diff --git a/24h_wall_clock.jpg b/24h_wall_clock.jpg
new file mode 100644
index 0000000..faac8ab
Binary files /dev/null and b/24h_wall_clock.jpg differ
diff --git a/24h_wall_clock_1024.jpg b/24h_wall_clock_1024.jpg
new file mode 100644
index 0000000..20f46b0
Binary files /dev/null and b/24h_wall_clock_1024.jpg differ
diff --git a/README.md b/README.md
index d59009f..626db7f 100644
--- a/README.md
+++ b/README.md
@@ -1,5 +1,5 @@
 # 24h Wall Clock
-![Scorch marks for clock face](clock.svg "Scorch marks for the clock")
+![Cut 24h wall clock](24h_wall_clock_1024.jpg "Engraved and cut 24h wall clock with movement and hands installed")
 
 ## Why?
 Couldn't find a wall clock design I liked so made my own.
@@ -7,10 +7,10 @@ Couldn't find a wall clock design I liked so made my own.
 ## No, but why?
 I like the idea of a timepiece with one revolution per day instead of the one we're used to.
 Clock face was designed in OpenSCAD as manually positioning hour segments and applying changes would be very cumbersome.
-
+12 on top due to personal preference: daytime on top, nighttime on bottom (as indicated by the sun and moon).
 
 ## Engraving & Cutting with Laser
-As RDworks fails to properly read in the DXF exported by OpenSCAD, a detour through Inkscape is necessary (unless using Lightburn, I presume). If not using RDworks, skip following. From OpenSCAD export as SVG. In Inkscape save the exported SVG as a DXF file. That DXF file can be opened in RDworks.
+As RDworks fails to properly read in the DXF exported by OpenSCAD, a detour through Inkscape is necessary (unless using Lightburn, I presume). If not using RDworks, skip following. From OpenSCAD export as SVG. In Inkscape save the exported SVG as a DXF file. That DXF file can be opened in RDworks. Same procedure has to be done with `part_clock_outline.scad` to use as a cutting outline.
 
 Tips:
 - Cut against the wood grain, not along (as in + not =).