size_compensation = 0
|
||||||
|
hole_size_threshold = 100
|
||||||
|
hole_to_polyhole = 0
|
||||||
|
hole_to_polyhole_threshold = 0.01
|
||||||
|
hole_to_polyhole_twisted = 1
|
||||||
|
host_type = octoprint
|
||||||
|
infill_acceleration = 7000
|
||||||
|
infill_anchor = 600%
|
||||||
|
infill_anchor_max = 0
|
||||||
|
infill_connection = connected
|
||||||
|
infill_connection_bottom = connected
|
||||||
|
infill_connection_solid = connected
|
||||||
|
infill_connection_top = connected
|
||||||
|
infill_dense = 0
|
||||||
|
infill_dense_algo = autoenlarged
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_spacing =
|
||||||
|
infill_extrusion_width = 180%
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 40%
|
||||||
|
infill_speed = 300
|
||||||
|
init_z_rotate = 45
|
||||||
|
interface_shells = 0
|
||||||
|
ironing = 0
|
||||||
|
ironing_acceleration = 2000
|
||||||
|
ironing_angle = -1
|
||||||
|
ironing_flowrate = 15%
|
||||||
|
ironing_spacing = 0.1
|
||||||
|
ironing_speed = 15
|
||||||
|
ironing_type = top
|
||||||
|
layer_gcode =
|
||||||
|
layer_height = 0.2
|
||||||
|
lift_min = 0
|
||||||
|
machine_limits_usage = time_estimate_only
|
||||||
|
machine_max_acceleration_e = 10000,5000
|
||||||
|
machine_max_acceleration_extruding = 10000,1250
|
||||||
|
machine_max_acceleration_retracting = 1500,1250
|
||||||
|
machine_max_acceleration_travel = 10000,1250
|
||||||
|
machine_max_acceleration_x = 10000,1000
|
||||||
|
machine_max_acceleration_y = 10000,1000
|
||||||
|
machine_max_acceleration_z = 300,200
|
||||||
|
machine_max_feedrate_e = 120,120
|
||||||
|
machine_max_feedrate_x = 450,200
|
||||||
|
machine_max_feedrate_y = 450,200
|
||||||
|
machine_max_feedrate_z = 30,12
|
||||||
|
machine_max_jerk_e = 2.5,2.5
|
||||||
|
machine_max_jerk_x = 10,10
|
||||||
|
machine_max_jerk_y = 10,10
|
||||||
|
machine_max_jerk_z = 0.2,0.4
|
||||||
|
machine_min_extruding_rate = 0,0
|
||||||
|
machine_min_travel_rate = 0,0
|
||||||
|
max_fan_speed = 100
|
||||||
|
max_gcode_per_second = 1500
|
||||||
|
max_layer_height = 75%
|
||||||
|
max_print_height = 320
|
||||||
|
max_print_speed = 300
|
||||||
|
max_speed_reduction = 90%
|
||||||
|
max_volumetric_speed = 24
|
||||||
|
milling_after_z = 200%
|
||||||
|
milling_diameter =
|
||||||
|
milling_extra_size = 150%
|
||||||
|
milling_post_process = 0
|
||||||
|
milling_speed = 30
|
||||||
|
milling_toolchange_end_gcode =
|
||||||
|
milling_toolchange_start_gcode =
|
||||||
|
milling_z_lift =
|
||||||
|
min_fan_speed = 50
|
||||||
|
min_layer_height = 0.08
|
||||||
|
min_length = 0
|
||||||
|
min_print_speed = 10
|
||||||
|
min_skirt_length = 20
|
||||||
|
min_width_top_surface = 200%
|
||||||
|
mmu_segmented_region_max_width = 0
|
||||||
|
model_precision = 0.0001
|
||||||
|
no_perimeter_unsupported_algo = none
|
||||||
|
notes =
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
only_one_perimeter_first_layer = 0
|
||||||
|
only_one_perimeter_top = 1
|
||||||
|
only_one_perimeter_top_other_algo = 0
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
|
||||||
|
over_bridge_flow_ratio = 100%
|
||||||
|
overhangs_acceleration = 2000
|
||||||
|
overhangs_reverse = 0
|
||||||
|
overhangs_reverse_threshold = 250%
|
||||||
|
overhangs_speed = 100%
|
||||||
|
overhangs_width = 75%
|
||||||
|
overhangs_width_speed = 0
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
pause_print_gcode = PAUSE
|
||||||
|
perimeter_acceleration = 2000
|
||||||
|
perimeter_bonding = 0%
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_spacing =
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_loop = 0
|
||||||
|
perimeter_loop_seam = rear
|
||||||
|
perimeter_overlap = 100%
|
||||||
|
perimeter_round_corners = 0
|
||||||
|
perimeter_speed = 150
|
||||||
|
perimeters = 4
|
||||||
|
physical_printer_settings_id = V2.247
|
||||||
|
post_process =
|
||||||
|
print_custom_variables =
|
||||||
|
print_extrusion_multiplier = 100%
|
||||||
|
print_host =
|
||||||
|
print_retract_length = -1
|
||||||
|
print_retract_lift = -1
|
||||||
|
print_settings_id = .Voron HF - PIF 45
|
||||||
|
print_temperature = 0
|
||||||
|
printer_custom_variables =
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id = Voron HF 0.4mm (45 Degree)
|
||||||
|
printer_technology = FFF
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
printhost_apikey =
|
||||||
|
printhost_cafile =
|
||||||
|
printhost_port =
|
||||||
|
raft_contact_distance = 0.1
|
||||||
|
raft_expansion = 1.5
|
||||||
|
raft_first_layer_density = 90%
|
||||||
|
raft_first_layer_expansion = 3
|
||||||
|
raft_layers = 0
|
||||||
|
remaining_times = 1
|
||||||
|
remaining_times_type = m73
|
||||||
|
resolution = 0.0125
|
||||||
|
resolution_internal = 0.2
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.5
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.2
|
||||||
|
retract_lift_above = 0.25
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_lift_first_layer = 0
|
||||||
|
retract_lift_top = "All surfaces"
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 30
|
||||||
|
seam_angle_cost = 100%
|
||||||
|
seam_gap = 0
|
||||||
|
seam_position = rear
|
||||||
|
seam_travel_cost = 0%
|
||||||
|
silent_mode = 0
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
single_extruder_multi_material_priming = 1
|
||||||
|
skirt_brim = 0
|
||||||
|
skirt_distance = 3
|
||||||
|
skirt_distance_from_brim = 1
|
||||||
|
skirt_extrusion_width = 0
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 0
|
||||||
|
slice_closing_radius = 0.049
|
||||||
|
slicing_mode = regular
|
||||||
|
slowdown_below_layer_time = 15
|
||||||
|
small_perimeter_max_length = 20
|
||||||
|
small_perimeter_min_length = 6
|
||||||
|
small_perimeter_speed = 30
|
||||||
|
solid_fill_pattern = monotonic
|
||||||
|
solid_infill_acceleration = 5000
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_spacing =
|
||||||
|
solid_infill_extrusion_width = 140%
|
||||||
|
solid_infill_overlap = 100%
|
||||||
|
solid_infill_speed = 200
|
||||||
|
solid_over_perimeters = 0
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
|
||||||
|
start_gcode_manual = 0
|
||||||
|
support_material = 0
|
||||||
|
support_material_acceleration = 5000
|
||||||
|
support_material_angle = 45
|
||||||
|
support_material_auto = 1
|
||||||
|
support_material_bottom_contact_distance = 0
|
||||||
|
support_material_bottom_interface_layers = -1
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_closing_radius = 2
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_contact_distance_type = filament
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_acceleration = 5000
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 3
|
||||||
|
support_material_interface_pattern = rectilinear
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 3
|
||||||
|
support_material_speed = 150
|
||||||
|
support_material_style = grid
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 30
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 75%
|
||||||
|
temperature = 245
|
||||||
|
template_custom_gcode =
|
||||||
|
thin_perimeters = 80%
|
||||||
|
thin_perimeters_all = 20%
|
||||||
|
thin_walls = 1
|
||||||
|
thin_walls_acceleration = 2000
|
||||||
|
thin_walls_merge = 1
|
||||||
|
thin_walls_min_width = 33%
|
||||||
|
thin_walls_overlap = 50%
|
||||||
|
thin_walls_speed = 80
|
||||||
|
threads = 16
|
||||||
|
thumbnails = 32x32,400x300
|
||||||
|
thumbnails_color = #00FF00
|
||||||
|
thumbnails_custom_color = 1
|
||||||
|
thumbnails_end_file = 0
|
||||||
|
thumbnails_format = PNG
|
||||||
|
thumbnails_with_bed = 1
|
||||||
|
time_estimation_compensation = 100%
|
||||||
|
tool_name = ""
|
||||||
|
toolchange_gcode =
|
||||||
|
top_fan_speed = -1
|
||||||
|
top_fill_pattern = monotonicgapfill
|
||||||
|
top_infill_extrusion_spacing =
|
||||||
|
top_infill_extrusion_width = 100%
|
||||||
|
top_solid_infill_acceleration = 2000
|
||||||
|
top_solid_infill_speed = 60
|
||||||
|
top_solid_layers = 5
|
||||||
|
top_solid_min_thickness = 1
|
||||||
|
travel_acceleration = 10000
|
||||||
|
travel_deceleration_use_target = 1
|
||||||
|
travel_speed = 450
|
||||||
|
travel_speed_z = 0
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
wipe_advanced = 0
|
||||||
|
wipe_advanced_algo = linear
|
||||||
|
wipe_advanced_multiplier = 60
|
||||||
|
wipe_advanced_nozzle_melted_volume = 120
|
||||||
|
wipe_extra_perimeter = 0
|
||||||
|
wipe_into_infill = 0
|
||||||
|
wipe_into_objects = 0
|
||||||
|
wipe_only_crossing = 1
|
||||||
|
wipe_speed = 0
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_brim_width = 2
|
||||||
|
wipe_tower_no_sparse_layers = 0
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
wiping_volumes_extruders = 70,70
|
||||||
|
wiping_volumes_matrix = 0
|
||||||
|
xy_inner_size_compensation = 0
|
||||||
|
xy_size_compensation = 0
|
||||||
|
z_offset = 0
|
||||||
|
z_step = 0.04
|
||||||
460
Manuals/Slicer/PIF_Standard.ini
Normal file
460
Manuals/Slicer/PIF_Standard.ini
Normal file
@@ -0,0 +1,460 @@
|
|||||||
|
# generated by SuperSlicer 2.4 on 2022-08-16 at 18:33:28 UTC
|
||||||
|
allow_empty_layers = 0
|
||||||
|
avoid_crossing_not_first_layer = 1
|
||||||
|
avoid_crossing_perimeters = 0
|
||||||
|
avoid_crossing_perimeters_max_detour = 0
|
||||||
|
bed_custom_model = G:\\My Drive\\3D Printing\\Slicer_Beds\\voron2_350bed.stl
|
||||||
|
bed_custom_texture = G:\\My Drive\\3D Printing\\Slicer_Beds\\V2_bed_smooth_pei.png
|
||||||
|
bed_shape = 0x0,350x0,350x350,0x350
|
||||||
|
bed_temperature = 110
|
||||||
|
before_layer_gcode =
|
||||||
|
between_objects_gcode =
|
||||||
|
bottom_fill_pattern = monotonicgapfill
|
||||||
|
bottom_solid_layers = 5
|
||||||
|
bottom_solid_min_thickness = 1
|
||||||
|
bridge_acceleration = 5000
|
||||||
|
bridge_angle = 0
|
||||||
|
bridge_fan_speed = -1
|
||||||
|
bridge_flow_ratio = 85%
|
||||||
|
bridge_internal_acceleration = 5000
|
||||||
|
bridge_internal_fan_speed = -1
|
||||||
|
bridge_overlap = 50%
|
||||||
|
bridge_overlap_min = 50%
|
||||||
|
bridge_speed = 140
|
||||||
|
bridge_speed_internal = 100%
|
||||||
|
bridge_type = nozzle
|
||||||
|
bridged_infill_margin = 200%
|
||||||
|
brim_acceleration = 5000
|
||||||
|
brim_ears = 0
|
||||||
|
brim_ears_detection_length = 1
|
||||||
|
brim_ears_max_angle = 120
|
||||||
|
brim_ears_pattern = concentric
|
||||||
|
brim_inside_holes = 0
|
||||||
|
brim_separation = 0
|
||||||
|
brim_speed = 50%
|
||||||
|
brim_width = 0
|
||||||
|
brim_width_interior = 0
|
||||||
|
chamber_temperature = 50
|
||||||
|
clip_multipart_objects = 1
|
||||||
|
color_change_gcode = M600
|
||||||
|
colorprint_heights =
|
||||||
|
complete_objects = 0
|
||||||
|
complete_objects_one_brim = 0
|
||||||
|
complete_objects_one_skirt = 0
|
||||||
|
complete_objects_sort = object
|
||||||
|
cooling_tube_length = 5
|
||||||
|
cooling_tube_retraction = 91.5
|
||||||
|
curve_smoothing_angle_concave = 0
|
||||||
|
curve_smoothing_angle_convex = 0
|
||||||
|
curve_smoothing_cutoff_dist = 2
|
||||||
|
curve_smoothing_precision = 0
|
||||||
|
default_acceleration = 4000
|
||||||
|
default_filament_profile = ""
|
||||||
|
default_print_profile =
|
||||||
|
default_speed = 100
|
||||||
|
deretract_speed = 30
|
||||||
|
disable_fan_first_layers = 1
|
||||||
|
dont_support_bridges = 1
|
||||||
|
draft_shield = disabled
|
||||||
|
duplicate_distance = 6
|
||||||
|
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||||
|
end_gcode = PRINT_END
|
||||||
|
enforce_full_fill_volume = 1
|
||||||
|
ensure_vertical_shell_thickness = 1
|
||||||
|
exact_last_layer_height = 0
|
||||||
|
external_infill_margin = 150%
|
||||||
|
external_perimeter_acceleration = 1000
|
||||||
|
external_perimeter_cut_corners = 0%
|
||||||
|
external_perimeter_extrusion_spacing =
|
||||||
|
external_perimeter_extrusion_width = 100%
|
||||||
|
external_perimeter_fan_speed = -1
|
||||||
|
external_perimeter_overlap = 100%
|
||||||
|
external_perimeter_speed = 80
|
||||||
|
external_perimeters_first = 0
|
||||||
|
external_perimeters_hole = 1
|
||||||
|
external_perimeters_nothole = 1
|
||||||
|
external_perimeters_vase = 0
|
||||||
|
extra_loading_move = -2
|
||||||
|
extra_perimeters = 0
|
||||||
|
extra_perimeters_odd_layers = 0
|
||||||
|
extra_perimeters_overhangs = 1
|
||||||
|
extruder_clearance_height = 20
|
||||||
|
extruder_clearance_radius = 20
|
||||||
|
extruder_colour = ""
|
||||||
|
extruder_fan_offset = 0%
|
||||||
|
extruder_offset = 0x0
|
||||||
|
extruder_temperature_offset = 0
|
||||||
|
extrusion_axis = E
|
||||||
|
extrusion_multiplier = 0.924
|
||||||
|
extrusion_spacing =
|
||||||
|
extrusion_width = 125%
|
||||||
|
fan_always_on = 1
|
||||||
|
fan_below_layer_time = 0
|
||||||
|
fan_kickstart = 0
|
||||||
|
fan_percentage = 0
|
||||||
|
fan_speedup_overhangs = 1
|
||||||
|
fan_speedup_time = 1
|
||||||
|
feature_gcode =
|
||||||
|
filament_colour = #707070
|
||||||
|
filament_cooling_final_speed = 3.4
|
||||||
|
filament_cooling_initial_speed = 2.2
|
||||||
|
filament_cooling_moves = 4
|
||||||
|
filament_cooling_zone_pause = 0
|
||||||
|
filament_cost = 22
|
||||||
|
filament_custom_variables = ""
|
||||||
|
filament_density = 1.03
|
||||||
|
filament_deretract_speed = nil
|
||||||
|
filament_diameter = 1.75
|
||||||
|
filament_dip_extraction_speed = 70
|
||||||
|
filament_dip_insertion_speed = 33
|
||||||
|
filament_enable_toolchange_part_fan = 0
|
||||||
|
filament_enable_toolchange_temp = 0
|
||||||
|
filament_load_time = 0
|
||||||
|
filament_loading_speed = 28
|
||||||
|
filament_loading_speed_start = 3
|
||||||
|
filament_max_overlap = 100%
|
||||||
|
filament_max_speed = 0
|
||||||
|
filament_max_volumetric_speed = 0
|
||||||
|
filament_max_wipe_tower_speed = 0
|
||||||
|
filament_melt_zone_pause = 0
|
||||||
|
filament_minimal_purge_on_wipe_tower = 15
|
||||||
|
filament_notes = ""
|
||||||
|
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||||
|
filament_retract_before_travel = nil
|
||||||
|
filament_retract_before_wipe = nil
|
||||||
|
filament_retract_layer_change = nil
|
||||||
|
filament_retract_length = nil
|
||||||
|
filament_retract_lift = nil
|
||||||
|
filament_retract_lift_above = nil
|
||||||
|
filament_retract_lift_below = nil
|
||||||
|
filament_retract_restart_extra = nil
|
||||||
|
filament_retract_speed = nil
|
||||||
|
filament_seam_gap = nil
|
||||||
|
filament_settings_id = "ABS - KVP"
|
||||||
|
filament_shrink = 100%
|
||||||
|
filament_skinnydip_distance = 31
|
||||||
|
filament_soluble = 0
|
||||||
|
filament_spool_weight = 0
|
||||||
|
filament_toolchange_delay = 0
|
||||||
|
filament_toolchange_part_fan_speed = 50
|
||||||
|
filament_toolchange_temp = 200
|
||||||
|
filament_type = ABS
|
||||||
|
filament_unload_time = 0
|
||||||
|
filament_unloading_speed = 90
|
||||||
|
filament_unloading_speed_start = 100
|
||||||
|
filament_use_fast_skinnydip = 0
|
||||||
|
filament_use_skinnydip = 0
|
||||||
|
filament_vendor = (Unknown)
|
||||||
|
filament_wipe = nil
|
||||||
|
filament_wipe_advanced_pigment = 0.5
|
||||||
|
filament_wipe_extra_perimeter = nil
|
||||||
|
filament_wipe_only_crossing = nil
|
||||||
|
filament_wipe_speed = nil
|
||||||
|
fill_angle = 45
|
||||||
|
fill_angle_increment = 0
|
||||||
|
fill_density = 40%
|
||||||
|
fill_pattern = grid
|
||||||
|
fill_smooth_distribution = 10%
|
||||||
|
fill_smooth_width = 50%
|
||||||
|
fill_top_flow_ratio = 100%
|
||||||
|
first_layer_acceleration = 2000
|
||||||
|
first_layer_acceleration_over_raft = 0
|
||||||
|
first_layer_bed_temperature = 110
|
||||||
|
first_layer_extrusion_spacing =
|
||||||
|
first_layer_extrusion_width = 0
|
||||||
|
first_layer_flow_ratio = 100%
|
||||||
|
first_layer_height = 0.25
|
||||||
|
first_layer_infill_speed = 60
|
||||||
|
first_layer_min_speed = 0
|
||||||
|
first_layer_size_compensation = -0.1
|
||||||
|
first_layer_size_compensation_layers = 3
|
||||||
|
first_layer_speed = 30
|
||||||
|
first_layer_speed_over_raft = 30
|
||||||
|
first_layer_temperature = 245
|
||||||
|
full_fan_speed_layer = 0
|
||||||
|
fuzzy_skin = none
|
||||||
|
fuzzy_skin_point_dist = 200%
|
||||||
|
fuzzy_skin_thickness = 150%
|
||||||
|
gap_fill_acceleration = 2000
|
||||||
|
gap_fill_enabled = 1
|
||||||
|
gap_fill_last = 1
|
||||||
|
gap_fill_min_area = 50%
|
||||||
|
gap_fill_overlap = 100%
|
||||||
|
gap_fill_speed = 30
|
||||||
|
gcode_comments = 0
|
||||||
|
gcode_filename_illegal_char = [<>:"/\\\\|?*]
|
||||||
|
gcode_flavor = klipper
|
||||||
|
gcode_label_objects = 1
|
||||||
|
gcode_precision_e = 5
|
||||||
|
gcode_precision_xyz = 3
|
||||||
|
gcode_resolution = 0
|
||||||
|
gcode_substitutions =
|
||||||
|
high_current_on_filament_swap = 0
|
||||||
|
hole_size_compensation = 0
|
||||||
|
hole_size_threshold = 100
|
||||||
|
hole_to_polyhole = 0
|
||||||
|
hole_to_polyhole_threshold = 0.01
|
||||||
|
hole_to_polyhole_twisted = 1
|
||||||
|
host_type = octoprint
|
||||||
|
infill_acceleration = 7000
|
||||||
|
infill_anchor = 600%
|
||||||
|
infill_anchor_max = 0
|
||||||
|
infill_connection = connected
|
||||||
|
infill_connection_bottom = connected
|
||||||
|
infill_connection_solid = connected
|
||||||
|
infill_connection_top = connected
|
||||||
|
infill_dense = 0
|
||||||
|
infill_dense_algo = autoenlarged
|
||||||
|
infill_every_layers = 1
|
||||||
|
infill_extruder = 1
|
||||||
|
infill_extrusion_spacing =
|
||||||
|
infill_extrusion_width = 180%
|
||||||
|
infill_first = 0
|
||||||
|
infill_only_where_needed = 0
|
||||||
|
infill_overlap = 40%
|
||||||
|
infill_speed = 300
|
||||||
|
init_z_rotate = 0
|
||||||
|
interface_shells = 0
|
||||||
|
ironing = 0
|
||||||
|
ironing_acceleration = 2000
|
||||||
|
ironing_angle = -1
|
||||||
|
ironing_flowrate = 15%
|
||||||
|
ironing_spacing = 0.1
|
||||||
|
ironing_speed = 15
|
||||||
|
ironing_type = top
|
||||||
|
layer_gcode =
|
||||||
|
layer_height = 0.2
|
||||||
|
lift_min = 0
|
||||||
|
machine_limits_usage = time_estimate_only
|
||||||
|
machine_max_acceleration_e = 10000,5000
|
||||||
|
machine_max_acceleration_extruding = 10000,1250
|
||||||
|
machine_max_acceleration_retracting = 1500,1250
|
||||||
|
machine_max_acceleration_travel = 10000,1250
|
||||||
|
machine_max_acceleration_x = 10000,1000
|
||||||
|
machine_max_acceleration_y = 10000,1000
|
||||||
|
machine_max_acceleration_z = 300,200
|
||||||
|
machine_max_feedrate_e = 120,120
|
||||||
|
machine_max_feedrate_x = 450,200
|
||||||
|
machine_max_feedrate_y = 450,200
|
||||||
|
machine_max_feedrate_z = 30,12
|
||||||
|
machine_max_jerk_e = 2.5,2.5
|
||||||
|
machine_max_jerk_x = 10,10
|
||||||
|
machine_max_jerk_y = 10,10
|
||||||
|
machine_max_jerk_z = 0.2,0.4
|
||||||
|
machine_min_extruding_rate = 0,0
|
||||||
|
machine_min_travel_rate = 0,0
|
||||||
|
max_fan_speed = 100
|
||||||
|
max_gcode_per_second = 1500
|
||||||
|
max_layer_height = 75%
|
||||||
|
max_print_height = 320
|
||||||
|
max_print_speed = 300
|
||||||
|
max_speed_reduction = 90%
|
||||||
|
max_volumetric_speed = 24
|
||||||
|
milling_after_z = 200%
|
||||||
|
milling_diameter =
|
||||||
|
milling_extra_size = 150%
|
||||||
|
milling_post_process = 0
|
||||||
|
milling_speed = 30
|
||||||
|
milling_toolchange_end_gcode =
|
||||||
|
milling_toolchange_start_gcode =
|
||||||
|
milling_z_lift =
|
||||||
|
min_fan_speed = 50
|
||||||
|
min_layer_height = 0.08
|
||||||
|
min_length = 0
|
||||||
|
min_print_speed = 10
|
||||||
|
min_skirt_length = 20
|
||||||
|
min_width_top_surface = 200%
|
||||||
|
mmu_segmented_region_max_width = 0
|
||||||
|
model_precision = 0.0001
|
||||||
|
no_perimeter_unsupported_algo = none
|
||||||
|
notes =
|
||||||
|
nozzle_diameter = 0.4
|
||||||
|
only_one_perimeter_first_layer = 0
|
||||||
|
only_one_perimeter_top = 1
|
||||||
|
only_one_perimeter_top_other_algo = 0
|
||||||
|
only_retract_when_crossing_perimeters = 1
|
||||||
|
ooze_prevention = 0
|
||||||
|
output_filename_format = [input_filename_base]-[printer_settings_id]-[filament_settings_id].gcode
|
||||||
|
over_bridge_flow_ratio = 100%
|
||||||
|
overhangs_acceleration = 2000
|
||||||
|
overhangs_reverse = 0
|
||||||
|
overhangs_reverse_threshold = 250%
|
||||||
|
overhangs_speed = 100%
|
||||||
|
overhangs_width = 75%
|
||||||
|
overhangs_width_speed = 0
|
||||||
|
parking_pos_retraction = 92
|
||||||
|
pause_print_gcode = PAUSE
|
||||||
|
perimeter_acceleration = 2000
|
||||||
|
perimeter_bonding = 0%
|
||||||
|
perimeter_extruder = 1
|
||||||
|
perimeter_extrusion_spacing =
|
||||||
|
perimeter_extrusion_width = 0
|
||||||
|
perimeter_loop = 0
|
||||||
|
perimeter_loop_seam = rear
|
||||||
|
perimeter_overlap = 100%
|
||||||
|
perimeter_round_corners = 0
|
||||||
|
perimeter_speed = 150
|
||||||
|
perimeters = 4
|
||||||
|
physical_printer_settings_id = V2.247
|
||||||
|
post_process =
|
||||||
|
print_custom_variables =
|
||||||
|
print_extrusion_multiplier = 100%
|
||||||
|
print_host =
|
||||||
|
print_retract_length = -1
|
||||||
|
print_retract_lift = -1
|
||||||
|
print_settings_id = .Voron HF - PIF
|
||||||
|
print_temperature = 0
|
||||||
|
printer_custom_variables =
|
||||||
|
printer_model =
|
||||||
|
printer_notes =
|
||||||
|
printer_settings_id = Voron HF 0.4mm
|
||||||
|
printer_technology = FFF
|
||||||
|
printer_variant =
|
||||||
|
printer_vendor =
|
||||||
|
printhost_apikey =
|
||||||
|
printhost_cafile =
|
||||||
|
printhost_port =
|
||||||
|
raft_contact_distance = 0.1
|
||||||
|
raft_expansion = 1.5
|
||||||
|
raft_first_layer_density = 90%
|
||||||
|
raft_first_layer_expansion = 3
|
||||||
|
raft_layers = 0
|
||||||
|
remaining_times = 1
|
||||||
|
remaining_times_type = m73
|
||||||
|
resolution = 0.0125
|
||||||
|
resolution_internal = 0.2
|
||||||
|
retract_before_travel = 2
|
||||||
|
retract_before_wipe = 0%
|
||||||
|
retract_layer_change = 0
|
||||||
|
retract_length = 0.5
|
||||||
|
retract_length_toolchange = 10
|
||||||
|
retract_lift = 0.2
|
||||||
|
retract_lift_above = 0.25
|
||||||
|
retract_lift_below = 0
|
||||||
|
retract_lift_first_layer = 0
|
||||||
|
retract_lift_top = "All surfaces"
|
||||||
|
retract_restart_extra = 0
|
||||||
|
retract_restart_extra_toolchange = 0
|
||||||
|
retract_speed = 30
|
||||||
|
seam_angle_cost = 80%
|
||||||
|
seam_gap = 0
|
||||||
|
seam_position = cost
|
||||||
|
seam_travel_cost = 20%
|
||||||
|
silent_mode = 0
|
||||||
|
single_extruder_multi_material = 0
|
||||||
|
single_extruder_multi_material_priming = 1
|
||||||
|
skirt_brim = 0
|
||||||
|
skirt_distance = 3
|
||||||
|
skirt_distance_from_brim = 1
|
||||||
|
skirt_extrusion_width = 0
|
||||||
|
skirt_height = 1
|
||||||
|
skirts = 0
|
||||||
|
slice_closing_radius = 0.049
|
||||||
|
slicing_mode = regular
|
||||||
|
slowdown_below_layer_time = 15
|
||||||
|
small_perimeter_max_length = 20
|
||||||
|
small_perimeter_min_length = 6
|
||||||
|
small_perimeter_speed = 30
|
||||||
|
solid_fill_pattern = monotonic
|
||||||
|
solid_infill_acceleration = 5000
|
||||||
|
solid_infill_below_area = 0
|
||||||
|
solid_infill_every_layers = 0
|
||||||
|
solid_infill_extruder = 1
|
||||||
|
solid_infill_extrusion_spacing =
|
||||||
|
solid_infill_extrusion_width = 140%
|
||||||
|
solid_infill_overlap = 100%
|
||||||
|
solid_infill_speed = 200
|
||||||
|
solid_over_perimeters = 0
|
||||||
|
spiral_vase = 0
|
||||||
|
standby_temperature_delta = -5
|
||||||
|
start_filament_gcode = "; Filament gcode\n"
|
||||||
|
start_gcode = M104 S0 ; Stops PS/SS from sending temp waits separately\nM140 S0\nPRINT_START BED=[first_layer_bed_temperature] HOTEND={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} CHAMBER=[chamber_temperature]
|
||||||
|
start_gcode_manual = 0
|
||||||
|
support_material = 0
|
||||||
|
support_material_acceleration = 5000
|
||||||
|
support_material_angle = 0
|
||||||
|
support_material_auto = 1
|
||||||
|
support_material_bottom_contact_distance = 0
|
||||||
|
support_material_bottom_interface_layers = -1
|
||||||
|
support_material_buildplate_only = 0
|
||||||
|
support_material_closing_radius = 2
|
||||||
|
support_material_contact_distance = 0.1
|
||||||
|
support_material_contact_distance_type = filament
|
||||||
|
support_material_enforce_layers = 0
|
||||||
|
support_material_extruder = 1
|
||||||
|
support_material_extrusion_width = 0
|
||||||
|
support_material_interface_acceleration = 5000
|
||||||
|
support_material_interface_contact_loops = 0
|
||||||
|
support_material_interface_extruder = 1
|
||||||
|
support_material_interface_layers = 3
|
||||||
|
support_material_interface_pattern = rectilinear
|
||||||
|
support_material_interface_spacing = 0.2
|
||||||
|
support_material_interface_speed = 100
|
||||||
|
support_material_pattern = rectilinear
|
||||||
|
support_material_spacing = 3
|
||||||
|
support_material_speed = 150
|
||||||
|
support_material_style = grid
|
||||||
|
support_material_synchronize_layers = 0
|
||||||
|
support_material_threshold = 30
|
||||||
|
support_material_with_sheath = 0
|
||||||
|
support_material_xy_spacing = 75%
|
||||||
|
temperature = 245
|
||||||
|
template_custom_gcode =
|
||||||
|
thin_perimeters = 80%
|
||||||
|
thin_perimeters_all = 20%
|
||||||
|
thin_walls = 1
|
||||||
|
thin_walls_acceleration = 2000
|
||||||
|
thin_walls_merge = 1
|
||||||
|
thin_walls_min_width = 33%
|
||||||
|
thin_walls_overlap = 50%
|
||||||
|
thin_walls_speed = 80
|
||||||
|
threads = 16
|
||||||
|
thumbnails = 32x32,400x300
|
||||||
|
thumbnails_color = #00FF00
|
||||||
|
thumbnails_custom_color = 1
|
||||||
|
thumbnails_end_file = 0
|
||||||
|
thumbnails_format = PNG
|
||||||
|
thumbnails_with_bed = 1
|
||||||
|
time_estimation_compensation = 100%
|
||||||
|
tool_name = ""
|
||||||
|
toolchange_gcode =
|
||||||
|
top_fan_speed = -1
|
||||||
|
top_fill_pattern = monotonicgapfill
|
||||||
|
top_infill_extrusion_spacing =
|
||||||
|
top_infill_extrusion_width = 100%
|
||||||
|
top_solid_infill_acceleration = 2000
|
||||||
|
top_solid_infill_speed = 60
|
||||||
|
top_solid_layers = 5
|
||||||
|
top_solid_min_thickness = 1
|
||||||
|
travel_acceleration = 10000
|
||||||
|
travel_deceleration_use_target = 1
|
||||||
|
travel_speed = 450
|
||||||
|
travel_speed_z = 0
|
||||||
|
use_firmware_retraction = 0
|
||||||
|
use_relative_e_distances = 1
|
||||||
|
use_volumetric_e = 0
|
||||||
|
variable_layer_height = 1
|
||||||
|
wipe = 0
|
||||||
|
wipe_advanced = 0
|
||||||
|
wipe_advanced_algo = linear
|
||||||
|
wipe_advanced_multiplier = 60
|
||||||
|
wipe_advanced_nozzle_melted_volume = 120
|
||||||
|
wipe_extra_perimeter = 0
|
||||||
|
wipe_into_infill = 0
|
||||||
|
wipe_into_objects = 0
|
||||||
|
wipe_only_crossing = 1
|
||||||
|
wipe_speed = 0
|
||||||
|
wipe_tower = 0
|
||||||
|
wipe_tower_bridging = 10
|
||||||
|
wipe_tower_brim_width = 2
|
||||||
|
wipe_tower_no_sparse_layers = 0
|
||||||
|
wipe_tower_rotation_angle = 0
|
||||||
|
wipe_tower_width = 60
|
||||||
|
wipe_tower_x = 180
|
||||||
|
wipe_tower_y = 140
|
||||||
|
wiping_volumes_extruders = 70,70
|
||||||
|
wiping_volumes_matrix = 0
|
||||||
|
xy_inner_size_compensation = 0
|
||||||
|
xy_size_compensation = 0
|
||||||
|
z_offset = 0
|
||||||
|
z_step = 0.04
|
||||||
@@ -4,6 +4,9 @@
|
|||||||
2. If you are not using 350mm bed, adjust bed size.
|
2. If you are not using 350mm bed, adjust bed size.
|
||||||
3. If you are using different nozzle, then adjust it's size.
|
3. If you are using different nozzle, then adjust it's size.
|
||||||
4. We recommend using [SuperSlicer](https://github.com/supermerill/SuperSlicer) for Voron Printers but you can also use [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer).
|
4. We recommend using [SuperSlicer](https://github.com/supermerill/SuperSlicer) for Voron Printers but you can also use [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer).
|
||||||
|
5. Select Voron V2.4 Afterburner 0.4 nozzle as it closest default preset in slicer.
|
||||||
|
6. You can import PIF profiles in this folder, but please do read first on
|
||||||
|
[Ellis-PIF-Profile](https://github.com/AndrewEllis93/Ellis-PIF-Profile). These files are from him.
|
||||||
|
|
||||||
## Voron 2.4 Bed STL for PrusaSlicer and SuperSlicer
|
## Voron 2.4 Bed STL for PrusaSlicer and SuperSlicer
|
||||||
Download the appropriate STL for your bed size
|
Download the appropriate STL for your bed size
|
||||||
@@ -20,3 +23,4 @@ Import under Printer Settings > General > Bed Shape (Set ...) > Model (Load...)
|
|||||||
[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)
|
[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)
|
||||||
[Voron 2 Github](https://github.com/VoronDesign/Voron-2)
|
[Voron 2 Github](https://github.com/VoronDesign/Voron-2)
|
||||||
[Voron Design Docs - Slicer](https://docs.vorondesign.com/build/slicer/)
|
[Voron Design Docs - Slicer](https://docs.vorondesign.com/build/slicer/)
|
||||||
|
[Ellis-PIF-Profile](https://github.com/AndrewEllis93/Ellis-PIF-Profile)
|
||||||
@@ -28,6 +28,12 @@
|
|||||||
7. Run **ACCEPT** command
|
7. Run **ACCEPT** command
|
||||||
8. Run **SAVE_CONFIG** command
|
8. Run **SAVE_CONFIG** command
|
||||||
9. The nozzle bed offset is done for now.
|
9. The nozzle bed offset is done for now.
|
||||||
|
8. Bed heightmap calibration
|
||||||
|
1. Select from menu heightmap
|
||||||
|
2. Press on calibrate button
|
||||||
|
1. A good result of your work should be having variance of less than 0.3mm.
|
||||||
|
1. Things that can affect this: uneven bed magnet application, uneven surfaces of bed sheet, bed itself, uneven gantry or frame, to fast bed heating. The reason why we do this heightmap is to cancel out any imperfections via software.
|
||||||
|
3. Save with provided name "default" <- this way, it will be automatically picked up by config you imported earlier.
|
||||||
|
|
||||||
Thats it for tuning. You should be now ready for your first print. If you had any issues along the way, you can take a look at [very detailed tuning guide](https://github.com/AndrewEllis93/Print-Tuning-Guide) by AndrewEllis93. You can also find some helpful tuning print files [here](../Test_Prints/).
|
Thats it for tuning. You should be now ready for your first print. If you had any issues along the way, you can take a look at [very detailed tuning guide](https://github.com/AndrewEllis93/Print-Tuning-Guide) by AndrewEllis93. You can also find some helpful tuning print files [here](../Test_Prints/).
|
||||||
|
|
||||||
|
|||||||
Reference in New Issue
Block a user