k-space/Voron-V2.4
11
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Activity

updates config to match latest kits

Browse Source
This commit is contained in:
Sander Soots
2022-09-30 17:11:54 +03:00
parent 416ce3bcb1
commit 9686f4b904
2 changed files with 78 additions and 36 deletions
Download Patch File Download Diff File Expand all files Collapse all files

53
Manuals/Klipper/Fluidd/printer.cfg
View File

@@ -1,4 +1,4 @@
## Voron Design VORON2 250/300/350mm Spider TMC2209 UART config
## Voron Design VORON 2.4R2 250/300/350mm with Spider config, Lecktor kit
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
@@ -29,7 +29,7 @@
[mcu]
## Obtain definition by "ls -l /dev/serial/by-id/"
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_3E0019000F51383039343538-if00
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_2B002A001151383039343538-if00
## Uncomment below if you're using the Raspberry uart0 to communicate with Spider
#restart_method: command
@@ -49,7 +49,7 @@ square_corner_velocity: 5.0
[stepper_x]
## Connected to X-MOT (B Motor)
step_pin: PE11
dir_pin: !PE10
dir_pin: PE10
enable_pin: !PE9
rotation_distance: 40
microsteps: 32
@@ -87,7 +87,7 @@ stealthchop_threshold: 0
[stepper_y]
## Connected to Y-MOT (A Motor)
step_pin: PD8
dir_pin: !PB12
dir_pin: PB12
enable_pin: !PD9
rotation_distance: 40
microsteps: 32
@@ -250,12 +250,14 @@ enable_pin: !PD4
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
## 22.6789511 is a good starting point for Bondtech 5mm gears
## 34.37086 for Bondtech 8mm gears (Galileo)
rotation_distance: 22.90574 # CALIBRATED !
## 22.90574 # for Bondtech on afterburner
## 22.7923459 # for Bondtech on stealthburner
rotation_distance: 22.7923459 # CALIBRATED for Stealthburner
## Update Gear Ratio depending on your Extruder Type
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
## Use 80:20 for M4, M3.1
## Use 7.5:1 for Galileo
gear_ratio: 50:17 #BMG Gear Ratio
gear_ratio: 50:1 #for Galileo
microsteps: 32
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
@@ -268,7 +270,7 @@ sensor_pin: PC0
min_temp: 10
max_temp: 270
max_power: 1.0
min_extrude_temp: 190
min_extrude_temp: 180
control = pid
pid_kp = 26.213
pid_ki = 1.304
@@ -289,14 +291,33 @@ sense_resistor: 0.110
stealthchop_threshold: 0
##[filament_switch_sensor RunoutSensor]
##pause_on_runout: True
##runout_gcode:
## M117 FILAMENT RUNOUT
## error_tones
##insert_gcode:
## M117 FILAMENT OK
##pause_on_runout: False
##runout_gcode: F_CONSUMED
##switch_pin: ^PB13
##event_delay: 5.0
##event_delay: 4.0##
##[gcode_macro F_CONSUMED]
##variable_filament_consumed: 0
##variable_filament_lenght: 20 # length between the sensor and extruder
##gcode:
## # save current filament consumption
## SET_GCODE_VARIABLE MACRO=F_CONSUMED VARIABLE=filament_consumed VALUE={printer.print_stats.filament_used}
## # start checking filament consumption
## UPDATE_DELAYED_GCODE ID=DELAY_M600 DURATION=1##
##[delayed_gcode DELAY_M600]
##gcode:
## # use set for easier reading
## {% set consumed=printer["gcode_macro F_CONSUMED"].filament_consumed %}
## {% set length=printer["gcode_macro F_CONSUMED"].filament_lenght %}
## # check if predetermine length is reached
## {% if printer.print_stats.filament_used|float <= (consumed|float + length|float) %}
## # start looping this script every second
## UPDATE_DELAYED_GCODE ID=DELAY_M600 DURATION=1
## {% else %}
## error_tones
## PAUSE
## {% endif %}
#####################################################################
@@ -365,7 +386,7 @@ off_below: 0.10
[heater_fan controller_fan]
## Exhaust fan - In E2 OUT Positon
pin: PB3
max_power: 1.0
max_power: 0.5
shutdown_speed: 0.0
kick_start_time: 5.0
heater: heater_bed
@@ -375,7 +396,7 @@ fan_speed: 1.0
[heater_fan nevermore_fan]
# nevermore fan in fan3 connector
pin: PB2
max_power: 1.0
max_power: 0.8
shutdown_speed: 0.0
kick_start_time: 5.0
heater: heater_bed

61
Manuals/Klipper/Mainsail/printer.cfg
View File

@@ -1,4 +1,4 @@
## Voron Design VORON2 250/300/350mm Spider TMC2209 UART config
## Voron Design VORON 2.4R2 250/300/350mm with Spider config, Lecktor kit
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
@@ -29,7 +29,7 @@
[mcu]
## Obtain definition by "ls -l /dev/serial/by-id/"
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_3E0019000F51383039343538-if00
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_2B002A001151383039343538-if00
## Uncomment below if you're using the Raspberry uart0 to communicate with Spider
#restart_method: command
@@ -49,7 +49,7 @@ square_corner_velocity: 5.0
[stepper_x]
## Connected to X-MOT (B Motor)
step_pin: PE11
dir_pin: !PE10
dir_pin: PE10
enable_pin: !PE9
rotation_distance: 40
microsteps: 32
@@ -87,7 +87,7 @@ stealthchop_threshold: 0
[stepper_y]
## Connected to Y-MOT (A Motor)
step_pin: PD8
dir_pin: !PB12
dir_pin: PB12
enable_pin: !PD9
rotation_distance: 40
microsteps: 32
@@ -250,12 +250,14 @@ enable_pin: !PD4
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
## 22.6789511 is a good starting point for Bondtech 5mm gears
## 34.37086 for Bondtech 8mm gears (Galileo)
rotation_distance: 22.90574 # CALIBRATED !
## 22.90574 # for Bondtech on afterburner
## 22.7923459 # for Bondtech on stealthburner
rotation_distance: 22.7923459 # CALIBRATED for Stealthburner
## Update Gear Ratio depending on your Extruder Type
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
## Use 80:20 for M4, M3.1
## Use 7.5:1 for Galileo
gear_ratio: 50:17 #BMG Gear Ratio
gear_ratio: 50:1 #for Galileo
microsteps: 32
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
@@ -268,11 +270,11 @@ sensor_pin: PC0
min_temp: 10
max_temp: 270
max_power: 1.0
min_extrude_temp: 190
#control = pid
#pid_kp = 26.213
#pid_ki = 1.304
#pid_kd = 131.721
min_extrude_temp: 180
control = pid
pid_kp = 26.213
pid_ki = 1.304
pid_kd = 131.721
# Try to keep pressure_advance below 1.0
pressure_advance: 0.05
# Default is 0.040, leave stock
@@ -289,14 +291,33 @@ sense_resistor: 0.110
stealthchop_threshold: 0
##[filament_switch_sensor RunoutSensor]
##pause_on_runout: True
##runout_gcode:
## M117 FILAMENT RUNOUT
## error_tones
##insert_gcode:
## M117 FILAMENT OK
##pause_on_runout: False
##runout_gcode: F_CONSUMED
##switch_pin: ^PB13
##event_delay: 5.0
##event_delay: 4.0##
##[gcode_macro F_CONSUMED]
##variable_filament_consumed: 0
##variable_filament_lenght: 20 # length between the sensor and extruder
##gcode:
## # save current filament consumption
## SET_GCODE_VARIABLE MACRO=F_CONSUMED VARIABLE=filament_consumed VALUE={printer.print_stats.filament_used}
## # start checking filament consumption
## UPDATE_DELAYED_GCODE ID=DELAY_M600 DURATION=1##
##[delayed_gcode DELAY_M600]
##gcode:
## # use set for easier reading
## {% set consumed=printer["gcode_macro F_CONSUMED"].filament_consumed %}
## {% set length=printer["gcode_macro F_CONSUMED"].filament_lenght %}
## # check if predetermine length is reached
## {% if printer.print_stats.filament_used|float <= (consumed|float + length|float) %}
## # start looping this script every second
## UPDATE_DELAYED_GCODE ID=DELAY_M600 DURATION=1
## {% else %}
## error_tones
## PAUSE
## {% endif %}
#####################################################################
@@ -365,7 +386,7 @@ off_below: 0.10
[heater_fan controller_fan]
## Exhaust fan - In E2 OUT Positon
pin: PB3
max_power: 1.0
max_power: 0.5
shutdown_speed: 0.0
kick_start_time: 5.0
heater: heater_bed
@@ -375,7 +396,7 @@ fan_speed: 1.0
[heater_fan nevermore_fan]
# nevermore fan in fan3 connector
pin: PB2
max_power: 1.0
max_power: 0.8
shutdown_speed: 0.0
kick_start_time: 5.0
heater: heater_bed