diff --git a/Manuals/MCU_Firmware/Readme.md b/Manuals/MCU_Firmware/Readme.md
index 6514137..cac349e 100644
--- a/Manuals/MCU_Firmware/Readme.md
+++ b/Manuals/MCU_Firmware/Readme.md
@@ -90,5 +90,5 @@ You will need to write that serial down and use it in printer.cfg as this is you
 ### Back: [Manuals](../Readme.md)
 
 # Sources:
-[Voron Design Wiki](https://docs.vorondesign.com/build/software/spider_klipper.html)
+[Voron Design Wiki](https://docs.vorondesign.com/build/software/spider_klipper.html)  
 [Fysetc Spider Wiki](https://wiki.fysetc.com/Spider/)
\ No newline at end of file
diff --git a/Manuals/OperatingSoftware/Fluidd.md b/Manuals/OperatingSoftware/Fluidd.md
index e3cf06a..02e6170 100644
--- a/Manuals/OperatingSoftware/Fluidd.md
+++ b/Manuals/OperatingSoftware/Fluidd.md
@@ -37,5 +37,5 @@ As soon as you have Fluiddpi loaded, it is highly recommended that you make sure
 ### Back: [Manuals](../Readme.md)
 
 # Sources:
-[Voron Design Wiki Fluidd](https://docs.vorondesign.com/build/software/installing_fluidd.html)
-https://docs.fluidd.xyz/
\ No newline at end of file
+[Voron Design Wiki Fluidd](https://docs.vorondesign.com/build/software/installing_fluidd.html)  
+[Fluidd](https://docs.fluidd.xyz/)
\ No newline at end of file
diff --git a/Manuals/OperatingSoftware/MainsailOs.md b/Manuals/OperatingSoftware/MainsailOs.md
index e8fbb9e..5a9fa3a 100644
--- a/Manuals/OperatingSoftware/MainsailOs.md
+++ b/Manuals/OperatingSoftware/MainsailOs.md
@@ -39,5 +39,5 @@ The Mainsail manual installation process is documented in [the Mainsail docs](ht
 ### Back: [Manuals](../Readme.md)
 
 # Sources:
-[Voron Design Wiki Mainsail](https://docs.vorondesign.com/build/software/installing_mainsail.html#MainsailOS)
-https://docs.mainsail.xyz/
\ No newline at end of file
+[Voron Design Wiki Mainsail](https://docs.vorondesign.com/build/software/installing_mainsail.html#MainsailOS)  
+[Mainsail](https://docs.mainsail.xyz/)
\ No newline at end of file
diff --git a/Manuals/Slicer/Readme.md b/Manuals/Slicer/Readme.md
index 045c392..0fa5b25 100644
--- a/Manuals/Slicer/Readme.md
+++ b/Manuals/Slicer/Readme.md
@@ -8,6 +8,9 @@
 ## Where to set the model and textures:
 ![Examples](SS_Settings.png) 
 
+---
+### Back: [Manuals](../Readme.md)
+
 # Sources:
-[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)
+[Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)  
 [Voron 2 Github](https://github.com/VoronDesign/Voron-2)
diff --git a/Manuals/Test_Prints/Readme.md b/Manuals/Test_Prints/Readme.md
index 8d7fe16..452af20 100644
--- a/Manuals/Test_Prints/Readme.md
+++ b/Manuals/Test_Prints/Readme.md
@@ -5,5 +5,8 @@ The parts are representative of the tolerances and fits that are crucial to an e
 
 The filament card and caddy are both test prints as well as a good way to have a sample of each color filament you own for use later in project planning.
 
+---
+### Back: [Manuals](../Readme.md)
+
 # Sources:
 [Voron Extras Github](https://github.com/VoronDesign/Voron-Extras)
\ No newline at end of file